An unknown sample containing mixed alkali (NaOH, NaHCO3, or Na2CO3) was analyzed using t double flask method. A 250 mg sample was dissolved in 250 mL CO2 free water. A 20.0 mL aliq of this sample required 11.3 mL of 0.009125 M HCI solution to reach the phenolphthalein end point. Another 29.0 mL aliquot of the sample was titrated to the bromocresol green endpoint u 31.1 mL of the standard acid. What is/are the component/s of the sample? O Cannot be determined O NAHCO, only O NAOH and Na,CO3

An unknown sample containing mixed alkali (NaOH, NaHCO3, or Na2CO3) was analyzed using t double flask method. A 250 mg sample was dissolved in 250 mL CO2 free water. A 20.0 mL aliq of this sample required 11.3 mL of 0.009125 M HCI solution to reach the phenolphthalein end point. Another 29.0 mL aliquot of the sample was titrated to the bromocresol green endpoint u 31.1 mL of the standard acid. What is/are the component/s of the sample? O Cannot be determined O NAHCO, only O NAOH and Na,CO3

Fundamentals Of Analytical Chemistry

9th Edition

ISBN:9781285640686

Author:Skoog

Publisher:Skoog

Chapter16: Applications Of Neutralization Titrations

Section: Chapter Questions

Problem 16.32QAP

See similar textbooks

Similar questions

An unknown sample containing mixed alkali (naoh, nahco3, or na2co3) was analyzed using the double flask method. a 250 mg sample was dissolved in 250 ml co2 free water. a 20.0 ml aliquot of this sample required 11.3 ml of 0.009125 m hcl solution to reach the phenolphthalein end point. another 29.0 ml aliquot of the sample was titrated to the bromocresol green endpoint using 31.1 ml of the standard acid. how many millimoles of the components are there in the original solid sample
A sample of an infusion was diluted 10 ml to 250 ml and then 10 ml to 200 ml. It was thenanalysed and was found to contain sodium at 0.789 mg/100 ml. Calculate the concentrationof sodium in the original sample in %w/v. The sample was composed of a mixture of sodiumlactate and sodium carbonate in equimolar amounts. Calculate the amount of sodiumlactate and sodium carbonate in mg/10 ml of the sample (Na = 23, lactate = 89, carbonate =60)
A limestone sample weighing 400 mg was dissolved in acid treated with excess sodium oxalate. The solution was made basic and the resulting calcium oxalate was filtered, washed and redissolved in dilute acid. This solution required 14.0 mL of 0.00865 M KMnO4. What is the % Ca of the limestone. CaC2O4(s) + 2H+ ⇌ Ca2+ + H2C2O45H2C2O4 + 2MnO4- + 6H+ ⇌ 10CO2 + 8H2O + Mn2+
1.) A 0.1278-g sample of primary standard Na2C2O4 required exactly 60.04 mL of permanganate solution to reach the end point. What is the molarity of the KMnO4 reagent? 2.) A 50.00 mL sample containing La3+ was added with sodium oxalate to precipitate La2(C2O4)3, which was washed, dissolved in dilute H2SO4, and titrated with 18.09 mL of the standard KMnO4 solution (in #1). Calculate the molarity of La3+ in the unknown sample.
A 5.00 mL tap water sample was measured out with a volumetric pipette, and added to a 25 mL Erlenmeyer flask. It was then titrated with a 0.0100 M Na2EDTA.2H2O solution, and found to take 0.635 mL of the EDTA solution to reach the blue endpoint.
The Kjedahl procedure was used to analyze 256 µL of a solution containing 37.9 mg protein/mL. The liberated NH3 was collected in 5.00 mL of 0.033 6 M HCl, and the remaining acid required 6.34 mL of 0.010 M NaOH for complete titration. What is the weight percent of nitrogen in the protein? wt%
Standard solution : 0.201 grams of acetylsalicylic acid was combined with 10 mL of 0.5 M NaOH, then transfered to a 100 mL flask and filled the rest of the way with water Then 0.500 mLs of the standard solution was transfered to a 10.00 mL flask and diluted to the 10 mL mark with 0.02 M of buffered iron chloride. This step was repeated using 0.400, 0.300, 0.200, 0.100 mLs of the standard solution Questions: A.) determine the concentration of the acetylsalicylic acid in the 100.00 mL volumetric flask containing the solution from which the standards were made. B.)determine the concentration of the acetylsalicylic acid in each of the 10.00 mL calibration solutions. I only need the work for 0.400 mLs C.)Make a scatter plot (on the computer again) of absorbance versus concentration for the calibration samples. On the plot, add a linear trendline, and display the equation and the R2 value on the chart. Take your time to label the axes
Following the monograph procedure, a 724-mg of aspirin (MW=180 g/mol) dissolved in 18.5 ml of cold neutralized alcohol. This solution was then initially titrated with 0.101 N sodium hydroxide solution, then later neutralized with 0.104 sulfuric acid. What is the percentage purity of the sample? 1. What is the milliequivalent weight consumed by the acidic titrant? a. 1.5392 g-meq b. 2.0907 g-meq c. 1.4948 g-meq d. 2.1528 g-meq 2. What is the milliequivalent weight consumed by the basic titrant? a. 5.8656 g-meq b. 1.5392 g-meq c. 5.6964 g-meq d. 1.4948 g-meq 3. What is the difference of milliequivalent weight consumed in the reaction? a. -4.1572 g-meq b. 4.3708 g-meq c. 0.5515 g-meq d. 4.1572 g-meq
Accurately weigh out about 6g copper(ii) sulfate crystals into a weighing boat. Use the copper(ii) sulfate crystals to make up 250cm3 of standardized copper (ii) sulfate solution Pipette 25cm3 of this solution into a conical flask Add 1.5g potassium iodide and swirl thoroughly Titrate this solution with standard 0.1 moldm-3 Na2S2O3 in a burette. When the iodine color fades, add 1 cm3 starch indicator. Use your titration data below to calculate the percentage by mass of copper in the copper(ii) sulfate crystals.
A 2.054 g of macrogol monostearate (average molecular weight 706. 5) was added to a 200 ml flask and 25 ml of an ethanolic solution of potassium hydroxide (molecular weight 56.1, ca 0.5 M) was added. The sample was heated under a reflux condenser for 1 hour. The excess of alkali was then titrated with 0.5016 M hydrochloric acid using phenolphthalein solution as an indicator. The operation was repeated without the macrogol monostearate. Results Volume of HCI required to titrate the excess alkali = 18.35 ml Volume of HCI required to titrate the blank = 24.03 ml Calculate the saponification value for the macrogol stearate. Answer: Blank mg/g
A solid containing tris was dissolved in water and brought to a total volume of 50.00 ml. A 10.00 ml aliquot of the solution was titrated with 0.09978 M HCl to a bromcresol green endpoint. The aliquot consumed 38.93 ml of titrant. Calculate the weight of tris in the original sample.
A piece of Gold weighing 12,359 Kg is suspected of being contaminated with Iron. To perform an instrumental analysis and To confirm whether or not it contains Fe, a portion of the sample (0.954 g) is taken from the piece and dissolved with 25 mL of aqua regia. Heats up For its complete dissolution, it is cooled and made up to 100 mL. A 10 mL aliquot is taken from this solution and made up to 50 mL. From This last solution is given the appropriate treatment to visualize Fe+2, for which the 1,10-phenanthroline reagent is added. (it forms a complex that is red in color) and is taken to a visible spectrophotometer and with a 12 mm cell a absorbance of 0.45. Previously, a calibration curve of Fe+2 was obtained under the same instrumental conditions obtaining the following data: (view table) Calculate the purity of the gold piece, assuming impurities only due to Fe.