Example: Figure shows a curved surface LM, which is in the form of a quadrant of a circle of radius 3 m, immersed in the water. If the width of the gate is unity, calculate the horizontal and vertical components of the total force acting on the curved surface. Free water surface 1 m 3 m M Curved surface

Example: Figure shows a curved surface LM, which is in the form of a quadrant of a circle of radius 3 m, immersed in the water. If the width of the gate is unity, calculate the horizontal and vertical components of the total force acting on the curved surface. Free water surface 1 m 3 m M Curved surface

Name: Example: Figure shows a curved surface LM, which is in the form of a
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: Example: Figure shows a curved surface LM, which is in the form of a quadrant of a circleof radius 3 m, immersed in the water. If the width of the gate is unity, calculate the horizontaland vertical components of the total force acting on the curved

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter8: Centroids And Distributed Loads

Section: Chapter Questions

Problem 8.122P: The 12-ft wide quarter-circular gate AB is hinged at A. Determine the contact force between the gate...

See similar textbooks

Similar questions

Figure AB Cover rests on a flat surface. Cover 180 kg weight and 1.2 m wide. At what height is the water depth the lid won't open? find it. (glycerin density is 1260 kg/m3 , That density 1000 kg/m3 )
End D of a 2.5 long uniformly plain wooden rod( s.g=0.7) is held 0.3m below the surface of still water. (a.) How much of the rod remains above the water surface? (b.) if the rod diameter is 25mm what force of D is required to hold it in place ?
Consider a cubical water tank with a side length of 4 m. The tank is half filled with water, and is open to the atmosphere. Now, a truck carrying this tank is accelerated at a rate of 7 m/s^2 on a flat road. The maximum vertical rise (in meters) of free surface of the water is? only HANDWRITTEN answer needed ( NOT TYPED)
Please be clear with your solution. A Triangular gate having a horizontal base of 1.30 m and an altitude of 2 m is inclined 45o from the vertical with vertex pointing upward. The base of the gate is 2.70 m below the surface of oil (s = 0.80). What normal force must be applied at the vertex of the gate to open it? Show figure
The two sides of a V-shaped water trough are hinged to each other at the bottom where they meet, as shown, making an angle of 45° with the ground from both sides. Each side is 0.75 m wide, and the two parts are held together by a cable and turnbuckle placed every 6 m along the length of the trough. Calculate the tension in each cable when the trough is filled to the rim.
A circular plate of diameter 3 m is immersed in water in such a way that its least and greatest depth from the free surface of water are 1 m and 3 m respectively. For the front side of the plate, find (i) total force exerted by water and (ii) the position of centre of pressure.
A 6-m-high, 5-m-wide rectangular plate blocks the end of a 5-m-deep freshwater channel, as shown . The plate is hinged about a horizontal axis along its upper edge through a point A and is restrained from opening by a fixed ridge at point B. Using appropriate software, investigate the effect of water depth on the force exerted on the plate by the ridge. Let the water depth vary from 0 to 5 m in increments of 0.5 m. Tabulate and plot your results.
Consider the slanted plate AB of length L in Fig. .( a ) Is the hydrostatic force F on the plate equal to theweight of the missing water above the plate? If not, correctthis hypothesis. Neglect the atmosphere. ( b ) Can a “missingwater” theory be generalized to curved surfaces of this type?
A flat circular surface is submerged in water so that its flat surface is perpendicular to the free surface and the periphery is just below the surface as shown in the figure. The diameter of the circle (D) is 2.00 mm .Calculate the depth to the centre of pressure from the free surface.
A rectangular gate 1.4 m in base and 1.8 m high is placed on the face of the water reservoir, as shown in the figure. Its upper portion is hinged and the base is attached to a cylindrical buoy whose weight is 20 kg. The external diameter of the buoy is 2 m and the weight of the gate is 50 kg. The mechanism is such that the buoy will open the gate if water surface will rise higher than 4 m. What is the height of the buoy below the water surface?
EMERGENCY!!!! The cover in the figure is hinged at the center O and has a fixed width w = 5 m. The equation of the surface is x = y2 / a (a = 3 m), the depth of the water to the right of the lid (D = 4 m). If the weight of the lid is neglected, it is necessary to keep the lid in balance. Find the size of the force (Fa) required, as shown. Take the density of the water as 999 kg / m3.
The submerged sector gate AB shown in the figure is 1/9 of a circle of radius 4 m. The length of the gate is 10 m. Determine the horizontal component of water pressure acting on the gate.