Answered: 8.Capillary rise in the glass tube used…

Name: 8.Capillary rise in the glass tube used for measuring water level is
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: 8.Capillary rise in the glass tube used for measuring water level is notto exceed 0.5 mm. Determine its minimum size, given that surfacetension for water in contact with air = 0.07112 N/m.38

Engineering

Mechanical Engineering

8.Capillary rise in the glass tube used for measuring water level is not to exceed 0.5 mm. Determine its minimum size, given that surface tension for water in contact with air = 0.07112 N/m. 38

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter8: Centroids And Distributed Loads

Section: Chapter Questions

Problem 8.121P: One side of the container has a 03-m square door that is hinged at its top edge. If the container is...

See similar textbooks

Similar questions

The 12-ft wide quarter-circular gate AB is hinged at A. Determine the contact force between the gate and the smooth surface at B due to water pressure acting on the gate. Use =62.4lb/ft3 for water.
A 6-in. diameter hole is drilled in the conical frustum. Calculate the volume and the surface area of the resulting body.
Capillary rise in the glass tube used for measuring water level isnot to exceed 0.5 mm. Determine its minimum size, given thatsurface tension for water in contact with air = 0.07112 N/m.
Determine the total pressure and depth of centre of pressure on a plane rectangular surface of 1 m wide and 3 m deep when its upper edge is horizontal and (a) coincides with water surface (b) 2 m below the free water surface.
Q1 Determine the minimum size of glass tubing that can be used to measure water level, if the capillary rise in the tube is not to exceed 0.3 mm. Take surface tension of water in contact with air as 0.0735 N/m. A U-tube is made up of two capillaries of bores 1.2 m and 2.4 mm respectively. Q2) The tube is held vertical and partially filled liquid of surface tension 0.06 N/m and zero contact angle. If the estimated difference in the level of two menisci is 15 mm, determine the density the liquid. Q10) In measuring the unit energy of a mineral oil (specific gravity = 0.85) by the bubble method, a tube having an internal diameter of 1.5 mm is immersed to depth of 12.5 mm in oil. Air is forced through the tube forming a bubble at the lower end. What magnitude of the unit surface energy will be indicated by a maximum bubble pressure intensity of 150 N/m.
A open tank 5 m, long, 2 m deep and 3 m wide contains oil of relative density. 0.9 depth of 0.9 m if the tank is accelerated along its length on a horizontal track at a constant value of 3 m/second, square determine the new position of oil surface.
The gage pressure of the air in the tank shown is measured to be 50 kPa. Determine the differential height h of the mercury column
Determine the pressure at a point 10 m below the free surface in a fluid that has a variable density in kilograms per cubic meter given the density equal to 450+ ah, in which a = 12kg/m^4 and h is the distance in meter measured from the free surface.
Calculate the absolute pressure in kPa at a depth of 11 m below the oil's free surface, with a barometric reading of 752 mm Hg.
A 15-ft-long, 6-ft-high rectangular tank open to the atmosphere is towed by a truck on a level road. The tank is filled with water to a depth of 5 ft. Determine the maximum acceleration or deceleration allowed if no water is to spill during towing.
What force, F, must be applied to the S-shaped gate to keep it closed? The gate is 1 m wide andthe radius of curvature of each part is 1 m. The liquid is water.
A 0.018-in-diameter glass tube is inserted into mercury, which makes a contact angle of 140° with glass. Determine the capillary drop of mercury in the tube at 68°F.