Figurel: Layout of industrial gas compressor with an air receiver The given information is summarized in the table below for three different cases Given Parameters Case A Case B Case C Power delivered by the 20 kW 25 kW 30 kW electric motor into the compressor Mass flow rate of the air 0.3 kg 1 kg 0.5 kg drawn The receiver pressure Atmospheric temperature The temperature of the 30 °C air entering the receiver The temperature of the 15 °C air leaving the receiver Cooling water flows 12 bar gauge 13 bar gauge 15 bar gauge 20 °C 23 °C 25 °C 35 °C 40 °C 20 °C 25 °C 0.5 kg 0.7 kg 1 kg The temperatures of the 12 °C water at inlet 13 °C 15 °C

Figurel: Layout of industrial gas compressor with an air receiver The given information is summarized in the table below for three different cases Given Parameters Case A Case B Case C Power delivered by the 20 kW 25 kW 30 kW electric motor into the compressor Mass flow rate of the air 0.3 kg 1 kg 0.5 kg drawn The receiver pressure Atmospheric temperature The temperature of the 30 °C air entering the receiver The temperature of the 15 °C air leaving the receiver Cooling water flows 12 bar gauge 13 bar gauge 15 bar gauge 20 °C 23 °C 25 °C 35 °C 40 °C 20 °C 25 °C 0.5 kg 0.7 kg 1 kg The temperatures of the 12 °C water at inlet 13 °C 15 °C

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter44: Geothermal Heat Pumps

Section: Chapter Questions

Problem 12RQ: The function of the pressure tank in an open-loop, geo-thermal heat pump well system is to prevent...

See similar textbooks

Similar questions

A refrigeration system using R22 is to have a refrigerating capacity of 60 kW. The evaporating temperature is -5degC and condensing temperature of 35 deg-C. Determine the volume flow rate of the refrigerant at the inlet to the compressor, the power required by the compressor, and the fraction of vapor in the mixture at the entrance to the evaporator. Use the spreadsheet to solve this problem.
Design a hydrocooling unit that can cool fruits and vegetables from 30°C to 5°C at a rate of 20,000 kg/h under the following conditions: The unit will be of flood type that will cool the products as they are conveyed into the channel filled with water. The products will be dropped into the channel filled with water at one end and picked up at the other end. The channel can be as wide as 3 m and as high as 90 cm. The water is to be circulated and cooled by the evaporator section of a refrigeration system. The refrigerant temperature inside the coils is to be -2°C, and the water temperature is not to drop below 1°C and not to exceed 6°C. Assuming reasonable values for the average product density, specific heat, and porosity (the fraction of air volume in a box), recommend reasonable values for the quantities related to the thermal aspects of the hydrocooler, including (a) how long the fruits and vegetables need to remain in the channel, (b) the length of the channel, (c) the water…
A refrigeration system using R22 is to have a refrigerating capacity of 60 kW. The evaporating temperature is -50C and condensing temperature of 350C. Determine the volume flow rate of the refrigerant at the inlet to the compressor, the power required by the compressor, and the fraction of vapor in the mixture at the entrance to the evaporator. Use the spreadsheet to solve this problem.
In an ammonia refrigeration system, the pressure in the evaporator is 251 kPaa, and the ammonia at the evaporator entry is 0.1511 dry while at exit is 0.95 dryIf the rate of ammonia circulation is 4.56 kg / m * i * n , determine the refrigerating capacity of the system. Use the properties of ammonia from refrigerantstable
What are the consideration of the design outdoor conditoon and indoor condition when constructing a refrigeration and cryogenic plant for liquid oxygen production? Please input sources.
Does R134a suitable refrigerant in Cryogenic plant for liquid oxygen produduction? Explain, if not what did you recomment? R401A has been phased out.
1.) Determine the refrigerant name and chemical formula of R-22 2.) An ice plant produces 20 tons of ice per day at -15oC from water at 25 oC. If miscellaneous losses are 12 % of the freezing and chilling load, calculate the refrigeration capacity of the plant, in TR.
A 15-ton refrigeration system is used to make ice. The water is available at 20°C. Refrigerant12 is used with saturated temperature limits of -25°C and 54°C. Determine (a) the COP, (b) therefrigerant flow rate, (c) the temperature at discharge of the compressor, (d) the volume flowrate, and (e) the maximum kg of ice manufactured per day.
Show all elements of your design including an explanation of assumptions made and justify your design decisions for the problem: When heating up a cold stream (5000 kg/h water) from 40ᵒC to 90ᵒC while cooling down a hot stream (5000 kg/h water) from 110ᵒC to 60ᵒC in AES exchangers, how many shells do you need?
Consider the heating of water in a pan on a top of a range. If 24 kJ of heat is transferred to the water from heating element and 6 kJ of it is lost from the water to the surrounding air. Determine;(a) the net heat transfer to the water,(b) the efficiency for boiling water.
What are the design parameters for the various equipment and components (includes the table of specification) used in the refrigeration and cryogenic plant for liquid oxygen production? What are the considerations? What are the design assumptions?
Good Day , Am struggling with the two questions below , please assit Question 1 A solar-power-tower plant is considered for Dakar, Senegal. Heliostats with a total area of 80,000 m2 are to be used to reflect solar radiation into a receiver. When the solar irradiation is 950 W/m2, steam is produced at 2 MPa and 400°C at a rate of 20 kg/s. This steam is expanded in a turbine to 20 kPa pressure. The enthalpy at the exit of the turbine is 2484.5 kJ/kg.(a) Determine the power output and the thermal efficiency of the plant when the solar radiation is 950 W/m2.(b) How much electricity can be produced per year if the average thermal efficiency is 15 % and the generator efficiency is 96 %? Question 2 To reduce cooling electricity consumption in an industrial plant, it is proposed to install an absorption refrigeration system running on solar energy. The absorption system costs $300,000 and the operating and maintenance expenses are $8000 per year. It is estimated that this absorption system…