Water flows steadily and frictionless from the large open tankthrough the 3-in diameter pipe, and discharges to the atmosphere.At a point A there is a narrow section in the pipe. Section AB of thepipe is at an angle B = 45° and section C is inclined at an angle 0 =70°. Height h = 16 ft. Find the Resultant force [lb] on the bend ABC ifthe gauge pressures at A and B have the same reading.В9 ft3-in. diameter8 ftAhdiameter = dC

Name: Water flows steadily and frictionless from the large open tankthrough
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: Water flows steadily and frictionless from the large open tankthrough the 3-in diameter pipe, and discharges to the atmosphere.At a point A there is a narrow section in the pipe. Section AB of thepipe is at an angle B = 45° and section C is inclined

For the above FBD we have the Bernoullis equation asFor points between 1 and…

Engineering

Mechanical Engineering

Water flows steadily and frictionless from the large open tank through the 3-in diameter pipe, and discharges to the atmosphere. At a point A there is a narrow section in the pipe. Section AB of the pipe is at an angle ß = 45° and section C is inclined at an angle 0 = 70°. Height h = 16 ft. Find the Resultant force [lb] on the bend ABC if the gauge pressures at A and B have the same reading. %3D | B 9 ft 3-in. diameter 8 ft A h diameter = d

Water flows steadily and frictionless from the large open tank through the 3-in diameter pipe, and discharges to the atmosphere. At a point A there is a narrow section in the pipe. Section AB of the pipe is at an angle ß = 45° and section C is inclined at an angle 0 = 70°. Height h = 16 ft. Find the Resultant force [lb] on the bend ABC if the gauge pressures at A and B have the same reading. %3D | B 9 ft 3-in. diameter 8 ft A h diameter = d

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The figure below shows a turbine with an inlet pipe and a draft tube. If the efficiency of the turbine is only 80 percent and the discharge of the water is 1000 litres per second. Calculate: (a) the power developed by the turbine: (b) The reading of the gauge G:
Water is the fluid in the pipe as shown, and mercury is the manometer fluid. If the deflection Δh is 60 cm and L is 180 cm, what is the gage pressure at the center of the pipe in kPa? delta h is between point 1 and 2.
A horizontal water pipe is reduced in size from 18 inches in diameter from point A to 6 inches in diameter to point B. The flow in the pipe is 10 cubic feet per second, and the pressure in A is 20 psi (gage). If it is assumed that there is no less energy due to friction, what is the pressure at B
The figure below shows a gasoline storage tank with cross-sectional area Asub1, filled to a depth h. The space above the gasoline contains air at pressure psub0, and the gasoline flows out the bottom of the tank through a short pipe with cross-sectional area Asub2. Derive expressions for the flow speed in the pipe and the volume flow rate. Thank you!
Shown below is the water jet flow from a pressurized closed tank. The vertical distance between free surface and the jet nozzle is . The vertical distance between the highest point of the water jet and the jet nozzle is . The flow is steady and no energy loss is involved. The acceleration due to gravity is . The water's specific gravity is . Find the pressure at point 1________ A. -19.62 kPa (gage) B. -19.62 kPa (absolute) C. 19.62 kPa (absolute) D. 19.62 kPa (gage)
Water flowing at 1.0 ft/s in a pipe passes into a constriction where area is one-tenth the normal pipe area. What is the decrease in water pressure in the constriction? The weight density of water is 62.4 lbs/ft3.
In the figure, CO2 with a density of 1.825 kg / m flows through the pipe. If the density of P1 = 170 kPa manometer liquid is 825 kg / m ^ 3; The pressure P2 and the volumetric flow of CO2. calculate.
Water flows steadily through a horizontal 30 degree pipe bend. At the inlet point 1, the diameter is 0.3 m, the velocity is 12 m/s, and the pressure is 128 kPa gauge. At the outlet point 2, the diameter is 0.38 m and the pressure is 145 kPa gauge. Determine the forces F_x and F_y necessary to hold the pipe stationary.
At one point in a pipeline the water's speed is 3.00m/s and the gauge pressure is 5.00•10^4 Pa. Find the gauge pressure at a second point in the line, 11.0m lower than the first, if the pipe diameter at the second point is twice that at the first. note: density of water is 1000 kg/m^3.
Find the horizontal component of the velocity of the water leaving the nozzle in terms of Q. Find the vertical force acting on the block in terms of Q. Find the horizontal force acting on the block in terms of Q.
The power supplied to the fluid (QγHB/550) by the pump in the Figure is 10 hp. If H = 60 ft and the system losses are given by 8 V²/2g, determine the flow and gauge load of the HB pump. Plot the piezometric and energy lines.
The water flows to the nozzle through a 180-degree elbow. The pipe diameter D-75mm, the nozzle diameter d=25mm, and the pressure gauge at the front of the pipe reads 60kPa. Find the force of the upper, middle and lower bolts at the flange joint 1-1 position. Assuming that four bolts are installed at the up, down, front and back, the cross-center distance of the four bolts is 150mm, the weight of the elbow and the water is 100N, and the acting position is shown in the figure. Please use conservation of momentum (momentum equation) and draw the control volume since that is our lesson.