Example 7.1 An electric motor weighing 10 kN is lifted by means of an eye bolt as shown in Fig. 7.13. The eye bolt is screwed into the frame of the motor. The eye bolt has coarse threads. It is made of plain carbon steel 30C8 (S,, = 400 N/mm²) and the factor of safety is 6. Determine the size of the bolt. Fig. 7.13 Eye Bolt

Example 7.1 An electric motor weighing 10 kN is lifted by means of an eye bolt as shown in Fig. 7.13. The eye bolt is screwed into the frame of the motor. The eye bolt has coarse threads. It is made of plain carbon steel 30C8 (S,, = 400 N/mm²) and the factor of safety is 6. Determine the size of the bolt. Fig. 7.13 Eye Bolt

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The cover of a cylindrical pressure vessel made of cast iron is shown in fig.1 The inner diameter of the cylinder is 500 mm and the internal pressure is limited to 2MPa. The cover is fixed to the cylinder by means of 16 bolts with a nominal diameter of 20 mm. Each bolt is initially tightened with a preload of 20 KN. The bolts are made of steel FeE250 (S yt = 250 N/ mm 2 ). Assume. E for steel = 207 KN/mm 2 ,E for cast iron = 100 KN/mm 2, E for Zinc = 90 KN/mm 2,Determine the factor of safety for bolts considering the effect of the gasket.
A flange coupling having 100 mm bolt circle radius and 22 mm thick uses 8 bolts, 16 mm diameter to connect two shafts. It is use to transmit 60 KW at 190 rpm. Determine the factor of safety in bearing if yield point in compression is 448 Mpa.
Coefficients of Static Friction: Steel on Rope: 0.3 Try to pull an Acme brand safe off of a stone cliff and onto the bird. The safe is made of steel, measures 24”W x 30”H, and weighs 282 lbs. How much force is required to slide the safe?
An industrial machine requires a solid, round piston connecting rod 200 mm long, between pin ends that is subjected to a maximum compression force of 80,000 N. Using a factor of safety of 2.5, what diameter is required if aluminum is used with properties Sy = 496 MPa and E = 71 GPa.
Determine the width and thickness of the leaves (in mm) of a leaf spring using the following specifications: Total load = 140 kN; Number of springs supporting the load = 4; Maximum number of leaves = 10; Span of the spring = 1000 mm; Permissible deflection = 80 mm; Modulus of elasticity, E = 200 kN/mm2; and allowable stress in spring material is 600 MPa.
A 20 mm thick flange coupling connects two shafts in order to transmit 250 kW at 100 rpm. It uses 6 bolts with a diameter of 20 mm located at a 210 mm bolt circle diameter. Determine the factor of safety based on compression between the bolt and flange. The yield point of the bolt is 450 MPa. A. 4.75 B. 3.75 C. 2.75 D. 5.75
Two pipes were connected by a flanged bolt coupling. The material properties are as follows: For outer bolts, 12 pieces, 16 mm diameter, on a mean radius of 150 mm, G = 28 GPa. For the inner bolts, 8 pieces, 12 mm diameter, on a mean radius of 100 mm, G = 20 GPa. Determine the total torque of the system if the shearing stress is limited to 30 MPa in the bolts. (Draw also the FBD) with complete solution
7.An exhaust fan fitted with 900 mm diameter pulley is driven by a flat belt from a 30 kW, 950 r.p.m. squirrel cage motor. The pulley on the motor shaft is 250 mm in diameter and the centre distance between the fan and motor is 2.25 m. The belt is 100 mm wide with a coefficient of friction of 0.25. If the allowable stress in the belt material is not to exceed 2 MPa, determine the necessary thickness of the belt and its total length. Take centrifugal force effect into consideration for density of belt being 950 kg/m3. [
A flange coupling has 6 bolts with a bolt circle diameter of 200 mm is used to connect the steam turbine to a 5 MW generator running at 3,600 rpm with an efficiency of 95 %. Find the force on each bolt that will cause it to shear. A. 23.27 kN B. 32.72 kN C. 27.53 kN D. 35.94 kN
Compute the minimum vine diameter to provide a desired factor of safety of 1.7 against yield-type failure. Assume a yield stress of 300 MPa, and that the mass of the monkey is 65 kg. Hint Weight (N) = Mass (Kg) X g (9.81 m/s2)
answer this ; The factors of safety predicted at point H by the maximum shear stress theory of failure (Tresca criterion)
Question 2 A load of 1.8 kN is hoisted by means of a rope on a lifting machine with a rotational frequency of 40 revolutions per min, and a drum whose diameter is 600 mm. Calculate the following: a) The power required for the load. b) Efficiency of the lifting machine, if an electric motor of 8kW is required to drive the lifting machine.