) Consider a double - fluid manometer attached to an air pipe shown in Figure. If the specific gravity of one fluid is 13.55, determine the specific gravity of the other fluid for the indicated absolute pressure of air. Take the atmospheric pressure to be 100 kPa. ( Consider a double-fluid manometer attached to an air pipe sho wn in Figure. Ifthe specific gravity of one fluid is 13.55, determine the specific gravity of the otherfluid for the indicated absolute pressure of air. Take the atmospheric pressure to be100 kPa.AirP= 76 kPa40 cmSG222 cmSG = 13.55

Specific gravity is defined as the ratio of the density of the substance to the density of the…

Consider a double-fluid manometer attached to an air pipe shown in Figure. If the specific gravity of one fluid is 13.55, determine the specific gravity of the other fluid for the indicated absolute pressure of air. Take the atmospheric pressure to be 100 kPa. Air P= 76 kPa 40 cm SG2 22 cm SG, = 13.55 %3D

Consider a double-fluid manometer attached to an air pipe shown in Figure. If the specific gravity of one fluid is 13.55, determine the specific gravity of the other fluid for the indicated absolute pressure of air. Take the atmospheric pressure to be 100 kPa. Air P= 76 kPa 40 cm SG2 22 cm SG, = 13.55 %3D

Engineering Fundamentals: An Introduction to Engineering (MindTap Course List)

5th Edition

ISBN:9781305084766

Author:Saeed Moaveni

Publisher:Saeed Moaveni

Chapter10: Force And Force-related Variables In Engineering

Section: Chapter Questions

Problem 3P: An astronaut has a mass of 68 kg. What is the weight of the astronaut on Earth at sea level? What...

See similar textbooks

Similar questions

Using the information given in Table 10.4, determine the ratio of local pressure and density to sea-level values. Estimate the value of air density at the cruising altitude of most commercial airliners. Altitude (m) sealevel PPsealevel 0 (sea level) 1000 3000 5000 8000 10,000 12,000 14,000 15,000
An astronaut has a mass of 68 kg. What is the weight of the astronaut on Earth at sea level? What are the mass and the weight of the astronaut on the Moon, and on Mars? What is the ratio of the pressure exerted by the astronauts shoe on Earth to Mars?
In figure 6, compute the pressure difference between m and n, in pounds per square inch, when: (a) Fluid A is brine (sp gr 1.15), the gage fluid is oil (sp gr 0.92), and z = 45.15 in. (b) Fluid A is water, the gage fluid is air, and z = 15.15 in.
Figure 1 shows a tank containing water. One side of the tank is open to the atmosphere and theother side is sealed with air above the water.a. Calculate the pressures (gage) at Points A, B, C, D, E and F.b. What is the air pressure in the right side of the tank?
A hemisphere of radius 12 inches and base up is full of water that runs out through an orifice of area 1 in2 in the bottom of the tank. How long will it take the water to run out? Assume orifice coefficient is 1.0
The differential manometer shown in figure 4 is used to measure pressure difference between pipe A and B. Pipe A is conveying water while pipe B is conveying air. If the pressure at B is 12kPa calculate the pressure at A. Figure 4. (a) 35kPa (b) 12kPa (c) 23kPa (d) 24kPa
Calculate the capillary effect in millimeters in a glass tube of 4mm diameter, when immersed in Water Mercury the temperature of the liquid is 200C in contact with air are 0.073575 N/m and 0.51 N/m respectively. The angle of contact for water is zero and that for mercury is 1300. Take density of water at 200C as equal to 998 kg/m3. Explain the ways of describing the fluid motion
As shown in the figure, determine the gage pressure on the bottom of the tank in kPa. Considering the total gage pressure at the bottom of the tank what will be the absolute pressure if the barometric pressure if 725 torr?
Fluid Mechanics: (a) Convert a pressure head of 4.60 m of water to meters of oil, s.g. 0.750. (b) Convert a pressure head of 24 in of mercury to feet of oil, s.g. 0.750.
In figure, pressure gage A reads 10.8 psi, while pressure gage B reads 11.7 psi. Findthe velocity if air at 50 ◦F is flowing. Atmospheric pressure is 26.9 inHg. AssumeC1=1.0 and neglect compressibility effects.
Convert the following pressure readings from millimeters of mercury to pascal:a. 28.5 mm Hgb. 30.5 mm Hg
Given below are pipe lengths, sizes, and connections. All pipes have a friction factor of 0.020. If the flow from A to B is 8 cfs, Determine the head loss in feet in PIPE 5. *23.8062*9.0254*1.0666*2.6570 Determine the flow in the upper branch pipe Q2 in cubic feet per second. *2.6667*2.3809*4.8840*12.4747 Determine the head loss in feet in PIPE 2. *3.4373*8.0165*9.2849*10.4720 Determine the total head loss in feet between the inlet A and the outlet D. *9.2849*13.1625*17.3474*35.9163