The characteristics of the synthetic textile wastewater are 1500 mg/L BOD, 2000 mg/L SS, 30 mg/L nitrogen, and no phosphorus. The characteristics of the domestic wastewater are 200 mg/L BOD, 240 mg/L SS, 35 mg/L nitrogen, and 7 mg/L phosphorus. Find the phosphorus concentrations in the mixture. The ratio of flow rate is domestic/textile = 4/1

The characteristics of the synthetic textile wastewater are 1500 mg/L BOD, 2000 mg/L SS, 30 mg/L nitrogen, and no phosphorus. The characteristics of the domestic wastewater are 200 mg/L BOD, 240 mg/L SS, 35 mg/L nitrogen, and 7 mg/L phosphorus. Find the phosphorus concentrations in the mixture. The ratio of flow rate is domestic/textile = 4/1

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

The characteristics of the synthetic textile wastewater are 1500 mg/L BOD, 2000 mg/L SS, 30 mg/L nitrogen, and no phosphorus. The characteristics of the domestic wastewater are 200 mg/L BOD, 240 mg/L SS, 35 mg/L nitrogen, and 7 mg/L phosphorus. Find the nitrogen concentrations in the mixture. The ratio of flow rate is domestic/textile = 4/1
The wastewater from a synthetic textile manufacturing plant is discharged to a municipal treatment plant for processing with domestic wastewater. The characteristics of the synthetic textile wastewater are 1500 mg/L BOD, 2000 mg/L SS, 30 mg/L nitrogen, and no phosphorus. The characteristics of the domestic wastewater are 200 mg/L BOD, 240 mg/L SS, 35 mg/L nitrogen, and 7 mg/L phosphorus. Find the BOD, SS of the mixture. The ratio of flow rate is domestic/textile = 4/1
The density of water at 4°C is 1000 kg/m3 at atmosphericpressure. The gravity acceleration constant (g) is 9.81 m/s2. Thespecific gravity of an industrial wastewater (SGww) is 1.32. Whatis the specific weight of this wastewater?
A wastewater with a BOD of 25mg/L is discharged through an outfall to a freshwater stream of mean velocity 0.1m/s. The DO downstream of the outfall is 8.5mg/L. Assume the deoxygenation rate is 0.25/d, the reaeration rate is 0.4 /d and the temperature of 20 degree C (DOs = 9.09mg/L). Compute for the ff: a) Critical distance b) minimum DO c) Oxygen deficit d) Critical time
A wastewater treatment plant discharges 2.16x107 L/hr of treated effluent with an ultimate BOD of 22.0 mg/L and dissolved oxygen concentration of 5.0 mg/L to a river. Upstream of the waste discharge, the river has a flow of 9.0 m3/s, an ultimate BOD of 10.0 mg/L, and dissolved oxygen concentration of 7.0 mg/L. Both the river and effluent are at 20°C. After the river and effluent mix, the river flows at a velocity of 0.13 m/s and has a depth of 1.8 m. The deoxygenation rate constant for the waste is 0.45 day-1. A fish hatchery is located 9.6 km downstream of the waste discharge. The hatchery requires 5.0 mg/L DO for healthy fish growth and reproduction. Is the hatchery requirement being met? show all work
Assume that taal lake is 100m2 and its average height is 5ft. Wastewater thatflows into the lake are the following: a. Food square kitchen waste 5m3/hr; Total Dissolved Solids (TDS) is 50g/L whichoperates 8hrs per dayb. CIH 5m3/hr kitchen waste; TDS is 20mg/L which operates 4hrs per dayc. PCH 20m3/day diluted laboratory waste ; TDS = 40mg/L (1)Determine the volume of wastewater which taal lake can still be contained withoutrainfall.(2)During operational hours a heavy rain fall, the rain gauge reading is 1.5m. Will the taalLake overflow? What is the volume of water that will over flow?(3). Compute the TDS concentration of the overflow.
a. The wastewater from a manufacturing treatment plant is discharged to a municipal `treatment plant for processing with domestic wastewater. The characteristics of the wastewater from the manufacturing treatment plant are 3500 mg/l BOD, 4500 mg/l SS, 70 mg/l nitrogen and 2 mg/l phosphorous. The characteristics of the domestic wastewater are 350 mg/l BOD, 285 mg/l SS, 50 mg/l N and 11 mg/l P. If the required BOD/N/P weight ratio is 100/5/1, what is the minimum quantity of domestic wastewater required per 1000 gallons of manufacturing wastewater to provide adequate nutrients for biological treatment and the concentration of SS in the combined wastewater? b. What additional of NH4OH and H3PO4 would be required in pounds per million gallons of wastewater to provide the necessary nutrient levels for the treatment of the manufacturing wastewater described above (a) if the domestic wastewater had not been combined with it.
The shrimp processing plant generates 0.012 m3/s of wastewater each day. The wastewater is treated in an activated sludge plant. The average BOD5 of the raw wastewater before primary settling is 1400 mg/L. The aeration tank has effective liquid dimensions of 8.0 m wide by 8.0 m long by 5.0 m deep. The plant operating parameters are as follows: Soluble BOD5 after primary settling = 966 mg/L MLVSS = 2000 mg/L MLSS = 1.25 (MLVS) Settled sludge volume after 30 min = 225 mL/L Aeration tank liquid temperature = 15°C Determine the following: Return Activated Sludge (RAS) flow rate and Wasting Activated Sludge (WAS) flow rate.
The discharge from the Renenutet sugar beet plant causes the DO at the critical point to fall to 4.0 mg/L. The Meskhenet Stream has a negligible BOD and the initial deficit after the river and wastewater have mixed is zero. What DO will result if the concentration of the waste(L_w) is reduced by 50%? Assume that the flows remain the same and that the saturation value of DO is 10.83 mg/L in both cases.
As an operator of a wastewater treatment facility, you have learned that your plant runs well at an SRT (based on MLVSS (X) in the aeration basin) of 12 days. If today’s MLVSS (X) concentration is 2,700 mg/L and the RAS (Xr) concentration is 5,500 mg/L, how many L of sludge should you waste from the secondary clarifier today? Other design conditions: Average influent flow = 12,000 m3/d Influent soluble BOD = 150 mg/L Required effluent TSS = 30 mg/L Aeration tank Volume = 1,000 m3
A 76000 m'id domestic waste discharge has a concentration of 22 mg/L of ammonia nitrogen. If the receiving stream contains 1.5 mg/L and the maximum allowable concentration is 3.5 mg/L, compute the dilution of streamflow required in m'/s.
You have a DAF with wastewater flow of 650 L/min, with a solids concentration of 15 g/L. Density of the wastewater is 1100 kg/m3. What air flow is required for an air to solids ratio of 0.3. Assume density of air is 1.2 kg/m3.