Akron Coating and Adhesives (ACA) produces a hot melt adhesive that provides a strong bond between metals and thermoplastics when used for weather stripping, seals, gaskets, hand grips for tools, appliances, etc. ACA claims that by eliminating a primer coat, manufacturers can cut costs and reduce scrap. If Porter Cable is able to save $60,000 now and $40,000 per year thereafter by switching to the new adhesive, what is the present worth of the savings for three years at an interest rate of 10% per year?
Q: Jim D'Addario of the well-known guitar and bass string factory, D'Addario Strings in Long Island,…
A: Net Present Value(NPV) is excess of present value(PV) of all cash inflows over initial cash outlay…
Q: Flowton Products enjoys a steady demand for stainless steel infiltrators used in a number of…
A: The time it takes to recoup the value of an investment is mentioned because of the payback period.…
Q: than Butler, process engineer, knows that the acceptance of a new process design will depend on its…
A: Requirement1 Schedule of cash flow…
Q: Comfy Corporation manufactures furniture in several divisions, including the patio furniture…
A: Return on investment (ROI): This financial ratio evaluates how efficiently the assets are used in…
Q: Michelin is considering going “lights out” in the mixing area of the business that operates 24/7.…
A: Replacement of an asset is made when a better alternative is available and the current asset is…
Q: TufStuff, Inc., sells a wide range of drums, bins, boxes, and other containers that are used in the…
A: Particulars Amount ($) Selling Price per unit 181 Less: Variable Cost Direct…
Q: A company must decide between scrapping or reworking units that do not pass inspection. The company…
A: Step 1: Workings for the answer:
Q: Come-Clean Corporation produces a variety of cleaning compounds and solutions for both industrial…
A: Since we only answer up to 3 sub-parts, we’ll answer the first 3. Please resubmit the question and…
Q: Kate's Candy Corporation makes chewy chocolate candies at a plant in Winston-Salem, North Carolina.…
A: Net present value is the present value of all the future cash inflows less the present value of cash…
Q: A large food-processing corporation is considering using laser technology to speed up and eliminate…
A: MARR stands for Minimum acceptable rate of return.It reflects this opportunity cost of capital.
Q: Management of NUBD Corporation is considering whether to purchase a new model L37 machine costing…
A: SOLUTION- OPPORTUNITY COST IS THE PROFIT LOST WHEN ONE ALTERNATIVE IS SELECTED OVER ANOTHER.
Q: It is planning to reduce its labor costs by automating a critical task that is currently performed…
A: Present value means the actual amount is adjusted with the interest rate so as to get the present…
Q: McDermott Company has developed a new industrial component called IC-75. The company is excited…
A: Reference Value- A reference value is the recognized and accurate measurement for each part. The…
Q: Sinbo Electronics is trying to reduce supply chain risk by making more responsible make-buy…
A: Break-even quantity is that level of sales at which the company earns zero profit and incurs zero…
Q: TufStuff, Inc., sells a wide range of drums, bins, boxes, and other containers that are used in the…
A: The question is related to Decision Making between make or buy the product from outside. The…
Q: Barron Chemical uses a thermoplastic polymer to enhance the appearance of certain RV panels. The…
A: A discount rate at which the net present worth of an investment is equal to zero is term as internal…
Q: Jackson Inc. disposes of other companies’ toxic waste. Currently, Jackson loads the waste by…
A: Given is: Cost of Machine = $200,000 Reduction in Labour Cost = $5 per load Loads in a year = 10000
Q: ABC Manufacturing Company is planning to reduce its labor costs by automating a critical task that…
A: The present value method is a method of finding the profitability of a project by discounting the…
Q: A process control manager is considering two robots to improve materials-handling capacity in the…
A: Robot X : First Cost = $ 74000 Annual M&O Cost = $ 31,000 Salvage Value = $ 35,000 Revenue…
Q: Wilmington Chemical Company produces three products: ethylene, butane, and ester. Each of these…
A: Production Bottleneck: Production Bottleneck is a situation of constraint in the manufacturing…
Q: BTS manufactures several components for a clock radio and assembles these parts as well. Recently,…
A: This question deals with the decision making aspect of the organization. It is a decision making…
Q: McDermott Company has developed a new industrial component called IC-75. The company is excited…
A: Since there are multiple subparts, we will answer only first three subparts. If you want remaining…
Q: Novak Fashions needs to replace a beltloop attacher that currently costs the company $58,000 in…
A: Accounting rate of return The accounting rate of return is the return that is calculated by equating…
Q: A process control manager is considering two robots to improve materials-handling capacity in the…
A: Given data: A process control manager is considering two robots to improve materials-handling…
Q: An automobile manufacturer is considering a change in an assembly line that should save moneyby…
A:
Q: The management of International Aluminium Co. is considering whether to process aluminum ingot…
A: Process Costing: It is the method in which the cost of a product is determined on the basis of the…
Q: Sturbridge Company manufactures fine furniture and grandfather clocks. Sturbridge has an excellent…
A: Indirect cost are those which cannot directly allocate to cost of production. The correct option and…
Q: Liquid Sleeve, Inc. is a company that makes a sealing solution for machine shaft surfaces that have…
A: NPV A variance between cash outflow (PV) and cash inflow (PV) over a time period.
Q: A small company that manufactures vibration isolation platforms is trying to decide whether it…
A: The question is based on the concept of replacement analysis to determine Existing system D can be…
Q: TufStuff, Inc., sells a wide range of drums, bins, boxes, and other containers that are used in the…
A:
Q: Comfy Corporation manufactures furniture in several divisions, including the patio furniture…
A: Return on investment (ROI): This financial ratio evaluates how efficiently the assets are used in…
Q: A mechanical engineer who designs and sells equipment that automates manual labor processes is…
A: Workings: First cost = $ 170000 Estimated operating cost = $ 54000 Useful life = 5 years Extended…
Q: Comfy Corporation manufactures furniture in several divisions, including the patio furniture…
A: Return on investment (ROI): This financial ratio evaluates how efficiently the assets are used in…
Q: McDermott Company has developed a new industrial component called IC-75. The company is excited…
A: The question is based on the concept of Cost Accounting. As per the Bartleby guidelines we are…
Q: A process control manager is considering two robots to improve materials handling capacity in the…
A: Calculation of Robot to be selected on the basis of ROR is shown below: Formula sheet for the above…
Q: The Pittsburgh division of Vermont Machinery, Inc., manufactures drill bits.One of the production…
A: 1.
Q: Mountain Gear has been using the same machines to make its name-brand clothing for the last five…
A: Machines are generally replaced for various reasons, the machine gets obsolete due to advancement in…
Q: A small company that manufactures vibration isolation platforms is trying to decide whether it…
A: With the passage of time, old equipment or assets become less efficient and profitable. These old…
Q: McDermott Company has developed a new industrial component called IC-75. The company is excited…
A: 1) Reference value = Product cost + Maintenance cost = $1200 +$200…
Q: CleanTech manufactures equipment to mitigate the environmental effects of waste. (a) If Product A…
A: a.
Q: The New England Soap Company is considering adding some processing equipment to the plant to aid in…
A: Given information : Putting values :
Q: Smart Manufacturing Company is planning to reduce its labor costs by automating a critical task that…
A: Capital Budgeting Techniques helps to decide the investment project that should be selected.
Q: Hemisphere Electric Coop (HEC) is planning to outsource its 51-person information technology (IT)…
A: PW is a net benefit’s value in today which will generate in future. Discounting technique is used to…
Q: loaded cost of $600,000 per year are used to manually weigh real rubber, synthetic rubber, carbon…
A: Calculation of Equivalent uniform equal cost to determine the option to be opt. Net Present value…
Q: Choco-Lots Candy Co. makes chewy chocolate candies at a plant in Winston-Salem, North Carolina.…
A: Net present value: It is one of the important techniques of capital budgeting in financial…
Q: Explain the further information you would need in order to report on the benefits and problems for…
A: Contribution margin means selling price - variable cost and profit means Contribution - Fixed Costs…
Q: TufStuff, Inc., sells a wide range of drums, bins, boxes, and other containers that are used in the…
A: Direct labour is a key factor in this problem and it is debatable that…
Akron Coating and Adhesives (ACA) produces a hot melt adhesive that provides a strong bond between metals and thermoplastics when used for weather stripping, seals, gaskets, hand grips for tools, appliances, etc. ACA claims that by eliminating a primer coat, manufacturers can cut costs and reduce scrap. If Porter Cable is able to save $60,000 now and $40,000 per year thereafter by switching to the new adhesive, what is the present worth of the savings for three years at an interest rate of 10% per year?
Trending now
This is a popular solution!
Step by step
Solved in 3 steps with 2 images
- Mallette Manufacturing, Inc., produces washing machines, dryers, and dishwashers. Because of increasing competition, Mallette is considering investing in an automated manufacturing system. Since competition is most keen for dishwashers, the production process for this line has been selected for initial evaluation. The automated system for the dishwasher line would replace an existing system (purchased one year ago for 6 million). Although the existing system will be fully depreciated in nine years, it is expected to last another 10 years. The automated system would also have a useful life of 10 years. The existing system is capable of producing 100,000 dishwashers per year. Sales and production data using the existing system are provided by the Accounting Department: All cash expenses with the exception of depreciation, which is 6 per unit. The existing equipment is being depreciated using straight-line with no salvage value considered. The automated system will cost 34 million to purchase, plus an estimated 20 million in software and implementation. (Assume that all investment outlays occur at the beginning of the first year.) If the automated equipment is purchased, the old equipment can be sold for 3 million. The automated system will require fewer parts for production and will produce with less waste. Because of this, the direct material cost per unit will be reduced by 25 percent. Automation will also require fewer support activities, and as a consequence, volume-related overhead will be reduced by 4 per unit and direct fixed overhead (other than depreciation) by 17 per unit. Direct labor is reduced by 60 percent. Assume, for simplicity, that the new investment will be depreciated on a pure straight-line basis for tax purposes with no salvage value. Ignore the half-life convention. The firms cost of capital is 12 percent, but management chooses to use 20 percent as the required rate of return for evaluation of investments. The combined federal and state tax rate is 40 percent. Required: 1. Compute the net present value for the old system and the automated system. Which system would the company choose? 2. Repeat the net present value analysis of Requirement 1, using 12 percent as the discount rate. 3. Upon seeing the projected sales for the old system, the marketing manager commented: Sales of 100,000 units per year cannot be maintained in the current competitive environment for more than one year unless we buy the automated system. The automated system will allow us to compete on the basis of quality and lead time. If we keep the old system, our sales will drop by 10,000 units per year. Repeat the net present value analysis, using this new information and a 12 percent discount rate. 4. An industrial engineer for Mallette noticed that salvage value for the automated equipment had not been included in the analysis. He estimated that the equipment could be sold for 4 million at the end of 10 years. He also estimated that the equipment of the old system would have no salvage value at the end of 10 years. Repeat the net present value analysis using this information, the information in Requirement 3, and a 12 percent discount rate. 5. Given the outcomes of the previous four requirements, comment on the importance of providing accurate inputs for assessing investments in automated manufacturing systems.At Stardust Gems, a faux gem and jewelry company, the setting department is a bottleneck. The company is considering hiring an extra worker, whose salary will be $67,000 per year, to ease the problem. Using the extra worker, the company will be able to produce and sell 9,000 more units per year. The selling price per unit is $20. The cost per unit currently is $15.85 as shown: What is the annual financial impact of hiring the extra worker for the bottleneck process?Artisan Metalworks has a bottleneck in their production that occurs within the engraving department. Jamal Moore, the COO, is considering hiring an extra worker, whose salary will be $55,000 per year, to solve the problem. With this extra worker, the company could produce and sell 3,000 more units per year. Currently, the selling price per unit is $25 and the cost per unit is $7.85. Using the information provided, calculate the annual financial impact of hiring the extra worker.
- Rolertyme Company manufactures roller skates. With the exception of the rollers, all parts of the skates are produced internally. Neeta Booth, president of Rolertyme, has decided to make the rollers instead of buying them from external suppliers. The company needs 100,000 sets per year (currently it pays 1.90 per set of rollers). The rollers can be produced using an available area within the plant. However, equipment for production of the rollers would need to be leased (30,000 per year lease payment). Additionally, it would cost 0.50 per machine hour for power, oil, and other operating expenses. The equipment will provide 60,000 machine hours per year. Direct material costs will average 0.75 per set, and direct labor will average 0.25 per set. Since only one type of roller would be produced, no additional demands would be made on the setup activity. Other overhead activities (besides machining and setups), however, would be affected. The companys cost management system provides the following information about the current status of the overhead activities that would be affected. (The supply and demand figures do not include the effect of roller production on these activities.) The lumpy quantity indicates how much capacity must be purchased should any expansion of activity supply be needed. The purchase price is the cost of acquiring the capacity represented by the lumpy quantity. This price also represents the cost of current spending on existing activity supply (for each block of activity). Production of rollers would place the following demands on the overhead activities: Producing the rollers also means that the purchase of outside rollers will cease. Thus, purchase orders associated with the outside acquisition of rollers will drop by 5,000. Similarly, the moves for the handling of incoming orders will decrease by 200. The company has not inspected the rollers purchased from outside suppliers. Required: 1. Classify all resources associated with the production of rollers as flexible resources and committed resources. Label each committed resource as a short- or long-term commitment. How should we describe the cost behavior of these short- and long-term resource commitments? Explain. 2. Calculate the total annual resource spending (for all activities except for setups) that the company will incur after production of the rollers begins. Break this cost into fixed and variable activity costs. In calculating these figures, assume that the company will spend no more than necessary. What is the effect on resource spending caused by production of the rollers? 3. Refer to Requirement 2. For each activity, break down the cost of activity supplied into the cost of activity output and the cost of unused activity.Bienestar, Inc., has two plants that manufacture a line of wheelchairs. One is located in Kansas City, and the other in Tulsa. Each plant is set up as a profit center. During the past year, both plants sold their tilt wheelchair model for 1,620. Sales volume averages 20,000 units per year in each plant. Recently, the Kansas City plant reduced the price of the tilt model to 1,440. Discussion with the Kansas City manager revealed that the price reduction was possible because the plant had reduced its manufacturing and selling costs by reducing what was called non-value-added costs. The Kansas City manufacturing and selling costs for the tilt model were 1,260 per unit. The Kansas City manager offered to loan the Tulsa plant his cost accounting manager to help it achieve similar results. The Tulsa plant manager readily agreed, knowing that his plant must keep pacenot only with the Kansas City plant but also with competitors. A local competitor had also reduced its price on a similar model, and Tulsas marketing manager had indicated that the price must be matched or sales would drop dramatically. In fact, the marketing manager suggested that if the price were dropped to 1,404 by the end of the year, the plant could expand its share of the market by 20 percent. The plant manager agreed but insisted that the current profit per unit must be maintained. He also wants to know if the plant can at least match the 1,260 per-unit cost of the Kansas City plant and if the plant can achieve the cost reduction using the approach of the Kansas City plant. The plant controller and the Kansas City cost accounting manager have assembled the following data for the most recent year. The actual cost of inputs, their value-added (ideal) quantity levels, and the actual quantity levels are provided (for production of 20,000 units). Assume there is no difference between actual prices of activity units and standard prices. Required: 1. Calculate the target cost for expanding the Tulsa plants market share by 20 percent, assuming that the per-unit profitability is maintained as requested by the plant manager. 2. Calculate the non-value-added cost per unit. Assuming that non-value-added costs can be reduced to zero, can the Tulsa plant match the Kansas City per-unit cost? Can the target cost for expanding market share be achieved? What actions would you take if you were the plant manager? 3. Describe the role that benchmarking played in the effort of the Tulsa plant to protect and improve its competitive position.Quality Clothing, Inc., produces skorts and jumper uniforms for schoolchildren. In the process of cutting out the cloth pieces for each product, a certain amount of scrap cloth is produced. Quality has been selling this cloth scrap to Jorges Scrap Warehouse for $3.25 per pound. Last year, the company sold 40,000 lb. of scrap, which would be enough to make 10,000 teddy bears that the management of Quality is now interested in producing. Their processes would need some reprogramming, particularly in the cutting and stitching processes, but it would require no additional worker training. However, new packaging would be needed. The total variable cost to produce the teddy bears $3.85. Fixed costs would increase by $95,000 per year for the lease of the packaging equipment and Quality estimates it could produce and sell 10,000 teddy bears per year. Finished teddy bears could be sold for $18.00 each. Should Quality continue to sell the scrap cloth or should Quality process the scrap into teddy bears to sell?
- ZZOOM, Inc., has decided to discontinue manufacturing its Z Best model. Currently, the company has 4,600 partially completed Z Best models on hand. The government has put a recall on a particular part in the Z Best model, so each base model must now be reworked to accommodate the style of the new part. The company has spent $110 per unit to manufacture these Z Best models to their current state. Reworking each Z Best model will cost $22 for materials and $25 for direct labor. In addition, $9 of variable overhead and $34 of allocated fixed overhead (relating primarily to depreciation of plant and equipment) will be allocated per unit. If ZZOOM completes the Z Best models, it can sell them for $180 per unit. On the other hand, another manufacturer is interested in purchasing the partially completed units for $105 each and converting them into Z Plus models. Prepare a differential analysis per unit to determine if ZZOOM should complete the Z Best models or sell them in their current state.Shelby Industries has a capacity to produce 45.000 oak shelves per year and is currently selling 40,000 shelves for $32 each. Martin Hardwoods has approached Shelby about buying 1,200 shelves for a new project and is willing to pay $26 each. The shelves can be packaged in bulk; this saves Shelby $1.50 per shelf compared to the normal packaging cost. Shelves have a unit variable cost of $27 with fixed costs of $350,000. Because the shelves dont require packaging, the unit variable costs for the special order will drop from $27 per shelf to $25.50 per shelf. Shelby has enough idle capacity to accept the contract. What is the minimum price per shelf that Shelby should accept for this special order?Basuras Waste Disposal Company has a long-term contract with several large cities to collect garbage and trash from residential customers. To facilitate the collection, Basuras places a large plastic container with each household. Because of wear and tear, growth, and other factors, Basuras places about 200,000 new containers each year (about 20% of the total households). Several years ago, Basuras decided to manufacture its own containers as a cost-saving measure. A strategically located plant involved in this type of manufacturing was acquired. To help ensure cost efficiency, a standard cost system was installed in the plant. The following standards have been established for the products variable inputs: During the first week in January, Basuras had the following actual results: The purchasing agent located a new source of slightly higher-quality plastic, and this material was used during the first week in January. Also, a new manufacturing process was implemented on a trial basis. The new process required a slightly higher level of skilled labor. The higher- quality material has no effect on labor utilization. However, the new manufacturing process was expected to reduce materials usage by 0.25 pound per container. Required: 1. CONCEPTUAL CONNECTION Compute the materials price and usage variances. Assume that the 0.25 pound per container reduction of materials occurred as expected and that the remaining effects are all attributable to the higher-quality material. Would you recommend that the purchasing agent continue to buy this quality, or should the usual quality be purchased? Assume that the quality of the end product is not affected significantly. 2. CONCEPTUAL CONNECTION Compute the labor rate and efficiency variances. Assuming that the labor variances are attributable to the new manufacturing process, should it be continued or discontinued? In answering, consider the new processs materials reduction effect as well. Explain. 3. CONCEPTUAL CONNECTION Refer to Requirement 2. Suppose that the industrial engineer argued that the new process should not be evaluated after only one week. His reasoning was that it would take at least a week for the workers to become efficient with the new approach. Suppose that the production is the same the second week and that the actual labor hours were 9,000 and the labor cost was 99,000. Should the new process be adopted? Assume the variances are attributable to the new process. Assuming production of 6,000 units per week, what would be the projected annual savings? (Include the materials reduction effect.)
- Variety Artisans has a bottleneck in their production that occurs within the engraving department. Arjun Naipul, the COO, is considering hiring an extra worker, whose salary will be $45,000 per year, to solve the problem. With this extra worker, the company could produce and sell 3,500 more units per year. Currently, the selling price per unit is $18 and the cost per unit is $5.85. Using the information provided, calculate the annual financial impact of hiring the extra worker.Country Diner currently makes cookies for its boxed lunches. It uses 40,000 cookies annually in the production of the boxed lunches. The costs to make the cookies are: A potential supplier has offered to sell Country Diner the cookies for $0.85 each. If the cookies are purchased, 10% of the fixed overhead could be avoided. If Jason accepts the offer, what will the effect on profit be?Nico Parts, Inc., produces electronic products with short life cycles (of less than two years). Development has to be rapid, and the profitability of the products is tied strongly to the ability to find designs that will keep production and logistics costs low. Recently, management has also decided that post-purchase costs are important in design decisions. Last month, a proposal for a new product was presented to management. The total market was projected at 200,000 units (for the two-year period). The proposed selling price was 130 per unit. At this price, market share was expected to be 25 percent. The manufacturing and logistics costs were estimated to be 120 per unit. Upon reviewing the projected figures, Brian Metcalf, president of Nico, called in his chief design engineer, Mark Williams, and his marketing manager, Cathy McCourt. The following conversation was recorded: BRIAN: Mark, as you know, we agreed that a profit of 15 per unit is needed for this new product. Also, as I look at the projected market share, 25 percent isnt acceptable. Total profits need to be increased. Cathy, what suggestions do you have? CATHY: Simple. Decrease the selling price to 125 and we expand our market share to 35 percent. To increase total profits, however, we need some cost reductions as well. BRIAN: Youre right. However, keep in mind that I do not want to earn a profit that is less than 15 per unit. MARK: Does that 15 per unit factor in preproduction costs? You know we have already spent 100,000 on developing this product. To lower costs will require more expenditure on development. BRIAN: Good point. No, the projected cost of 120 does not include the 100,000 we have already spent. I do want a design that will provide a 15-per-unit profit, including consideration of preproduction costs. CATHY: I might mention that post-purchase costs are important as well. The current design will impose about 10 per unit for using, maintaining, and disposing our product. Thats about the same as our competitors. If we can reduce that cost to about 5 per unit by designing a better product, we could probably capture about 50 percent of the market. I have just completed a marketing survey at Marks request and have found out that the current design has two features not valued by potential customers. These two features have a projected cost of 6 per unit. However, the price consumers are willing to pay for the product is the same with or without the features. Required: 1. Calculate the target cost associated with the initial 25 percent market share. Does the initial design meet this target? Now calculate the total life-cycle profit that the current (initial) design offers (including preproduction costs). 2. Assume that the two features that are apparently not valued by consumers will be eliminated. Also assume that the selling price is lowered to 125. a. Calculate the target cost for the 125 price and 35 percent market share. b. How much more cost reduction is needed? c. What are the total life-cycle profits now projected for the new product? d. Describe the three general approaches that Nico can take to reduce the projected cost to this new target. Of the three approaches, which is likely to produce the most reduction? 3. Suppose that the Engineering Department has two new designs: Design A and Design B. Both designs eliminate the two nonvalued features. Both designs also reduce production and logistics costs by an additional 8 per unit. Design A, however, leaves post-purchase costs at 10 per unit, while Design B reduces post-purchase costs to 4 per unit. Developing and testing Design A costs an additional 150,000, while Design B costs an additional 300,000. Assuming a price of 125, calculate the total life-cycle profits under each design. Which would you choose? Explain. What if the design you chose cost an additional 500,000 instead of 150,000 or 300,000? Would this have changed your decision? 4. Refer to Requirement 3. For every extra dollar spent on preproduction activities, how much benefit was generated? What does this say about the importance of knowing the linkages between preproduction activities and later activities?