Beam ABCDE as in Figure Q1 is pin connected at A and roller supported at E. (a) Sketch the free body diagram for the beam and determine the unknown reactions. (b) Develop the shear force (V) and bending moment (M) as function of x for section CD, taking point A as the origin. (c) Sketch the shear force and free body diagrams of the entire beam and indicate all important points on the diagrams.

Beam ABCDE as in Figure Q1 is pin connected at A and roller supported at E. (a) Sketch the free body diagram for the beam and determine the unknown reactions. (b) Develop the shear force (V) and bending moment (M) as function of x for section CD, taking point A as the origin. (c) Sketch the shear force and free body diagrams of the entire beam and indicate all important points on the diagrams.

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter10: Statically Indeterminate Beams

Section: Chapter Questions

Problem 10.3.13P: A counterclockwise moment M0acts at the midpoint of a fixed-end beam ACB of length L (see figure)....

See similar textbooks

Similar questions

-4-4 A cantilever beam is supported at B by cable BC. The beam carries a uniform load q = 200 N/M. If the length of the beam is L = 3 m, find the force in the cable and the reactions at A. Ignore the axial flexibility of the cable.
A counterclockwise moment M0acts at the midpoint of a fixed-end beam ACB of length L (see figure). Beginning with the second-order differential equation of the deflection curve (the bendingmoment equation), determine all reactions of the beam and obtain the equation of the deflection curve for the left-hand half of the beam. Then construct the shear-force and bending-moment diagrams for the entire beam, labeling all critical ordinales. Also, draw the deflection curve for the entire beam.
A cantilever beam model is often used to represent micro-clectrical-mechanical systems (MEMS) (sec figure}. The cantilever beam is made of polysilicon (E = 150 GPa) and is subjected to an electrostatic moment M applied at the end of the cantilever beam. 1 f dimensions arc h — 2 [im, h — 4 ^m, and L = 520 ^mt find expressions for the tip deflection and rotation of the cantilever beam in terms of moment M.
Obtain a formula for the ratio c/maxof the deflection at the midpoint to the maximum deflection for a simple beam supporting a concentrated load P (see figure). From the formula, plot a graph of c/max versus the ratio a/L that defines the position of the load (0.5 < a/L < ) What conclusion do you draw from the graph? (Use the formulas of Example 9-3.)
Prestressed concrete beams are sometimes manufactured in the following manner. High-strength steel wires are stretched by a jacking mechanism that applies a force Q, as represented schematically in part a of the figure. Concrete is then poured around the wires to form a beam, as shown in the figure part b. After the concrete sets properly, the jacks are released, and the force Q is removed (see part c of the figure). Thus, the beam is left in a prestressed condition with the wires in tension and the concrete in compression. Assume that the prestressing force Q produces in the steel wires an initial stress a0= 620 MPa. If the module of elasticity of the steel and concrete are in the ratio 12:1 and the cross-sectional areas are in the ratio 1:50. what are the final stresses a5and a5 in the two materials?
TEXT: A five (5) metre long beam is stored in A, B and C, as indicated on the sketch. The beam has ajoints in point D. The beam has an outer downward directed evenly distributed load q=4kN/m and a concentratedhorizontal load N=20kN , as indicated on the sketch. a) Calculate the bearing reactions of the beam for the external given load effect.b) Calculate the joint force in the joint D.
A propped cantilever beam is loaded by a bending moment of the magnitude ?_? at the point B as shown in Figure Q1. The cross-section of the beam is a rectangle of the width ? and the hight ℎ that are constant along the length of the beam ?. The beam material’s Young’s modulus is ?. Assuming the positive deflections and positive vertical reaction forces are upward, calculate the value of the reaction forces at points A and B the absolute value of the reaction bending moment at point A A) Let ? represent the reaction force at Support B. By releasing the beam at Support B and imposing a force ? at Point B, the deflection of the beam consists of two parts,i.e. Part I- the deflection caused by ?_? ; Part II- the deflection caused by ? Please treat R, w, h , L , E as variables in this step , the mathematical equation for the deflection at Point B caused by ? ( Part II) can be written as: b) Using the provided data: cross-section width w = 14 mm, cross-section hight h = 82…
Problem 2: For the beam shown in Figure 2. A. Find the reaction at support B (RB) B. Find the reaction at support B (MB) C. Draw the shear force diagram D. Draw the bending moment diagram
The bending stiffness of the beam given in the figure is constant and EI is given. a) Draw the elastic curve of the beam by defining the elastic curve. b) Integration, initial values, using at least two of the Mohr and cantilever beam methods. obtaining the elastic curve equation. Compare the results, explain your comparisons. c) Calculate the rotation at one point and the collapse value at z = L.
Determine all reactions and draw the shear andmoment diagrams for beam BC in Figure P9.43. Assumemember AB has 2EI while BC has EI.
Figure 2 below shows a 12 m length of beam with a pinned support at A and rollersupport at C. The beam carries a uniformly distributed load (UDL) of 4 kN/m and aconcentrated load of 12 kN at B.a. Show the Free Body Diagram (FBD) of the beam then determine the reactionforce.b. Calculate the shear force, V. Draw Shear Force Diagram (SFD).c. Calculate the bending moment, M. Draw the Bending Moment Diagram (BMD).
A cantilever beam with a length of 5 meters and a circular cross-section of diameter 200 mm carriestwo concentrated loads of P1 = 10 kN and P2 = 100 kN at its free end as shown in Figure Q2. Bothloads act through the centroid of the beams cross-section.(i) Determine the maximum bending moment acting on the beam (ii) Develop for the beam, the expressions for the maximum tensile and compressive stressesthrough its depth (iii) Draw a schematic of the maximum stresse distribution through the depth of the beam and fromit and using equations, determine the distance of the neutral axis from the top and bottomsurfaces of the beam