Calculate the dynamic viscosity of an oil, which is used for lubrication between square plate of size 700 mm x 700 mm and inclined plane with an angle of inclination 45° as shown in Fig. below. The weight of the square plate is 250 N and it slides down the inclined plane with a uniform velocity of 0.35 m/s. The thickness of oil film is 1.4 mm. Liquid film of thickness h 250 sin 25 u = 0.35 m- 250 cos 25 - Block contact W-250N area A

Calculate the dynamic viscosity of an oil, which is used for lubrication between square plate of size 700 mm x 700 mm and inclined plane with an angle of inclination 45° as shown in Fig. below. The weight of the square plate is 250 N and it slides down the inclined plane with a uniform velocity of 0.35 m/s. The thickness of oil film is 1.4 mm. Liquid film of thickness h 250 sin 25 u = 0.35 m- 250 cos 25 - Block contact W-250N area A

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A shaft 70-mm in diameter is being pushed at a speed of 400mm/s through a bearing sleeve 70.2-mm in diameter and 250mm long. The clearance is filled with oil with a kinematic viscosity of v = 0.005 m²/s and SG-0.9. A. Find the frictional resistance exerted by the oil on the shaft in Newtons (N). B. If the shaft in the problem above is fixed axially and rotated inside the sleeve at 2000 rpm, determine the resisting torque exerted by the oil and the power required to rotate the shaft in kilowatts (kW).
steel tape 0.5 mm thick and 20 mm wide is pulled by a force F through a slit opening 1.5 mm and length 15 mm. Considering that the tape is centered on the slit, that lubricating oil of viscosity µ = 0.4 Nm-2s? fills the gap spaces not occupied by the tape and that the maximum tape speed is 10 m/s, calculate the maximum force F. Expected Answer: Maximum Force = 4.8N
a square bar 100 mm on a side is inserted concentrically into a sleeve that is 1.2 mm greater in dimension than that of the bar. The gap between them is coated with oil. The sleeve is 250 mm long. A constant pushing force of 6 N causes the bar to move at a uniform rate of 0.4 m/s. Determine the viscosity of the oil.
A flat metal block of mass 1.50 slug slides down a 25° incline. An oil film 0.006 in. thick and with a viscosity of 0.002 slug/ps extends between the block and the plane. The oil and the block have a contact surface of 1.0 p2. Calculate the terminal velocity of the block in p/s.
Anoilring bearing of transmission shaft of 50 mm diameter in which journal rotates at 1450 rpm, radial clearance and bearing pressure are 20 µ and 4 N/mm². If Sommerfeld number is 0.0637, the viscosity of lubricant is
An oil film of thickness 1.5 mm is used for lubrication between asquare plate of size 0.9 m × 0.9 m and an inclined plane having anangle of inclination 200. The weight of the square plate is 392.4 N andit slides down the plane with a uniform velocity of 0.2 m/s. Find thedynamic viscosity of the oil
A shaft has a diameter of 0.08 m that is pulled at .5 m/s in a bearing sleeve .0803 m in diameter having a length of 36 m. A free space is filled with oil at 20oC with kinematic viscosity of 50 cm2 /s and SG = 0.9. Calculate the force exerted by the oil in the shaft
Calculate the pressure drop of starfruit juice drink that flows with a velocity of 1.5 m/sthrough 1.2 m of horizontal sanitary stainless steel tubing with 9 mm inner diameter. Thedensity and viscosity of starfruit juice drink are 2300 kg m -3 and 0.8 x 10 -3 kg m -1 s -1 ,respectively. Calculate the energy losses due to the friction. Use the Moody diagram tosolve this problem.
A shaft 70-mm in diameter is being pushed at a speed of 400mm/s through a bearing sleeve 70.2-mm in diameter and 250mm long. The clearance is filled with oil with a kinematic viscosity of v = 0.005 ?2/? and SG=0.9. Find the frictional resistance exerted by the oil on the shaft in Newtons (N). And when the shaft is fixed axially and rotated inside the sleeve at 2000 rpm, determine the resisting torque exerted by the oil and the power required to rotate the shaft in kiloWatts (kW).
A shaft 70.0 mm in diameter is being pushed at a speed of 400 mm/s through a bearing sleeve 70.2 mm in diameter and 250 mm long. The clearance, assumed uniform, is filled with oil at 20 deg C with kinematic viscosity of 0.005 m^2/s and specific gravity 0.9. If the shaft is fixed axially and rotated inside the sleeve at 2000 rpm, determine the power required to rotate the shaft.
Calculate the dynamic and kinematic viscosity of water at 53.85°C
A 40kgf body slides on an inclined plane of 30° with the horizontal, which is lubricated with a film of a fluid with viscosity (μ) and thickness “y”. It slides with a constant speed of 1.0 m/s. Determine the viscosity of the fluid in cPoise if the thickness is 91.8μm. The relative density is 0.75