Example 11.1 A compound gear train shown in Fig. 11.3 consists of compound gears B-C and D-E. All gears are mounted on parallel shafts. The motor shaft rotating at 800 rpm is connected to the gear A and the output shaft to the gear F. The number of teeth on gears A, B, C, D, E and F are 24, 56, 30, 80, 32 and 72 respectively. Determine the speed A 24 B C 30 56 D E A 32 80 Fig. 11.3 72

Example 11.1 A compound gear train shown in Fig. 11.3 consists of compound gears B-C and D-E. All gears are mounted on parallel shafts. The motor shaft rotating at 800 rpm is connected to the gear A and the output shaft to the gear F. The number of teeth on gears A, B, C, D, E and F are 24, 56, 30, 80, 32 and 72 respectively. Determine the speed A 24 B C 30 56 D E A 32 80 Fig. 11.3 72

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The figure below shows the power transmitted through a gear drive to multiple output shafts. Gear A is mounted on an electric motor with a rotational speed of 600rpm. Gear A drives a simple gear train consisting in gears B, C, D, and E and transfers the input power to each gear to the shaft on which is mounted. The power delivered from shafts B, C, D, and E are: 8hp, 12hp, 5hp, and 5hp, respectively. For simplicity, all gears have a diametral pitch of 3 and the following numbers of teeth: NA=75, NB=15, NC=120, ND=15, NE=36. The torque on shaft D is most likely: 2015 lb in 105 lb in 250 lb in 630 lb in
The figure below shows the power transmitted through a gear drive to multiple output shafts. Gear A is mounted on an electric motor with a rotational speed of 600rpm. Gear A drives a simple gear train consisting in gears B, C, D, and E and transfers the input power to each gear to the shaft on which is mounted. The power delivered from shafts B, C, D, and E are: 8hp, 12hp, 5hp, and 5hp, respectively. For simplicity, all gears have a diametral pitch of 3 and the following numbers of teeth: NA=75, NB=15, NC=120, ND=15, NE=36. The expected rotational speed on shaft E is most likely: 375 rpm 600 rpm 1250 rpm 3000 rpm
A two-step power transmission with two identical gear sets (pinions and output gears) is designed to carry 30 HP, has an input speed of 900 RPM, and an output speed of 100 RPM. What is the speed of the middle shaft? O 750 RPM O 600 RPM O 500 RPM 0 450 RPM O 300 RPM
what is the equation of the normal, transverse, and axial circular pitches in helical gears
For a pair of spur gears, one design decision is to specify the pressure angles. Please select the common values of pressure angle per textbook. 300 200 250
The output shaft diameter is typically larger than the input shaft diameter on worm drive gearboxes. Explain why
The shaft from a DC motor is connected to gear A which rotates at 45rps in clockwise direction. Gears B and C are compound gears as well as gears D and E. Gear A meshes with gear B and gear C drives gear D. Gear E meshes with gear F which is mounted on the driven shaft. The number of teeth on gears A, B, C, D, E and F are 21, 35, 49, 63, 56 & 84 respectively. Sketch the arrangement and determine the speed (rpm) and direction of gear F? Calculate the centre distance between the driver and driven shafts if the module of gears is 2.3 mm
mechanical principles Determine the velocity ratio for compound gear systems and the holdingtorque required to securely mount a gearbox.
Two spur gears transmit 36kW with a velocity ratio of 2:1. The speed of the smaller driving gear is 100rpm. The centre distance between the shafts is to be as near as possible to 920mm. If m=10 and all-21MPa, determine a) Diameter of the shafts b)PCD for each wheel c)Number of teeth on each wheel d) Actual centre distance [ e) Width of the teeth
lb pair of bevel gears having 20 and 75 teeth are used on axes that intersect at a 90" angle. Determine the velocity ratio and the pitch angles. of both gears.
In a gear power transmission situation, the torque apppied on one gear is always created by: ____, no matter whay types of gears employed. Normal Force Tangential Force Radial Force Axial Force
Examine the diagram of a gear set. What is the Diametral Pitch of these gears? What is the Gear Ratio? What will be the output torque of the Driven Gear? What will be the output speed of the Driven Gear?