Chloride in a brine solution is determined by the Volhard method. A 10.00 mL aliquot of the solution is treated with 15.00 mL standard 0.1182 M AGNO3 solution. The excess silver is titrated with standard 0.1010 M KCNS solution, requiring 2.38 mL to reach the endpoint. Calculate the concentration of chloride in g NaCl/liter.

Chloride in a brine solution is determined by the Volhard method. A 10.00 mL aliquot of the solution is treated with 15.00 mL standard 0.1182 M AGNO3 solution. The excess silver is titrated with standard 0.1010 M KCNS solution, requiring 2.38 mL to reach the endpoint. Calculate the concentration of chloride in g NaCl/liter.

Fundamentals Of Analytical Chemistry

9th Edition

ISBN:9781285640686

Author:Skoog

Publisher:Skoog

Chapter13: Titrations In Analytical Chemistry

Section: Chapter Questions

Problem 13.12QAP

See similar textbooks

Similar questions

In one trial determination of the concentration of NaOCl in the diluted bleach sample, 10.00 mL of the diluted bleach solution required 23.32 mL of 0.0195 M Na2S2O3 titrant to reach the endpoint. What is the molar concentration of NaOCl in the diluted bleach solution?
a 10g soil sample was gently stirred with 250 ml of 1.0 M CH3COO(NH4) solution for 24 h and centrifuged to separate the solution. The solution recovered after centrifugation was titrated with distilled water to a volume of 1 liter and analyzed for cations. Analytical results showed that the solution contained 20 mg/L Ca, 2 mg/L Mg, 1 mg/L K, and 0.5 mg/L Na. Calculate the number of cation exchange equivalents and express it in meq/100 g of soil
To determine the fluoride content in an aqueous and chloride-containing preparation of ammonium fluoride, the following analysis was performed. 105.2 mg of the preparation was dissolved in 100.0 mL of water. Then a 300 mL 40 mM lead chloride solution was added, whereby all fluoride ions were precipitated out of the solution in the form of the sparingly soluble salt PbClF (s). The precipitate was separated and washed at 15 degrees with a lead fluoride chloride saturated solution and dried at 130 degrees. The precipitate weighed 651.3 mg. a) Calculate the fluoride content (as % by weight F) in the preparation.b) Determine the purity of the ammonium fluoride preparation
The salt content was extracted from a 12.0000 g junk food sample. The extract was diluted to 100.00 mL. From this solution, 15.00 mL was taken and required 23.75 mL of a 0.08943 M AgNO3 solution to reach the endpoint. What is the percentage by mass of salt as NaCl (58.45 g/mol) in the junk food sample?
In a lab, you diluted a sample of bleach to 1/10 concentration in a 250 vol. flask. Then quantitatively transferred into into a beaker and titrated it with a standard sodium thiosulfate solution with a molarity of 0.1215M. You repeated this 3 times. The data below is the amount of sodium thiosulfate that was titrated in the 3 runs. Calculate the molarity in each run of the diluted bleach and the concentration of undiluted bleach sample.
The solubility of borax, which is made up of sodium tetraborate (Na2B4O5(OH)4 8H2O), was analyzed. The dissolution of borax is: Na2B4O5(OH)4 • 8H2O(s) ⇌ 2 Na+(aq) + B4O5(OH)42–(aq) + 8 H2O(l) A 50 mL saturated solution was prepared. After filtration of solution, 5 mL aliquot was transferred to a flask and titrated using 0.432 M HCl. The endpoint was found to be 4.73 mL of the titrant. Tetraborate anion (B4O5(OH)42-) is a weak base which reacts with HCl like the following reaction: B4O5(OH)42–(aq) + 2 H+(aq) + 3 H2O(l) ⇌ 4 H3BO3(aq) What is Ksp expression for the dissolution? What is the tetraborate ions concentration in the filtrate? What is the molar solubility and Ksp of borax if the titration was done at room temperature (298 K)?
Consider the reaction of Potassium Phosphate and Nickel (II) Bromide, where 15.00 ml of 0.7000M K3PO4 is mixed with 15.00ml of 0.2000M NiBr2 (and the final volume is 30.00 ml, that is there is no change in volume upon mixing). Your answer has to include all of the following: What is the limiting reagent? What is the identity and mass of precipitate formed? What is the concentration of the alkali metal that is a spectator ion? What is the concentration of the excess phosphate?
A sample containing calcium was analyzed by gravimetry, converting all calcium to calcium oxalate monohydrate (CaC2O4 • H2O). The sample weighing 0.2654 g was dissolved by adding 6M HCl, and then ammonium oxalate solution was added to precipitate all the calcium. The precipitate was suction filtered and dried in an oven at 95 °C for one hour. The solid obtained weighed 0.3216 grams.Calculate:A) The percentage of CaCO3B) The percentage of Ca C) The percentage of CaO
A 600.0 mg sample consisting of only CaC2O4and Mg C2O4is heated at 500oC converting the two salts to CaCO3and MgCO3. The sample weighs 465.0 mg. If the sample had been heated at 900oC where the products are CaO and MgO, what would the mixture of oxides weigh? Show the clear and complete solution
A series of iron standard solutions need to be made from a 40 ppm iron stock solution provided. For the first dilution, pipet 5.00 mL of the 40 ppm stock solution into a 100.00 mL volumetric flask and dilute to mark. What is the new concentration of the diluted solution?
SO4 -two content in 7689mL of a water sample was precipitated as Na2SO4. The precipitated was filtered, washed and calcined in an empty crucible with a mass of 27.0234g. The mass of the crucible plus Na2SO4 (142g/mol) was 27.7708g. Calculate the %m/v of Na (23g/mol) and the concentration of Na in the sample in ppm.
describe how you can prepare 500mL of 0.10 M Fe2O3 (159.69g/mol) from the primary-standard-grade solid.