Answered: Determine the maximum stress in a…

Determine the maximum stress in a hollow column of Do = 160mm and Di = 100mm that supports a load of 40KN and a bending moment of 4KN-m.

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter5: Stresses In Beams (basic Topics)

Section: Chapter Questions

Problem 5.9.4P: A circular pole is subjected to linearly varying distributed force with maximum intensity t0....

See similar textbooks

Related questions

Q: 5. The rigid beam rests on two short posts AC and 80 as shown Post AC is made from steel with E-200…

Q: A steel pipe (D = 3.500 in.; d = 3.068 in.) supports a concentrated load of P = 644 lb as shown. The…

Q: 1.61. L- The beam of length 5.2 (m) and cross section base 0.20 (m) and height 0.19 (m) shown is…

A: Given

Q: The piston of an automobile engine is held to the connecting rod by a wrist pin having an external…

A: (a) To find: The bearing pressure between rod end and the wrist pin. Given: The outer diameter of…

Q: A solid steel shaft, circular in cross section, has a change in diameter from 135 mm to 90 mm with a…

Q: 3. A turbine shaft made from steel (E-200GPA) is exposed to a resulting load F=5417N. The supports…

Q: Calculate the largest allowable load P that can be applied to the beam shown below if the maximum…

Q: PROBLEM 2-30 The W250x22 cantilevered beam is made of A-36 steel and it is subjected to the loading…

Q: 10 kips 40 kips 5kipilpt E B t. 6t. 8Ft t l0pt RA Rp

Q: A steel pipe (D = 3.500 in.; d = 3.068 in.) supports a concentrated load of P = 500 lb as shown. The…

Q: 1. Use the integration method to determine the slopes and deflection at points B and C of the beam…

A: givencantilever beam P=270kNload intensity w=45kN/mE=200GPaI=1665×106 mm4=1665×10-6 m4

Q: A strip of steel 3 mm thick and 35 mm wide is bent round a cylindrical drum 4 mm in diameter.…

A: As per our guidelines we are supposed to solve only one question if multiple questions are asked .…

Q: The bent link has a circular cross section with a diameter of d=15 mm and it is subjected to the…

Q: A shaft is supported in bearings, the distance between their centres being 1 metre. It camries a…

Q: The composite beam is made of steel (A) bonded to brass (B) and has the cross section shown in…

Q: -1m-- 1m ---lm Problem 3 A rigid rectangular beam has a weight of 20 kN acting at its center of mass…

A: G is the midpoint of CD; Taking the upper part from section X---X' Moment about C = 0; ∑M(C)=0 FBD…

Q: Q1: An I-section shown in Fig. is simply supported over a span of 15 m. If the maximum permissible…

Q: 2. By using Three Moment Equation, determine the deflection 3mto the left of roller support. 30 kN/m…

Q: The composite beam is made of steel (A) bonded to brass (B) and has the cross section shown in…

Q: Determine the moment M that should be applied to the beam in order to create a compressive stress at…

A: Determine moment of inertia for given beam Moment that should be applied to the beam for…

Q: Determine the value of moment that must be ap- plied to the left end of the beam in Figure P8.22 if…

A: Consider the reactions at support A is RA and the reaction at the roller support is RD. Let us draw…

Q: Consider a simple supported beam subjected to the load shown. The beam has a solid circular…

Q: A circular solid shaft, with an radius of 20 mm and a length of 5 m and thin bearings at both ends,…

A: step 1

Q: 50 kN 5kN/m В C D A I 70 kN 3 m - 5 m 2m W200 × 19.3 Draw the shear-bending moment diagram of the…

A: The FBD of the beam is given below, on taking moment about C, The force equilibrium in…

Q: 4. A cantilever beam 3 m long carries a concentrated load of 35 kN at its free end. The material is…

Q: 5.41 The inverted T-beam supports three concentrated loads as shown in the fig- ure. Find the…

A: To Find : The maximum allowable value of P . Given: The bending stress is σt=3.5 ksiTension, σc=8…

Q: *RII-4. Determine the maximum bending stress in the handle of the cable cutter at section a-a. A…

A: Given: The load acting on the handle, P = 22 kN The load parallel to the section a-a, The moment…

Q: A carriage spring 800 mm long is made of 12 plates of 40 mm width. Determine the thickness of the…

A: Leaf springs are made up of beams of uniform strength. It is used in automobiles to absorb the shock…

Q: 4. A wooden beam having a span of 4 m is subjected to a uniform load of 10 kN/m. It has a triangular…

Q: A circular cylindrical shaft is made of steel with yield stress ys = 700 MPa. The shaft is…

Q: A circular specimen with a diameter of 1.5 and a length of 11.74 was subjected to a force equal to…

A: Given data: d=1.5 inL=11.74 inF=150 lb Need to determine the maximum bending moment, moment of…

Q: Calculate the value of El6 at the center of the supports of the beam in the following figure: 120 kN…

Q: 2. A shaft made of mild steel. The supported length of the shaft is 3 meters. It carries two pulleys…

A: From the figure it is clear that the beam is subjected to symmetric loading Therefore, RA=RB…

Q: 2 lgium M=1.96 KN-mm Detrmine a bending stresses of beam. 200mm 125 3 50 250 mm. 125mm 25 -1

Q: Find the length of the part 1 and 2 of the steel bar if the total deflection under the forces shown…

A: Given data, δT = Total deflection = 0.5 cm = 0.005 m E = Modulus of rigidity of the bar = 200 x109…

Q: 12 kN 8 kN/m 50 kN-m A B -5 m 4 m-

A: Given Total length of beam L=5+4=9 m Uniform load of magnitude 8 kN/m acting over a span of 5 m from…

Q: b) In this part, assume that; the shaft has constant circular cross-section and its diameter is 1…

A: Note:As per our guidelines we are supposed to answer only one question. Kindly repost other…

Q: Determine the controlling slenderness ratio for the column, and use this to calculate the elastic…

A: slenderness ratio is defined as the ratio of effective length of the column to radius of gyration of…

Q: A beam has a bending moment of 3.5 kN-m applied to a section with a hollow circular cross-section of…

A: Since you have asked a question with multiple parts in a single request we would be answering only…

Q: h F The beam of length 5.9 (m) and cross section base 0.10 (m) and height 0.16 (m) shown is made of…

Q: A beam has a bending moment of 3 kN-m applied to a section with a hollow circular cross-section of…

A: We are suppose to solve only 3 subparts. Please post other parts as a separate question.

Q: Hwi Abeam had subjected to a postive bending moment of 5 KN.m. The ưoss-Sedionae dimensions are…

Q: A shaft carrying a load of 5 kN midway between two bearings is shown in Figure. Determine the…

Q: A solid steel shaft, circular in cross section, has a change in diameter from 135 mm to 90 mm with a…

Q: Q/ Find the bending stress at point k ? 10 mm 5 kN-m 40 mm 5 kN-m K 150 mm H 15 120 mm

Q: A beam of circular cross-section has a length of 5m and is simply supported at its ends. It is…

A: Given data: The length of the beam is L=5 m The maximum bending stress is σb=13 MPa The maximum…

Q: A simply supported beam of span 3.0 m has a cross-section 120 mm × 180 mm. If the permissible stress…

A: Given: The span of the beam is, l=3 m. The depth of the beam is, d=120 mm The width of the beam is,…

Concept explainers

Combined Loading

Any functioning component, such as machine parts, structural members, pressure vessels, and so on, are all under the influence of more than one force. When anybody is under the influence of more than one force such as shear forces, bending moments, axial forces, torsion, and so on, then such body is said to be under combined loading. A very practical example of combined loading is the crankshaft of an internal combustion engine (IC engine). The crankshaft of the IC engine is under high rpm, which is caused due to the torsional forces. Due to the presence of piston, counterbalances, and internal imbalances, the crankshaft experiences lateral forces and due to the rise in temperature, the crankshaft undergoes thermal expansion, which pulls the crankshaft along the axial direction and lateral direction. The presence of unbalanced loads along the periphery of the crankshaft also induces a bending moment.

Question

Determine the maximum stress in a hollow column of D_o= 160mm and D_i= 100mm that supports a load of 40KN and a bending moment of 4KN-m.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps with 1 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

An aluminum bar having a rectangular cross section (2.0 in. × 1.0 in.) and length L = 30 in. is compressed by axial loads that have a resultant P = 2800 lb acting at the midpoint of the long side of the cross section (sec figure). Assuming that the modulus of elasticity E is equal to 10 × 106 psi and that the ends of the bar are pinned, calculate the maximum deflection and the maximum bending moment Mmax.
An aluminum box column with a square cross section is fixed at the base and free at the top (sec figure). The outside dimension b of each side is 100 mm and the thickness t of the wall is 8 mm. The resultant of the compressive loads acting on the top of the column is a force P = 50 kN acting at the outer edge of the column at the midpoint of one side. What is the longest permissible length Lmaxof the column if the deflection at the top is not to exceed 30 mm? (Assume E = 73 GPa
A frame ABCD is constructed of steel wide-flange members (W8 x 21; E = 30 x ID6 psi) and subjected to triangularly distributed loads of maximum intensity q0acting along the vertical members (see figure). The distance between supports is L = 20 ft and the height of the frame is h = 4 ft. The members are rigidly connected at B and C. Calculate the intensity of load q0 required to produce a maximum bending moment of 80 kip-in. in the horizontal member BC. If the load q0 is reduced to one-half of the value calculated in part (a), what is the maximum bending moment in member BC? What is the ratio of this moment to the moment of 80 kip-in. in part (a)?
A beam supporting a uniform load of intensity q throughout its length rests on pistons at points A, C and B (sec figure). The cylinders are filled with oil and are connected by a tube so that the oil pressure on each piston is the same. The pistons at A and B have diameter d1and the piston at C has diameter D2. (a) Determine the ratio of d2to d1so that the largest bending moment in the beam is as small as possible. Under these optimum conditions, what is the largest bending moment Mmaxin the beam? What is the difference in elevation between point C and the end supports?
A steel W 310 x 52 column is pin-supported at the ends and has a length L = 4 m. The column supports two eccentrically applied loads J\ = 750 kN and P2= 500 kN (see figure). Bending occurs about axis 1-1 of the cross section, and the eccentric loads are applied on axis 2-2 at distances of 200 mm from ccntroid C. Calculate the maximum compressive stress in the column. Assume that modulus elasticity E = 200 GPa.
A brass bar of a length L = 0.4 m is loaded at end B by force P = 10 kN with an eccentricity e = 6mm. The bar has a rectangular cross section with an h/b ratio of 1.5. Find the dimensions of the bar if the deflection at the end is limited to 4 mm. Assume that E = 110 GPa.
Plot the load-deflection diagram for a pinned-end column with eccentric axial loads (see figure) if the eccentricity e of the load is 5 mm and the column has a length L = 3.6 m, moment of inertia L = 9,0 × 106 mm4, and modulus of elasticity E = 210 GPa. Note: Plot the axial load as ordinate and the deflection at the midpoint as abscissa.
A flying but tress transmit s a load P = 25 kN, acting at an angle of 60º to the horizontal, to the top of a vertical buttress AB (see figure). The vertical buttress has height h = 5.0 m and rectangular cross section of thickness t = 1.5 m and width b = 1.0 m (perpendicular to the plane of the figure). The stone used in the construction weighs y = 26 kN/m3. What is the required weight W of the pedestal and statue above the vertical buttress (that is, above section A) to avoid any tensile stresses in the vertical buttress?
A cant i levé r b ea m i s supported by a tie rod at B as shown. Both the tie rod and the beam are steel with E = 30 x 106 psi. The tie rod is just taut before the distributed load q = 200 lb/ft is applied. Find the tension force in the tie rod. Draw shear-force and bending-moment diagrams for the beam, labeling all critical ordinates.
A square tube section has side dimension of 20 in. arid thickness of 0.5 in. If the section is used for a 10-ft-long beam subjected to 1250 kip-in, torque at both ends, calculate the maximum shear stress and the angle of twist between the ends. Use G = 11,600 ksi.
An S6 × 12.5 steel cantilever beam AB is supported by a steel tic rod at B as shown. The tie rod is just taut when a roller support is added at Cat a distance s to the left of £, then the distributed load q is applied to beam segment AC, Assume E = 30 × 106 psi and neglect the self-weight of the beam and tie rod. Sec Table F-2(a) in Appendix F for the properties of the S-shape beam. (a) What value of uniform load q will, if exceeded, result in buckling of the tie rod if L1, =6 ft, s = 2 ft, H = 3 ft, and d = 0.25 in.? (b) What minimum beam moment of inertia ibis required to prevent buckling of the tie rod if q = 200 lb/ft, L1, = 6 ft, H = 3 ft, d = 0.25 in., and s = 2 ft? (c) For what distance s will the tic rod be just on the verge of buckling if q = 200 lb/ft, L1= 6 ft, M = 3 ft, and d = 0.25 in.?
A steel bar has a square cross section of width b = 2.0 in. (sec figure). The bar has pinned supports at the ends and is 3.0 ft long. The axial forces acting at the end of the bar have a resultant P = 20 kips located at distance e = 0,75 in, from the center of the cross section. Also, the modulus of elasticity of the steel is 29,000 ksi. Determine the maximum compressive stress max, in the bar. If the allowable stress in the steel is 18,000 psi, what is the maximum permissible length Lmaxof the bar?