Design a footing with one side limited to 2.50 m for the following: 300 mm x 300 mm edge column, D = 578 kN, L = 689 kN, fc' = 21 MPa, fy = 413.70 MPa, qa = 192 kPa, and a distance from top of backfill to bottom of footing = 1.20 m.

Design a footing with one side limited to 2.50 m for the following: 300 mm x 300 mm edge column, D = 578 kN, L = 689 kN, fc' = 21 MPa, fy = 413.70 MPa, qa = 192 kPa, and a distance from top of backfill to bottom of footing = 1.20 m.

Principles of Foundation Engineering (MindTap Course List)

9th Edition

ISBN:9781337705028

Author:Braja M. Das, Nagaratnam Sivakugan

Publisher:Braja M. Das, Nagaratnam Sivakugan

Chapter10: Mat Foundations

Section: Chapter Questions

Problem 10.1P: Refer to the rectangular combined footing in Figure 10.1, with Q1 = 100 kip and Q2 = 150 kip. The...

See similar textbooks

Related questions

Q: 23. A hemispherical tank having a radius of 2.5 m is filled with water to a depth of 1.8 m. If a…

A: As per rule , I had done only civil engineering questions, ie. 21 and 23 solution . 21

Q: Neglecting the weight of all members, compute the maximum value of P that can be applied in the…

A: Given: Two Rigid bars AB and CD, Vertical displacement is limited to 5.5mm

Q: Answer the following and show your solutions: Problem 1 Determine the magnitude of the resultant…

Q: For a short period of time, the motor turns gear A with a constant angular acceleration of a…

Q: Answer the following and show your solutions: Problem 1 Determine the magnitude of the resultant…

A: solution As per Bartleby guidelines in multiple questions we are supposed to answer the first one

Q: Answer number 2 only 2. The soil moisture at field capacity and during irrigation is 27.2% and…

A: Given data for no. 2, Field capacity FC = 27.2% During irrigation or wilting point = PW = 19.85%…

Q: Design a 350 mm x 500 mm rectangular beam to resist a factored moment of 630 kN-m. Assume concrete…

Q: Determine the resulting moments at the supports of the continuous beam show below due to the given…

Q: Calculate the required spacing of 10-mm U stirrup in a rectangular beam with b = 280 mm and d = 440…

Q: Design a 300 mm x 500mm rectangular beam to carry a dead load moment of 80 kN-m (including its own…

Q: A simply supported 4-m long beam is made up of 80% grade Malugai. The beam is carrying a uniform…

A: Find reactions :∑ MB=0RA(4)-10(4)(2)-0.5(2)=0RA=20.25KNRB=20.25KN

Q: e at an accelerated rate of 4.5 m/s^2. Determine the cable tension if the suspended crate has a mass…

A: Total length of cable is constant :L=s1+2sB=Ca2=-a12so,

Q: 50KN 20KN/m 20KN/m 3m 3m 2m 2m

A: Draw SFD and BMD

Q: Draw the shear and moment diagram of the given beam.

Q: QL. Three resistances have the following ratings: RI- 351 5% R2- 231 3% R3- 45+5% Determine the…

Q: A 305mm wide rectangular beam has an overall depth of 560 mm. The beam is reinforced with 4-25mm φ…

Q: Method of Superposition 1. Determine the deflection and slope at point B with w = 15 KN/m and L =…

Q: The coefficients of permeability of a soil in horizontal and vertical directions are 3.46 and 1.5…

A: Reduced dimension of dam formula can be expressed as ; bB=kvkh where ; B = Length of concrete dam =…

Q: entrated load of 600 N at the midspan. The cross-sectional area of the beam is indicated below. 190…

A: Find reactions :∑ MB=0RA(4)-11(4)(2)-0.6(2)=0RA=22.3KNRB=22.3KNMAX MOMENT WILL BE UNDER THE POINT…

Q: The elastic curve and moment diagram for a beam system are shown below. Elastic curve A Moment…

Q: Draw the shear and moment diagram and determine the Vmax and Mmax of the simple beam shown below. Wo…

Q: A beam is subjected to equal bending moments of M, 3800 N-m. The cross-sectional dimensions are b=…

Q: A hydraulic jump occurs in a V-shaped channel having sides sloping at 45°. Derive an equation…

A: Hydraulic jump A hydraulic jump is a phenomenon that occurs regularly in open channel flow, such as…

Q: A simply supported beam, having the following properties: 5.5 m length, Mcr = 30 kN-m, Ig =…

Q: 3.) Consider the 2D simple-truss shown below where point A is connected via a pin, and point D is…

Q: Using Dim, solve for the following

Q: A rectangular beam with b= 270 mm and d= 510 mm is provided with 10-mm vertical U-stirrups with fy=…

A: “Since you have posted a question with multiple sub-parts, we will solve first three sub-parts for…

Q: PROBLEM 04. Structure ABD shown is supported at pt. B by a 32-mm diameter rod and at pt. A by a 30mm…

Q: Determine the resulting moments at the supports of the continuous beam shown below due to the given…

Q: What is the limiting distance for a 10" DBH tree using a prism with 10 BAF?

A: Circular girth of tree at base height is 10 inch diameter = (10/12)ft dia = (5/6)ft Dia = (5/12)ft…

Q: A storm with 150 mm precipitation produces a direct run-off 8.7 cm, with incremental hourly rainfall…

A: Given data, Total precipitation = 150 mm Run off = 87 mm To find out the phi index of the storm.

Q: gth and a concentrated load of 600 N at the midspan. The cross-sectional area of the beam is…

Q: connecte lameter bolts in each flange, as sho fFy 448 MPa, and Ae = 0.90An, compute the following.…

A: Given: C12x30 member 25 mm dia bolts fy=345 MPa, fu= 448 MPa Ae= 0.9 An

Q: In relation to the "primary structure" or "released structure" in the flexibility (force) method:…

A: (d) option is correct After the structure is released from the redundancy the resulting structure…

Q: The estimated cost of paving and marking the parking lot is $. (Round to the nearest dollar.) The…

Q: A non-prismatic member ij has the following stiffness matrix and the fixed-end moment vector 2.5 S40…

A: in question non prismatic member is given with stifness matrix and moment matrix and question is…

Q: PROBLEM 05. A stepped shaft has the appearance shown in fig. The region AB is Al2014-T6 alloy,…

Q: 9. At time t = 0 the level of water in tank A shown in Fig. P8.23 is 2 ft above that in tank B. Plot…

Q: Determine the required stirrup spacing for a 10mm diameter U stirrups. In a reinforced concrete beam…

A: Design moment capacity : The greatest moment carrying capacity for the beam that is regarded safe…

Q: Given: Beam with loading and supports shown Maximum allowable stress in the steel bar is 30 ksi…

Q: A 2.5 m rectangular channel carries 6 m3/sec of flow at a depth of 0.5 m. calculate the height of…

A: Given data: b= 2.5 m d= 0.5 m Q= 6 m3/sec

Q: Given: Beam with loading and supports shown Maximum allowable stress in the steel bar is 30 ksi…

Q: In a seismic hazard analysis, the magnitude of the earthquake (Richter's scale) is modeled with a…

A: Given data, Mean μ = 4.0 Standard deviation σ = 2.0 Observation point x = 9.0

Q: 00 is in meters.

A: r=500m=1640.42ftVelocity vA=30mph=44fpsacceleration:aA=vA2r=4421640.42=1.18018fts2

Q: D 16' w = 1 kip/ft w = 1 kip/ft B C w = 1 kip/ft 20-

Q: 30 If the aliowa ble stresses are: 150 mm 6t = 165Mi,'sc=100MPA, T=F01Ypar determinet max. value of…

Q: The T-section beam shown in the figure below is required to resist an ulti of Mu = 460 kN m. The…

Q: The coefficients of permeability of a soil in horizontal and vertical directions are 3.46 and 1.5…

Q: Calculate the permissible ultimate moment capacity of the beam shown in the figure. Use fy= 415 MPa…

Q: A simply supported 4-m long beam is made up of 80% grade Malugai. The beam is carrying a uniform…

Concept explainers

Load and resistance factor design

Load and resistance factors design (LRFD), also known as Limit state design (LSD), refers to the design method used in building engineering. A boundary condition is a condition of a structure where it can no longer meet the relevant design requirements. The condition may refer to the load level or other actions on the structure, while the terms refer to the integrity of the structure, suitability for use, durability, or other design requirements. A structure designed for LRFD is limited to keeping track of all possible actions during its design time and is always ready for use, with the appropriate level of reliability in each boundary condition. LRFD-based construction codes clearly define the appropriate levels of reliability in their instructions.

Question

Design a footing with one side limited
to 2.50 m for the following: 300 mm x
300 mm edge column, D = 578 kN, L =
689 kN, fc' = 21 MPa, fy = 413.70 MPa,
qa = 192 kPa, and a distance from top
of backfill to bottom of footing = 1.20
m.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step 3

VIEW

Step by step

Solved in 3 steps with 3 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

Refer to the rectangular combined footing in Figure 10.1, with Q1 = 100 kip and Q2 = 150 kip. The distance between the two column loads L3 = 13.5 ft. The proximity of the property line at the left edge requires that L2 = 3.0 ft. The net allowable soil pressure is 2500 lb/ft2. Determine the breadth and length of a rectangular combined footing.
For the rectangular footing (3 m x 4 m); if e = 0.5 m and q max = 200 KN/m?. Determine whether the design is good or not?
Q/ for the circular footing 5m diameter . find the thickness of footing if (factor of safety = 3) . salty sand . Ƴsaturated = 19 kN/m3 C = 10 kN/m2 ƴd = 15 kN/m3
A 1.5 m square footing is founded at a depth of 1m (equal to the foundation thickness) in fine-grained soil with the following properties: ?dry = 20 kN/m3; ?sat = 22 kN/m3; ?u,k = 70 kPa; ?k′ = 10 kPa; ?k′ = 30° The load on the footing is vertical but has a maximum eccentricity (?) of 250 mm from one axis (Hint: B- = B − 2e). If the water table is at the foundation level, determine the design bearing resistance of the footing for a. short-term condition b. long-term condition
Determine the ultimate bearing capacity of a 1.3 m wide strip footing foundedat a depth of 1m below the ground surface. Soil parameters are φ′ = 36° c′ =10 kPa, and γ = 18 kN/m 3.
A 460 mm reinforced concrete interior spiral column carries service loads of 1025 kN dead load and 715 kN live load (Figure 3). The column rest on a square spread footing 2.75 m x 2.75 m in dimension. The net ultimate soil pressure at the base of the footing is 314 kPa, f’c =21 MPa, fy = 345 MPa, clear cover is 75 mm and 25 mm-diameter bars, the allowable soil pressure is 250 kPa? Unit weight of soil is 17kN/m3 ; unit weight of concrete is 23.5 kN/m3. The underside of footing is 1.50m below the natural grade line
a) A square footing placed at a depth of 1 m is required to carry a load of 1000 kN. Find the required size of footing given the following data. C = 10 kPa, ϕ = 38o, γ = 19 kN/m3, Nc = 61.35, Nq = 48.93, Nγ= 74.03 and F = 3.Assume water table is at the base of footing.
Determine the width needed for a wall footing to support loads: D = 263 KN/m and L = 176 KN/m. In addition, a moment of 53 KN m must be transferred from the column to the footing. Assume the footing is 450 mm. thick, its base is 1.5 m below the final grade, and qa = 192 KPa.
A square footing of 13 x 13 ft is founded at a depth of 5 ft below the ground level. The imposed pressure at the base is 8732 lb/ft 2 . Determine the vertical pressure at a depth of 24 ft below the ground surface on the center line of the footing?
A4-ft-wide long footing is located at the top of a slope whose inclination is 30°. The soil of the hill is sand with an assumed angle of internal friction of 30°. If the D/B ratio is 1 and the b/B ratio is also 1, what loading can be imposed on the footing per foot of length? Use a factor of safety of 3.
For the rectangular footing (3m×4m) shown in figure. Calculate the factor of safety against general bearing capacity and determine whether design good or not. If,e= 0.35m and q max= 400 Kn/m^2.
A square footing which carries an axial load of 13000 kg has its bottom resting on a ground water table at a depth of 2.5 m from the ground surface. Nc = 35, Nq = 22, Nγ = 19. Take PDRY = 1910 kg/m3 and PSAT = 1600 kg/m3, c = 1800 kg/m2. Compute the net soil pressure.