Duct Pressure Drop: Determine the pressure drop, in inches of H20, for 300 feet of 12"diameter duct with 600 CFM of air flow. If the size is reduced to 10", what is the pressuredrop? If the duct is instead changed to a rectangular duct 10"x14", what is the pressuredrop?.Duct sizing: When reviewing the mechanical plans for an office building, you notice thatthe ME has run an 18" diameter duct above a ceiling where you know there is a beamobstruction. You determine that there is a maximum of 12" of space between the top ofthe ceiling and the bottom of the beam. If this duct carries 2,000 CFM, determine theequivalent rectangular size of ducting that you would propose the engineer, so that thepressure drop remains similar. What is the resultant velocity (FPM) in both the roundduct and the rectangular duct?

Name: Duct Pressure Drop: Determine the pressure drop, in inches of H20, fo
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: Duct Pressure Drop: Determine the pressure drop, in inches of H20, for 300 feet of 12"diameter duct with 600 CFM of air flow. If the size is reduced to 10", what is the pressuredrop? If the duct is instead changed to a rectangular duct 10"x14", what

As per the guidelines, I can solve only first question. For rest question, repost in a separate…

Engineering

Mechanical Engineering

Duct Pressure Drop: Determine the pressure drop, in inches of H20, for 300 feet of 12" diameter duct with 600 CFM of air flow. If the size is reduced to 10", what is the pressure drop? If the duct is instead changed to a rectangular duct 10"x14", what is the pressure drop?

Duct Pressure Drop: Determine the pressure drop, in inches of H20, for 300 feet of 12" diameter duct with 600 CFM of air flow. If the size is reduced to 10", what is the pressure drop? If the duct is instead changed to a rectangular duct 10"x14", what is the pressure drop?

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Example 3.8.In Example 3.7 we considered a vacuum system with zero leaks. No real vacuum systems aretotally leak-free; engineers work very hard to keep the leakage rate as low as possible. If thetank in Example 3.7 has a leak of 0.0001 lbm/min of air, what will the pressure-time plot looklike, and what will be the final pressure? ex: 3.7 is posted
Air flows through a duct at 2,700 cubic feet per minute (CFM). After several feet and a few vents, the air-flow decreases to 1,890 CFM. What is the percent drop that has occurred? (Simplify your answer completely.)
Air at 15°C flows through a large duct and thence through a 75-mm-diameter hole in the thin metal (c= 0.62). A U-tube gage containing water registers 31.7 mm. Considering the specific weight of air constant, what is the flow through the opening?
Pressure loss along a pipe pumping water is 6.6Pa. If the pipe is 2.1m long, what angle (in degrees) must it be orientated to the horizontal to overcome the pressure drop?
A wind tunnel has an incompressible flow of air, flowing horizontally from an inlet section, 7 times the test section. A u-tube is connected, containing mercury inside. The mercury has 1.33x10^5 N/m^3 specific weight. The condition of the air at the inlet section is at 1 atm and 280K respectively. What is the change of height inside the mercury, when the velocity at the throat is 70m/s?Complete solutionround off to 4 decimal places
A Pitot tube at a height of 3 m, measures wind velocity 5.3 m/s. What is the wind velocity at a height of 50 m? If the center of a 45 m diameter wind turbine is placed at 50 m, what is the maximum power this turbine may produce?
Please solve it correctly,Urgent. Question: The discharge pressure of a water pump is 9, 000 kPa. The temperature is 150 deg deg C and density is 917 kg/m3. What is the equivalent pump head in meters? A. 11.005 m B. 1,000.5 m C. 1,050.5m D. 1, 100.5 m
write legibly Complex Pipeline System_Series Pipes 1. Three new cast-iron pipes were connected in series: pipe 1, 12 in. diameter and 1200 ft long; pipe 2, 24 in. diameter and 2000 ft long; and pipe 3, 18 in. diameter and 1500 ft long. If the total flow in the system is 8.0 cfs, determine the (a) total lost head, ft; and(b) the equivalent length of a 20 in. diameter pipe. Use a C value of 120 for all pipes. (a) total lost head : _______________________ ft(b) equivalent length : _______________________ ft
Nitrogen gas under a pressure pn = 15 psig is used for pumping kerosene at 25°C (density = 816 kg/m3, viscosity = 1.81 cP) through an elevation increase of 6 m. If there is an effective length of 45 m of nominal 2-in. schedule No. 40 pipe (commercial steel) between the two tanks, what is the flow rate of kerosene? Neglect exit kinetic-energy effects.
1. You are tasked to supervise the design of 0.5MW wind turbine to be constructed in a Wind Farm in Pililla, Rizal. Suppose the design criteria are as follows: The air density as surveyed after 2 year period averaged at 1.225 kg / cubic meter. The sweeping diameter of the rotor blades is 125m, and the anemometer reading in the area amounts to 4.2m/s on a 2 year period of survey. In the design specifications given, if the actual measurement of power via the substation amounts to exactly 530kW and given that the windspeed is off by 0.05m/s, what could have been the error in the measurement of diameter? Your answer must be in 3 decimal places and in correct signs and measurement. Show complete solution in paper.
5. The total head of a fan is 185 m and has a static efficiency pressure of 210 mm of water gage.What is the velocity of air flowing if the density of air is 1.15 kg per cubic meter? 8. A coal fired steam boiler uses 3000 kg of coal per hour. Air required for combustion is 15.5 kg ofcoal at barometric pressure of 98.2 KPa. The flue gas has temperature of 285 degree Celsiusand an average molecular weight of 30. Assuming an ash loss of 11% and allowable gas velocityof 7.5 meters per second. Find the diameter of the chimney 9. The gas density is 0.75 kg per cubic meters and air density is of 1.15 kg per cubic meter. If thedriving pressure is 0.25 KPA. Determine the height of the chimney. 10. A powerplant situated at an altitude having an ambient air of 96.53 KPa and 23.88 degreeCelsius. Flue gases at a rate of 5.0 kg per second enter the stack at 200 degree Celsius andleaves at 160 degree Celsius. The flue gases gravimetric analysis are 18% CO2, 7% O2 and 75%N2. Calculate the height of…
A liquid with a specific gravity of 4.7 and a viscosity of 1.3 cp flows through a smooth pipe of unknown diameter, resulting in a pressure drop of 0.183 lbf/in² for 1.73 mi. What is the pipe diameter in inches if the mass flowrate is 5,900 lb/hr?A. 3.64 inB. 0.44 inC. 5.74 inD. 0.005 in