write legibly  Complex Pipeline System_Series Pipes 1. Three new cast-iron pipes were connected in series: pipe 1, 12 in. diameter and 1200 ft long; pipe 2, 24 in. diameter and 2000 ft long; and pipe 3, 18 in. diameter and 1500 ft long. If the total flow in the system is 8.0 cfs, determine the  (a) total lost head, ft; and(b) the equivalent length of a 20 in. diameter pipe. Use a C value of 120 for all pipes. (a) total lost head : _______________________ ft (b) equivalent length : _______________________ ft

Q: 5. The total head of a fan is 185 m and has a static efficiency pressure of 210 mm of water gage.…

A: Dear student,                    According to the guidelines I am allowed to answer only one problem…

Q: For water flowing in a pipe of 8 inches diameter at 65 oC and 0.01 ft3/s, what will be the entry…

A: Given: D=8 in=0.2032 mT=65°CQ=0.01 ft3/s=0.0002831685 m3/s

Q: 1. Water flows at a rate of 65 Li/min in a steel pipe of 45 mm diameter, K = 0.045x10 3 m, u = 0.001…

A: Note: Since you have asked multiple questions, we will solve the first question for you. If you want…

Q: Q2- A (0.14 m/s) oil has (density 880 kg/m & viscosity 0.026 pa.s) is pumping from first tank to…

A: Given: Volumetric flow rate of the oil Q=0.14m3/s Density of the oil=880kg/m3 Viscosity…

Q: h. Answer with True (T) or False (F). 5. In pipe series system velocities are equal. 6. In parallel…

A: 5. For pipe in series the flow rate is same, not velocity (as diameter changes velocity will vary).…

Q: In the system shown, the water discharge flow rate of 0.0025 m³/s is delivered through the 8 cm…

A: Given data: ◆ The diameter and length of the cast iron pipe: D = 8 cm = 0.08 m , L = 388 m ◆ The…

Q: A tank carrying benzene is unloaded (P = 1.05 bar). The used pipeline is 225 mm internal diameter…

A: Given that, Pressure in the tank, P1=1.05 bar,Diameter of pipe, D=225 mm,Length of pipe, L=1500…

Q: Calculate the flow through a three-new steel pipes connected in series having diameters of 6 in., 8…

A: Given data: The diameter of pipe 1, d1 = 6 in. The diameter of pipe 2, d2 = 8 in. The diameter of…

Q: In the system shown, the water discharge flow rate of 0.0025 m³/s is delivered through the 8 cm…

A: Given data: ◆ The length and diameter of the pipe: L = 406 m , d = 8 cm = 0.08 m ◆ The average…

Q: Q2- A (0.14 m'/s) oil has (density 860 kg/m' & viscosity 0.026 pa.s) is pumping from first tank to…

A:

Q: a) Determine the radial positions of a pitot tube for a 6-point traverse in a 0.3 m inner diameter…

A: Solution: Given Data: D=0.3 m   Note: Dear User! As per our guidelines, we are only allowed to…

Q: (Hardy Cross Method (2 iterations) and EPANET) For the same system, determine the pressures and…

A: applying the bernoullis equation we get P1ρg+V122g+z1=P2ρg+V222g+z20.8 x 14462.4 x 39.17+d22 x…

Q: Water discharge flow rate of 0.002 m3/s is delivered through the 20 mm commercial steel pipe? €=0.25…

A: Given:Q=0.002 m3/sd=20 mm =0.02 mμ=0.001 Kg/m.sρ=1000 Kg/m3L=575 m

Q: Water (at 20C) flows through a pipeline connected in series, as shown in the Figure. The…

A: Bernoulli's theorem Bernoulli's theorem says that total energy at inlet is equal to total energy at…

Q: A fluid is flowing in a round pipe. The Reynolds number is Re = 3 x 10°. The relative roughness is =…

A:

Q: A 36-in-diameter pipeline carries oil (SG = 0.89) at1 million barrels per day (bbl/day) (1 bbl = 42…

A: Given data as per question Pipe diameter = 36 in Specific gravity of oil =0.89 flow rate = 1 million…

Q: A 50 mm diameter siphon discharges oil (SG=0.88) from a reservoir (elev. 20m) into open air (elev.…

A:

Q: For oil (SG = 0.86. u = 0.025 N-s/m? ) flow of 0.24 m/s through a round pipe with diameter of 521…

A:

Q: Q2- A (0.14 m/s) oil has (density 880 kg/m & viscosity 0.026 pa.s) is pumping from first tank to…

A: Given: The flow rate is 0.14 m3/s. Density of the oil is 880 kg/m3. Viscosity is 0.026 pa.s Diameter…

Q: Find the pressure at point 2 given the isometric drawing of the commercial steel pipeline indicating…

A:

Q: Determine the pressure drop over a reducer with the following conditions: Fluid density: 25 kg/m3…

A:

Q: he figure shown below is a series pipeline system used to draw a fluid from a lower source open tank…

A: Given       Volume flow rate: Q=0.015 m3/s                     Length: Ld=100 m Elevation…

Q: 6. SAE 10 oil is being released from a main reservoir to a smaller reservoir. The pipeline consists…

A: ◆ The total head loss in the pipeline is the summation of major head loss and minor head loss. ◆…

Q: Lir at 68 degrees Celsius is beirig pumped through a pipe of internal liameter 6.4 inches. If the…

A: The flow property whether it is laminar or turbulent is determined by the value of Reynold's number.…

Q: 1. If your aim is to get a high-accuracy from a flow measurement in pipe or chann flow, which…

A: 1. The flow measurement is defined as the measurement of the dynamic properties of a flow in a pipe…

Q: You are working as a trainee engineering in a company ABC, is the leading manufacturing company for…

A:

Q: 6. With reference to the pipe flow, which of the following sentences are correct? A. In laminar…

A: As per our guidelines, we are restricted to answer only 2 or 3 questions that are similar to like…

Q: A pipeline is conveying 0.05 m3 /s of water, at 30°C. The length of the line is 300 m, and the…

A: Given, Q=0.05m3/s, t=30°C, L=300m, d=0.25m. a) Head loss due to friction using Darcy–Weisbach (k௦=…

Q: Discussion 1- Indicate the factors affecting the Reynotes number (Re). 2. The limits are gaved to…

A: 1. The Reynolds number is calculated as  : Re=ρVDμhere,ρ is the density of fluid in kg/m3V is the…

Q: A smooth plastic pipe is to be designed to carry 10 (ft^3)/s of water at 20°C (68°F) through 1750 ft…

A:

Q: Determine the smallest metric hydraulic copper tube size that will carry 4L/min of the following…

A:

Q: Write legibly 5. A series galvanized iron pipes (C = 120) consisting of 20 in. diameter of length…

A: Given Data→convert values from inch to feet1 feet = 12 inchD1=20 in =1.667 feetD2=16…

Q: Water flows at a rate of 65 Li/min in a steel pipe of 45 mm diameter, K = 0.045x10-3 m, μ = 0.001…

A:

Q: For the following data given for a horizontal pipeline, predict gas flow rate in cu ft/hr. through…

A: Weymouth Equation QE = CEbn( P12- P22sxLTZ)y TsPsk, ρs = 2.7PsS/ Tsc - constant, weymouth =…

Q: flow rate of water in a garden hose is measured using the bucket-andstopwatch method. Filling a 5-L…

A:

Q: determine total head loss of the system and gauge pressure p2 in order to deliver water at 2…

A: For solution refer below images.

Q: Series pipe ABCD consists of 10,000 ft of 20′′, 8000 ft of 16′′, and L ft of 12′′ (C = 120). What…

A: Given: The length of pipe AB, L1 = 10,000 ft The diameter of pipe AB, D1 =20 in = 1.666 ft The…

Q: Oil (SAE 30) at 15.6°C flows steadily between fixed, horizontal, parallel plates. The pressure drop…

A: given; ⇒pressure drop per unit length -dpdx=40kpa/m…

Q: P₂ * 1/3 + 2,5-1,8 = 2/3 +² ₂ === Y OB.h₂ = (2₂-2₂) +h, OCP₁ 7 -2₁ - 1₁ + 1 = 21/2² +2₂ 7 - +²₂+. 2g…

A: Volume flow rate: Q=0.015 m3/s Elevation difference:  h=8.0m Suction line:…

Q: In the design of a 500m long water pipeline it is proposed to keep head loss, hf, less than 6m for a…

A:

Q: A pipe system, connecting two reservoirs whose difference in water surface elevation is 13 m,…

A:

Q: Water is pumped from che large tank shown in the igure. The loss in the piping is equal to 2V2 -…

A: Apply Bernoulli's equation from the free surface to the exit point and determine the pump head loss

Q: The length of a tube carrying fluid is increased by 1.75 times its original value. All other…

A:

Q: 10.32 Water at 20°C flows through a 3 cm ID smooth brass tube at a rate of 0.002 m³/s. What is ƒ for…

A: Hello. Since you have posted multiple questions and not specified which question needs to be solved,…

Q: A pump delivers 1 hp to a water at 68°F flowing in a 10-in-diameter horizontal, cast iron pipe at V…

A:

Q: A pumped fluid distribution system is being designed to deliver 400 gal/min of water to a cooling…

A: Write the given data. Q=400 gal/min

Q: 2 - When the pitot tube is moved vertically: velocities? Explain

A: As per Bartleby guideline we are bound to give only answer of one question , so please post other…

Q: Oil (SAE 30) at 15.6 °C flows steadily between fixed, horizontal, parallel plates. The pressure drop…

A:

Q: Water mass flow rate of 2kg/s is delivered through the 30 mm commercial steel pipe? -0.15 Calculate…

A: Given: mass flow rate of water→m˙=2 Kgs Diameter of the commercial steel pipe→D=30 mm=0.030 m So…

Applied Fluid Mechanics

A fluid is a substance that is continuously deformed by the application of shear stress. The rate of deformation of a fluid depends on its viscosity. The fluid tries to flow when it interacts with some other system.