c. Figure 2.1 shows a rectangular plate 0.6 m wide and 1.2 m deep lying within a water body such that its plane is inclined at 45° to the horizontal and the top edge is 0.70 m below the water surface. Determine the total pressure force on one side of the plate and location of the centre of pressure. 45° 0.7 m 0.6 m - 0.6 m- 1.2 m +.

c. Figure 2.1 shows a rectangular plate 0.6 m wide and 1.2 m deep lying within a water body such that its plane is inclined at 45° to the horizontal and the top edge is 0.70 m below the water surface. Determine the total pressure force on one side of the plate and location of the centre of pressure. 45° 0.7 m 0.6 m - 0.6 m- 1.2 m +.

Name: c. Figure 2.1 shows a rectangular plate 0.6 m wide and 1.2 m deep lyi
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: c. Figure 2.1 shows a rectangular plate 0.6 m wide and 1.2 m deep lying within a water body suchthat its plane is inclined at 45° to the horizontal and the top edge is 0.70 m below the watersurface. Determine the total pressure force on one side of

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter8: Centroids And Distributed Loads

Section: Chapter Questions

Problem 8.121P: One side of the container has a 03-m square door that is hinged at its top edge. If the container is...

See similar textbooks

Similar questions

16. A semi-circular plate whose radius is 3.6 m and its bottom diameter is 5.6 m from the water surface. What it’s the hydrostatic force acting on the plate?685.3 kN758.9 kN704.5 kN813.2 kN
A rectangular car is 3 m. long by 1.5 m wide and 1.5 m deep. If friction is neglected and the car rolls down a plane with an inclination of 20 degrees, what is the inclination of the water surface if the car contained 0.60 m depth of water when the car was horizontal?
End D of a 2.5 long uniformly plain wooden rod( s.g=0.7) is held 0.3m below the surface of still water. (a.) How much of the rod remains above the water surface? (b.) if the rod diameter is 25mm what force of D is required to hold it in place ?
A closed cylindrical vessel, 2m in diameter & 4m high is fully filled with water & rotated to its vertical axis at a constant speed of 12.2 rad/sec. The top is pressurized by 180 KPa. (a) What is the pressure at the center bottom of the cylinder? (b) What is the pressure at the circumference bottom of the cylinder? (c) What is the total hydrostatic force at the sides of the cylinder?
15- What will be the diameter (in mm) of a water droplet, the pressure inside which is 0.00221 N/cm2 greater than the outside pressure? (Take surface tension as 0.075 N/m)
Hydrostatic: A 2-m-wide, 3-m-high vertical rectangular gate has its top edge 2 m below the water level. It is hinged along its lower edge. What force, acting on the top edge, is necessary to hold the gate shut?
A semicircular gate with a diameter of 6 ft is installed at 50º as shown below. The top of the gate is 5 ft below the water surface. Determine the resulting hydrostatic force and the location of the center of pressure on the gate.
Three types of fluids stack in an open tank as shown in the picture. If the specific gravidties are sg1=1.00, sg2=2.00, sg3=3.00, and h1=1.00 m, h2=1.00 m, h3=1.00 m, calculate the gage pressure at location 4, P4(gage)=_________(kPa)
A car plunges into a lake during an accident and lands at the bottom of the lake on its wheels. The door is 1.2 m height and 1m wide and the edge of the door is 8 m below the free surface of the water. Determine the hydrostatic force on the door and the location of the pressure centre and discuss whether the driver can open the door.
Derive the expression for the hydrostatic force on a vertical plane surface?
1. If the pressure 4 m below the free surface is 150 kPa, calculate its specific weight and specific gravity. fluid mechanics
What is the absolute pressure inside a water drop having radius 1mm and surface tension as 0.1 N/m? Assume atmospheric pressure as 1 bar.