Consider the bend shown in . The total mass of the bend and the water within it is 20 kg, with a mass center at point G. The pressure of the water at A is 50 kPa Assume that no force is transferred to the flanges at A and B. Suppose the velocity through the pipe to be 4.5 m/s. 100 mm 60 100 mm 600 mm 150 mm- -100 mm Part A Determine the horizontal component of force exerted on the fixed support D.

Consider the bend shown in . The total mass of the bend and the water within it is 20 kg, with a mass center at point G. The pressure of the water at A is 50 kPa Assume that no force is transferred to the flanges at A and B. Suppose the velocity through the pipe to be 4.5 m/s. 100 mm 60 100 mm 600 mm 150 mm- -100 mm Part A Determine the horizontal component of force exerted on the fixed support D.

Name: Consider the bend shown in . The total mass of the bend and thewater
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: Consider the bend shown in . The total mass of the bend and thewater within it is 20 kg, with a mass center at point G. Thepressure of the water at A is 50 kPa Assume that no force istransferred to the flanges at A and B. Suppose the velocitythrough

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A cylindrical vessel 3m high and 1.50 m diameter is filled with water to a depth of 2.50m. In its side is a 50mm circular orifice C=0.60 placed 30 cm above the bottom of the vessel. If the vessel be rotated about its own axis at 60 rpm and the water is allowed to escape through the orifice for a period of 3 minutes, compute thea. Difference in elevation of the water surface at the center and at the periphery of the tank at this instant.b. Volume of water dischargedc. How deep will the water stand in the vessel if brought to rest?
In an experiment a jet of water of diameter 20 mm is fired vertically upwards at a sprung target thatdeflects the water at an angle of 120° to the horizontal in all directions. If a 500g mass placed on thetarget balances the force of the jet, what is the discharge of the jet in litre/s?
A hemispherical tank of diameter 4 m contains water up to a height of 2.0 m. An orifice of diameter 50 mm is provided at the bottom. Find the time required by water (i) to fall from 2.0 m to 1.0 m (ii) for completely emptying the tank. Take Cd= 0.6
A horizontal nozzle discharges water into the atmosphere as shown in the figure. the relative pressure at point 1 equal to ?1 = 18 ??? . A. A Pitot tube connected to a mercury manometer is inserted into the flow. in the area section A1 indicating a height difference ℎ = 0.01 m. For this reading indicated in the Pitot tube, determine the velocity in the A1 area section of the nozzle. B. For the dimensioning of the anchor block it is necessary to determine the force that the nozzle applies over the fluid. Calculate the component of this force in the x direction. Data: ?1 = 0.070 ?; ?2 = 0.060 ?; ? = 30°; ??? = 13.6
A rocket motor is fired in place on a test stand. The rocket exhausts 10 kg/s at an velocity of 800 m/s. Assume uniform steady conditions at the exit plane with an exit plane static pressure of 50 kPa. For an ambient pressure of 101 kPa, determine the rocket motor thrust transmitted to the test stand
A reducing bend with an inlet diameter of 200 mm and exit diameter of 150 mm bends 40 degreesupwards. The water velocity and corresponding pressure at the inlet to the band is 4, 5 m/s and 70 kParespectively. Determine the weight flow, the water flow velocity at the exit to the bend, the bend exitpressure if the friction head loss through the bend section is 2 m and the magnitude and direction ofthe resultant force flowing through the bend.
A cylindrical tank discharges water at 20^O C through a well-rounded orifice to hit an inclined plate as shown in the figure. Determine the components of the force exerted by the fluid jet on the plate inclined at 60^O from the horizontal.( Assume the external and internal pressures are the same)
A vertical cylindrical container contains 5840 gallons of gasoline and is 1.53 m in radius. Due to evaporation within the tank, the pressure on the top of the fluid is 2.5 times normal atmospheric pressure. The density of gasoline is 737 kg/m3. a. What is the pressure at the bottom of the tank? b. If a nozzle at the bottom of the tank is used to let fuel out, with what velocity would the gasoline exit the hole? c. If a nozzle at the bottom of the tank is used to let fuel out, what volume flow rate will result if the diameter of the hole is 1.2 cm? d. At what initial rate will the height of the fuel level in the tank drop as fuel is removed?
An elbow deflects water upward and discharges it to the atmosphere at a specific rate. Determine the gage pressure at the inlet of the elbow and the anchoring force needed to hold the elbow in place. (gage pressure at the outlet is zero)
The jet engine on a test stand, shown in the figure, admitsair at 20oC and 1 atm at section 1, where the area is 0.5 m2and the velocity is 250 m/s. The fuel-to-air ratio is 1:30.The air leaves at section 2 at atmospheric pressure and ahigher temperature. The exit velocity is 900 m/s and thearea is 0.4 m2. Compute the horizontal test stand reactionRx needed to hold the engine fixed.
A pipe whose axis is horizontal, is full of water in motion. At a section A, the velocity of water is recorded as 54000dm/hrandd the pressure is equilavent tp 14.07m of water. if the pipe tapers gradually from 150mm diameter to A to 100mm diameter at B. determine the preesure at B.
A liquid of density ρ fl ows through a 90 ° bend as shown inFig. and issues vertically from a uniformly poroussection of length L . Neglecting pipe and liquid weight,derive an expression for the torque M at point 0 required tohold the pipe stationary.