An undamped spring mass system has a mass of 10 kg and a spring stiffness of 2250 N/m. It is excited by a harmonic force having a sine function characteristic with amplitude of 100 and an excitation frequency of 15 rad/s. The initial displacement and the velocity are 0.15 m and 1.5 m/s respectively. The frequency ratio is: Choose # The Particular solution at t=2s Choose Finish

An undamped spring mass system has a mass of 10 kg and a spring stiffness of 2250 N/m. It is excited by a harmonic force having a sine function characteristic with amplitude of 100 and an excitation frequency of 15 rad/s. The initial displacement and the velocity are 0.15 m and 1.5 m/s respectively. The frequency ratio is: Choose # The Particular solution at t=2s Choose Finish

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A 65 kg painted sewing machine has an imbalance value of 0.15 kgm in rotation. The machine operates at 125 Hz and is located on the ground with a spring coefficient of 2 x 106 N / m and a dimensionless attenuation coefficient of 0.12. Find the uniform regime amplitude of the machine.
A particular naturally vibrating system is subject to damping. The system consists of a small mass m = 0.1 kg, the system stiffness k = 200 Nm-1 and the damping coefficient c = 0.25 kgs-1 . Determine the values of the natural and damped frequencies, the damping factor, damping ratio, periodic time and logarithmic decrement. Sketch and describe the nature of the motion
A heavy machine, weighing 3000 N, is supported on a resilient foundation. The static deflection of the foundation due to the weight of the machine is found to be 7.5 cm. It is observed that the machine vibrates with an amplitude of 1 cm when the base of the foundation is subjected to harmonic oscillation at the undamped natural frequency of the system with an amplitude of 0.25 cm. Find a. the damping constant of the foundation, b. the dynamic force amplitude on the base, and c. the amplitude of the displacement of the machine relative to the base.
A spring-mass-damper system oscillating about the horizontal surface is subjected to anexternal force of F = 300 sin (6)(t), where 300 is in Newtons and 6 is in radians per second. Thesystem has a mass 90 [kg], a damping coefficient of 78 [N ⋅ s/m] and a spring constant of300 [N⁄m]. The system is both given an initial displacement of 1.2 [m] and an initial velocity of 1.4[m⁄s].a. Using Method of Undetermined Coefficients, determine the particular solution for thedisplacement function.b. Determine the unknown coefficients for the homogeneous solution using the initialconditions (Note: the external force already works at t = 0).c. Determine the position, velocity, and acceleration of the system after 10 seconds.
A 2.50-kg object is attached to a spring with a force constant of 4.50 N/m. The object rests on a horizontal surface that has a viscous, oily substance spread evenly on it. The object is pulled 15.0 cm to the right of the equilibrium position and set into harmonic motion. After ?1=2.00 s the amplitude has fallen to 7.00 cm due to frictional losses in the oil. Calculate the damping constant ? for the oil.
The structure shown in figure has a mass of 100 kg and a translational stiffness of 40,000 N/m. It is excited by a harmonic force having an amplitude Po = 500 N and an excitation frequency ω = 15 rad/s. The damping factor for the structure is ξ = 0.1. The initial conditions are u(0) = 6 cm and ώ(0) = 0. For the steady-state vibration determine: (a) The amplitude of the stady-state displacement. (b) Its phase with respect to the exciting force. (c) The maximum velocity and acceleration of the response. (d) Determine the equation that describes the total displaement of the structure as a function of time.
Two mass-spring systems are experiencing damped harmonic motion, both at 0.7 cycles per second and both with an initial maximum displacement of 12 cm. The first has a damping constant of 0.6, and the second has a damping constant of 0.2. a. Find functions of the form to model the motion in each case. b. How do they differ? (Hint: graph the two functions)
For a system with mass 10 kg, spring constant 100 N/m, damping ratio 1 kg/s, rotating unbalance of 0.1 kg, radius 100 cm, and driving frequency 50 Hz, what is the amplitude of the particular solution? What is the phase lag of the particular solution?
A two degree of freedom damped system has natural frequencies 2 rad/s and 3 rad/s and corresponding mode shapes {21}{ 2 1 } and {1−1}{ 1 − 1 } . A damping ratio of 2% is assumed for both modes. The initial displacement is {10}{ 1 0 }mm and initial velocity is {21}{ 2 1 }mm/s. The displacement of the first degree of freedom in mm at time t=3 s is
A damped single degree of freedom mass–spring system has a mass m = 3 kg,a spring stiffness k = 2700 N/m, and a damping coefficient c = 18 N·s/m. Themass is subjected to a harmonic force which has an amplitude F0 = 20 N anda frequency ωf = 15 rad/s. The initial conditions are x0 = 4 cm, and x˙0 = 0.Determine the displacement, velocity, and acceleration of the mass after timet = 0.5 s.
A machine part of mass 1.95 Kg vibrates in a viscous medium. Determine the damping coefficient when a harmonic exciting force of 24.46 N results in resonant amplitude of 1.27 cm with a period of 0.20s.
Spring mass system has mass of 30 kg and natural frequency of .80 rad/s. Determine the stiffness of the spring.