Data for the centralized air conditioner are as follows: Input air passing through evaporator coils: RH=70% Dry bulb temperature3D30°C Saturation Pressure @30°C=4.98kPa Output air that passed through evaporator coils: RH=45% Dry bulb temperature%3D23°C Saturation Pressure @24°C=3.8kPa Determine the total air conditioning load in tons of refrigeration if the air is charged at the evaporator coils at two kilograms per second.

Data for the centralized air conditioner are as follows: Input air passing through evaporator coils: RH=70% Dry bulb temperature3D30°C Saturation Pressure @30°C=4.98kPa Output air that passed through evaporator coils: RH=45% Dry bulb temperature%3D23°C Saturation Pressure @24°C=3.8kPa Determine the total air conditioning load in tons of refrigeration if the air is charged at the evaporator coils at two kilograms per second.

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter22: Condensers

Section: Chapter Questions

Problem 7RQ: When a standard-efficiency air-cooled condenser is used, the condensing refrigerant will normally be...

See similar textbooks

Similar questions

Welded ______sealed compressors are normally used in household refrigerators.
What are the approximate temperature ranges tor low-, medium-, and high-temperature refrigeration applications?
Condensers in these refrigerators are all_______cooled.
Refrigerators currently being manufactured in the United States are using______as their refrigerant.
What are higher-efficiency refrigerant blends that can be used as long-term replacements for R-22 in residential and light-commercial air-conditioning applications?
When a standard-efficiency air-cooled condenser is used, the condensing refrigerant will normally be higher in temperature than the entering air temperature.
The operating condition for the single compressor in a household refrigerator is the lowest box temperature, which is typically A. 0F B. -20F C. 20F D. 40F
Why is truck refrigeration designed to provide low- and medium-temperature refrigeration?
What is the heat output, in Btu/h, of a terminal unit with a T of 10F and a water flow rate of 5 gpm?
Define flash gas, and explain how it applies to the net refrigeration effect of the refrigeration cycle.
In a refrigerant 12 system which serves a 250 kw evaporator at -30°C. The system uses two stage compression with intercooling and removal of flash gas. The condenser temp is 40°C. h2 = 357 kJ/kg, h4 = 365 kJ/kg Compute the ff:- mass flow rate at low stage compressor (m1), answer must be in kg/s- mass flow rate at high stage compressor (m3), answer must be in kg/s- low stage compressor work, answer must be in kw
In a Refrigerant 12 system which serves a 212 kw evaporator at - 30 0C. The system uses two stage compression with intercooling and removal of flash gas. The condenser temp is 400C . Given that, h2=356kJ/kg, h4=367kJ/kg Compute the following: a.) mass flow rate at low stage compressor (m1)ANSWER: 1.53661 kg/s b.) mass flow rate at high stage compressor (m3)ANSWER: 2.11791 kg/s c.) low stage compressor workANSWER: 27.43931 kw d.) high stage compressor workANSWER: 32.63926 kw e.) total compressor workANSWER: 60.078575 kw f.) COPANSWER: 3.52871 g.) heat rejected in the condenserANSWER: 272.07857 kw