Steam enters the turbine of a vapor power plant at 600 lbf/in.?, 700°F and exits as a two-phase liquid-vapor mixture at 90°F.Condensate exits the condenser at 85°F and is pumped to 600 lbf/in.2 The turbine and pump isentropic efficiencies are 90 and 80%,respectively. The net power developed is 1 MW.Determine:(a) the percent steam quality at the turbine exit.(b) the percent thermal efficiency.(c) the steam mass flow rate, in Ib/h.

eam enters the turbine of a vapor power plant at 600 Ibf/in.?, 700°F and exits as a two-phase liquid-vapor mixture at 90°F. ondensate exits the condenser at 85°F and is pumped to 600 lbf/in.? The turbine and pump isentropic efficiencies are 90 and spectively. The net power developed is 1 MW. etermine: O the percent steam quality at the turbine exit. ) the percent thermal efficiency. the steam mass flow rate, in Ib/h.

eam enters the turbine of a vapor power plant at 600 Ibf/in.?, 700°F and exits as a two-phase liquid-vapor mixture at 90°F. ondensate exits the condenser at 85°F and is pumped to 600 lbf/in.? The turbine and pump isentropic efficiencies are 90 and spectively. The net power developed is 1 MW. etermine: O the percent steam quality at the turbine exit. ) the percent thermal efficiency. the steam mass flow rate, in Ib/h.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Superheated steam at 18 MPa, 560C, enters the turbine of a vapor power plant. The pressure at the exit of the turbine is 0.06 bar, and liquid leaves the condenser at 0.045 bar, 26C. The pressure is increased to 18.2 MPa across the pump. The turbine and pump have isentropic efficiencies of 82 and 77%, respectively. For the cycle, determine (a) the net work per unit mass of steam flow, in kJ/kg. (b) the heat transfer to steam passing through the boiler, in kJ per kg of steam flowing. (c) the thermal efficiency. (d) the heat transfer to cooling water passing through the condenser, in kJ per kg of steam condensed.
Please help!!!! Refrigerant 22 enters the compressor of an ideal vapor-compression refrigeration system as saturated vapor at -30°C with a volumetric flow rate of 10 m3/min. The refrigerant leaves the condenser at 19°C, 9 bar. Determine: (a) the magnitude of the compressor power, in kW. (b) the refrigerating capacity, in tons. (c) the coefficient of performance. (d) the rate of entropy production for the cycle, in kW/K. Answer for part (a): 52 kW Answer for part (b): 59 tons Answer for part (c): 3.98 Please answer part also d! That's the part I also need. Thank you!
Superheated steam at 18 MPa, 560C, enters the turbine of a vapor power plant. The pressure at the exit of the turbine is 0.06 bar, and liquid leaves the condenser at 0.045 bar, 26C. The pressure is increased to 18.2 MPa across the pump. The turbine and pump have isentropic efficiencies of 82 and 77%, respectively. For the cycle, determine (a) the net work per unit mass of steam flow, in kJ/kg. (b) the heat transfer to steam passing through the boiler, in kJ per kg of steam flowing. (c) the thermal efficiency. (d) the heat transfer to cooling water passing through the con- denser, in kJ per kg of steam condensed.
Superheated steam at 20 MPa, 560 deg C enters the turbine of a vapor power plant. The pressure at the exit of the turbine is 0.5 bar, and liquid leaves the condenser at 0.4 bar at 75 deg C. The pressure is increased to 20.1 MPa across the pump. The turbine and pump have isentropic efficiencies of 81% and 85%, respectively. Cooling water enters the condenser at 20 deg C with a mass flow rate of 70.7 kg/s and exits the condenser at 38 deg C. For the cycle, determine (a) the mass flow rate of steam, in kg/s. (b) the thermal efficiency.
Thermodynamics: - Clear writing please!!! Thank you - Sketch and label all numbers on the turbine. - Sketch and label all numbers on the process on a T-s diagram. 7.133E A large condenser in a steam power plant dumps 15 000 Btu/s by condensing saturated water vapor at 115 F with an ambient temperature of 77 F. What is the entropy generation rate?
Air enters the compressor of an ideal Brayton refrigeration cycle at 100 kPa, 270 K. The compressor pressure ratio is 3 and the temperature at the turbine inlet is 310 K. Determine:(a)the net work input, per unit mass of air flow, in kJ / kg.b) the cooling capacity, per unit mass of air flow, in kJ / kg.c).the coefficient of performance.d).the coefficient of performance of a Carnot refrigeration cycle operating between thermal reservoirs at TC 270 K and TH 310 K, respectively. The above Brayton refrigeration cycle is modified by introducing a regenerative heat exchanger. In the modified cycle, the compressed air enters the regenerative heat exchanger at 310 K and is cooled to 280 K before entering the turbine. Determine for the modified cycle:(e).the lowest temperature, in K.f).the net work input per unit mass of air flow, in kJ / kg. g).the cooling capacity, per unit mass of air flow, in kJ / kg.h).the coefficient of performance.Finally, consider in the analysis that the compressor…
A steam generator comprises a boiler, a superheater, an economizer, and an air preheater. The feedwater enters the economizer at 140 oC and leaves the boiler drum at 60 bar, 0.98 dries, and leaves the superheater at 450 oC. When using coal with a calorific value of 25.2 MJ/kg, the rate of evaporation is 8.5 kg steam per kg coal and the air-fuel ratio is 15:1 by mass. Neglecting heat losses and pressure drops, estimate the heat transfer per kg fuel in each component and the efficiency of the steam generator. What are the percentages of the total heat absorption taking place in the economizer, boiler, and superheater, respectively? Assume Cp of air and water as 1.005 and 4.2 kJ/kg-K, respectively.
Using Refrigeration 22 Table: PROPERTIES OF LIQUID AND SATURATED VAPOR An R22 standard refrigerating cycle operates at an evaporator pressure of 367.01 kPa and a condensing pressureof 1833.45 kPa. It is desired to increase the evaporator pressure from 367.01 to 602.28 kPa. DetermineFor 367.01 kPa Evaporator(a) temperature and degree superheat leaving the compressor(b) mass of vapor entering the evaporator(c) evaporator load(d) condenser load(e) work on the compressor(f) coefficient of performanceFor 602.28 kPa Evaporator(g) temperature and degree superheat leaving the compressor(h) mass of vapor entering evaporator 18 answers(i) evaporator load(j) condenser load(k) work on the compressor(l) coefficient of performanceShow the effects of increasing evaporator pressure(m) condenser load per ton of refrigeration(n) work on compressor per ton of refrigeration(o) mass flow rate of refrigerant per ton of refrigeration(p) volume capacity of compressor per ton of refrigeration R22 standard…
For the NH3/H2O cycle the following relationship give the solution flow rate per unit refrigeration rate: WFS_A * X - WFS_G(X-1) = 1 where WFS_A = mass fraction of NH3 in solution form the absorber WFS_G = mass fraction of NH3 in solution from the generator X-1 =mass of solution from the generator per unit mass of refrigerant flow For large systems, a reasonable pressure drop between the evaporator and absorber is 1.5 psi Consider a large NH3/H2O plant operating per the schematic below: Known/given: i. Refrigeration load = 500 tons ii. Evaporator temperature (state point 10) = 41.1 F iii. Evaporator pressure (state point 10) = 75 psia iv. Absorber pressure (state point 11) = 73.5 psia (per rule of thumb above regarding pressure drop between the evaporator and absorber) v. Strong aqua solution temperature (state point 3) = 105 F vi. Condenser temperature (state point 8) = 100 F vii. Condenser and tower pressure (state point 7) = 211.9 psia viii. Concentration split, WFS_G - WFS_A =6%…
Air enters the compressor of an air-standard Brayton cycle with a volumetric flow rate of 60 m³/s at 0.8 bar, 280 K. The compressor pressure ratio is 15, and the maximum cycle temperature is 2100 K. For the compressor, the isentropic efficiency is 92% and for the turbine the isentropic efficiency is 95%.Determine:(a) the net power developed, in kW. = 4.738E+4(b) the rate of heat addition in the combustor, in kW.(c) the percent thermal efficiency of the cycle.
Mechanical Engineering: Saturated R-134a vapour enters the compressor at 0.2 MPa and leaves the condenser asi saturated liquid at 0.8 MPa. Vapour leaves the irreversible compressor at 43.2"C. Estimate I a) COP, (b) Efectiveness of the cycle. Also, prepare energy & exergy balance sheet of the cycle.
Superheated steam (s. fig. C) at a pressure of 300 bar and a temperature of 550 ℃ enters a turbine made up of two stages. Steam exits the first stage of the turbine at 35 bar and gets reheated at a constant pressure at 550 ℃. Each stage of the turbine has an isentropic efficiency of 80%. The isentropic efficiency of the pump is 85%. The pressure of the condenser is 10 kPa. (a) Sketch the cycle in a T-s diagram and calculate the enthalpy at each point of the cycle. (b) Calculate the flow rate of the working fluid if the power output of the turbine is 100 MW. (c) Calculate the thermal efficiency of the cycle. (d) Double check the result for the heat rejected in the condenser.