Find the length of the path of contact when a pinion with 18 teeth meshes with internally toothed gear with 22 teeth, when the pressure angle is 20°, the diametral pitch is 0.16 and the addendum of pinion and gear are 7 mm and 3 mm respectively.

Find the length of the path of contact when a pinion with 18 teeth meshes with internally toothed gear with 22 teeth, when the pressure angle is 20°, the diametral pitch is 0.16 and the addendum of pinion and gear are 7 mm and 3 mm respectively.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Related questions

Q: A simple gear train of 30 and 50 teeth for pinion and gear wheel respectively, is used to drive an…

Q: 2. A helical gear has a normal diametral pitch of 12. a nor- mal pressure angle of 20°, 48 teeth, a…

Q: pair of spur gear fitted on a motor shaft of lathe machine transmits the power of 7 kW at 600 rpm…

Q: Two equal spur gears of 48 teeth mesh together with pitch radii of 4.0 in. and addenda of 0.1670 in.…

A: Given data: T1=T2=48r1=r2=4 ina=0.1670 inϕ=14.5° Need to determine the length of action and contact…

Q: A simple gear train of 30 and 50 teeth for pinion and gear wheel respectively, is used to drive an…

Q: Calculate The angular speed of the gear wheel in rad/s

A: Relationship between no of teeth (T) and speed (N) is given by, Ng/Np = Tp/Tg so, Ng = (Np × Tp)/…

Q: Q Two involute gears having module 3 mm and pressure angle 20 mesh externally to give a velocity…

A: "Since you have posted a question with multiple sub-parts, we will solve the first three sub-parts…

Q: Two gears in mesh, their module is 5 mm, the numbers of teeth are 24 and 33, the pressure angle is…

A: Given Data: The value of the module is m = 5. The pressure angle is ϕ=21°. The number of teeth is t…

Q: pinion shaft of a machine transmits a torque of 66 Nm to the shaft of gear at a speed of 564 rpm,…

Q: Colegio de Muntinlupa fabricated a pair of spur gear 2.5 module (20° full depth involute tooth) and…

Q: spur gears, with a pinion module of 4 mm. The pressure angle is 25 degree. The number of teeth of…

Q: A simple gear train of 30 and 50 teeth for pinion and gear wheel respectively, is used to drive an…

Q: The particulars of a pair of spur gear are:- (a) gear ratio=(1/10), (b) center distance= 660 mm…

A: Spur Gear: The gears in which the teeth are parallel to the axis of the rotation of the shaft are…

Q: The number of teeth of a spHP is 30 and it rotates at 200 gear rpm. 1What will be its eireular pitch…

Q: The particulars of a pair of spur gear are:- (a) gear ratio=(1/10), (b) center distance=D 660 mm…

A: Let pitch radius of gear and pinion be 'R' and 'r' respectively and module of pinion/gear be…

Q: A simple gear train of 30 and 50 teeth for pinion and gear wheel respectively, is used to drive an…

Q: A pinion with known module and number of teeth rotates at 2400 rpm and drives a gear at 800…

Q: A pinion and gear with module 5 mm has a speed reduction ratio of 6 : 1. If centre distance is 420…

A: Rp+Rg= 420.......(i) m=2×R/z.......(ii) Zg/Zp= 6......(iii)

Q: 160 rpm ccw about the center of gear 1, which is fixed. 1) Predict the speed of the gear 2. 2)…

Q: A simple gear train of 30 and 50 teeth for pinion and gear wheel respectively, is used to drive an…

A: Since you have posted a question with multiple sub-parts, we will solve the first three subparts for…

Q: A 17-tooth spur pinion has a diametral pitch of 8 teeth/in, runs at 1120 rev/min, and drives a gear…

A: Given data: The number of teeth on pinion is Tp = 17. The diametral pitch is Pd = 8 teeth/in. The…

Q: A gear system consisting of a pinion and an internally toothed wheel is shown in Figure 3.1. The…

A: Given: The number of tooth on pinion, Zp = 21 The module, m = 5 mm The pressure angle, α = 20° The…

Q: A simple gear train of 30 and 50 teeth for pinion and gear wheel respectively, is used to drive an…

Q: Q) Two mating gears have 20 and 40 involute teeth of module 10 mm and 20° pressure angle. If the…

A: An involute gear is a type of gear having an involute shaped teeth profile similar. This shape aids…

Q: A 84-tooth gear is driven by a 17-tooth spur pinion. The diametral pitch is 32 teeth/in and the…

Q: 18. A wormgear set has a single-thread worm with a pitch diameter of 1.250 in, a diametral pitch of…

A: WORMGEARING DATA FROM PROB. 8-52:To=924 LB.IN.) MG-30rem FORCES: W+G=Wxw = To / (06/2) = 924 28-IN.…

Q: simple gear train of 30 and 50 teeth for pinion and gear wheel respectively, is used to drive an…

Q: Chain 8A having a pitch of 12.7 mm is used to connect 5 KW, 1400 rpm motor to a drilling machine.…

Q: :- Find the length of path of contact when a pinion with 18 teeth meshes with an internally toothed…

Q: 1. Two equal gear wheels of 180 mm pitch circle radius and module of 6 are in mesh. The teeth are of…

Q: A straight tooth spur pinion has a 19 tooth pinion rotating at a speed of 1640 rpm. The driven gear…

Q: A pair of spur gear fitted on a motor shaft of lathe machine transmits the power of 7 kW at 600 rpm…

A: Given Data P=7 kW Np=600 rpm Zp=22 Zg=72 m=8 mm

Q: Q6:- A pinion having 20 involute teeth of module 6 mm rotates at 200 rpm and transmits 1.5 kW to a…

Q: Two mating involute spur gear of 20° pressure angle have a gear ratio of 2. The number of teeth on…

A: Given:Pressure angle=20°=φGear ratio=G=2Number of teeth on the pinion=t=20Speed of pinion=N1=250…

Q: A simple gear train of 30 and 50 teeth for pinion and gear wheel respectively, is used to drive an…

Q: A straight tooth spur pinion has a 19 tooth pinion rotating at a speed of 1640 rpm. The driven gear…

A: We havem=DT2.5=D19D=47.5mmNow let P=Diametrical PitchP=TDP=1947.5P=0.4

Q: The following data refer to two meshing involute gears of 20° pressure angle: Number of teeth on…

Q: A pinion having 40 teeth is meshing with a spur gear having 80 teeth. The profile of the gear is…

A: For gear Radius, D=TG×m=80×12=960 mmR=480 mm Addendum circle radius…

Q: A simple gear train of 30 and 50 teeth for pinion and gear wheel respectively, is used to drive an…

A: Given: TP=30TG=50m= 3 mmϕ= 14.5°vmax=5 m/sN=800 rpm

Q: A pinion of 28 teeth meshes with a wheel of 40 teeth such that the pressure angle is 20°. The module…

Q: As for a gear mechanism, if the contact ratio ea=1.35, which means that while operating, there are %…

A: Given data: The contact ratio for gear mechanism is 1.35

Q: Compute and choose the nearest value of minimum number of teeth to be cut on the pinion in order to…

A: no of teeth (t) = 2sin2(θ) = 2sin2(14.5) = 32 no of teeth

Q: A pinion shaft of a machine transmits a torque of 42 Nm to the shaft of gear at a speed of 578 rpm,…

Q: A simple gear train of 30 and 50 teeth for pinion and gear wheel respectively, is used to drive an…

Q: An epicyclic gear train is shown in the figure. The number of degrees of freedom possible for this…

A: A gear train is a mechanical system produced by putting gears on a frame such that the teeth of…

Q: pinion shaft of a machine transmits a torque of 68 Nm to the shaft of gear at a speed of 574 rpm,…

Q: The maximum sliding velocity of the teeth of two gear wheels in mesh is 0.32 m/s. The wheels are of…

A: Given: The maximum sliding velocity of teeth, v = 0.32 m/s The module of wheels, m = 5 mm The number…

Q: Provide readable penmanship of step by step manual solution, given, and drawing for below given…

Q: Q2:- A pinion having 20 involute teeth of module 6 mm rotates at 200 rpm and transmits 2hp to a gear…

A: Given:- A pinion involute 20 m = 6 mm N= 200 rpm…

Concept explainers

Power Transmission Elements

It is defined as the energy transfer from one location to another location. The energy will start moving from the energy generation source to the energy applied position to obtain the work output. From this method, a large amount of electric energy moves from the power station to various electrical substations.

Question

Problem 3
Find the length of the path of contact when a pinion with 18 teeth meshes with
internally toothed gear with 22 teeth, when the pressure angle is 20°, the
diametral pitch is 0.16 and the addendum of pinion and gear are 7 mm and 3 mm
respectively.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Design of Power Transmission Elements and Power Transmission Systems

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

Colegio de Muntinlupa fabricated a pair of spur gear 2.5 module (20° full depth involute tooth) and to be mounted on shafts with a centerline distance of 90 mm. The speed ratio required is 3:1. Determine the following: a. Pitch diameter of pinionb. Pitch diameter of gearc. Number of teeth of piniond. Number of teeth of geare. Circular pitch of pinionf. Circular pitch of gearg. Addendumh. Dedendumi. Clearancej. Whole depthk. Working Depthl. Backlashm. Tooth thicknessn. Tooth space widtho. Outside diameter of pinionp. Outside diameter of gearq. Root diameter of pinionr. Root diameter of gears. Base diameter of piniont. Base diameter of gear
A pinion and gear with module 5 mm has a speed reduction ratio of 6 : 1. If centre distance is 420 mm, number of teeth on the pinion is _________ .
A 17-tooth pinion meshes with an 84-tooth gear. The full-depth involute gear teeth have 20°pressure angle and a diametral pitch of 32. Determine the base pitch and the contact ratio.Also,calculate the addendum, dedendum, circular pitch, tooth thickness, and the base diameterfor the pinion and gear. If the center distance is increased by 0.125 in., what are the newvaluesfor the contact ratio and the pressure angle.
A 84-tooth gear is driven by a 17-tooth spur pinion. The diametral pitch is 32 teeth/in and the pressure angle is 20, the length of action is equal to
Two equal spur gears of 48 teeth mesh together with pitch radii of 4.0 in. and addenda of 0.1670in. If the pressure angle is 14 1⁄2 deg, calculate the length of action and contact ratio.
A pair of spur gear fitted on a motor shaft of lathe machine transmits the power of 7 kW at 600 rpm which is input at pinion gear and its shaft rotates in the counter-clockwise direction. The number of teeth on the pinion and the gear are 22 and 72 respectively, while the module is 8 mm. Assume a pressure angle of 200. Calculate: i) Torque on the shaft of the pinion in Nm. ii) Torque on the shaft of the gear in Nm. iii) Gear ratio iv) Center distance between shafts in mm
A simple gear train of 30 and 50 teeth for pinion and gear wheel respectively, is used to drive an electric wheelchair at a velocity that is double the maximum velocity of slip. The pinion has an equal addendum as the gear wheel, a module of 3 mm, and a pressure angle of 14.5o. The wheelchair has a maximum velocity of 5 m/s when its pinion rotates at 800 r.p.m. Calculate: 1.The length of a path of a recess in mm.2. The addendum of the gears in mm.
A simple gear train of 30 and 50 teeth for pinion and gear wheel respectively, is used to drive an electric wheelchair at a velocity that is double the maximum velocity of slip. The pinion has an equal addendum as the gear wheel, a module of 3 mm, and a pressure angle of 14.5o. The wheelchair has a maximum velocity of 5 m/s when its pinion rotates at 800 r.p.m. Calculate The length of a path of a recess in mm.
A simple gear train of 30 and 50 teeth for pinion and gear wheel respectively, is used to drive an electric wheelchair at a velocity that is double the maximum velocity of slip. The pinion has an equal addendum as the gear wheel, a module of 3 mm, and a pressure angle of 14.5o. The wheelchair has a maximum velocity of 5 m/s when its pinion rotates at 800 r.p.m. Calculate The angular speed of the gear wheel in rad/s
A simple gear train of 30 and 50 teeth for pinion and gear wheel respectively, is used to drive an electric wheelchair at a velocity that is double the maximum velocity slip. The pinion has an equal addendum as the gear wheel, a module of 3 mm, and a pressure angle of 14,5. The wheelchair has a maximum velocity of 5 m/s when it's pinion rotates at 800 rpm. Calculate : 1.1)The magnitude of the velocity of slip of gears in mesh 1.2)The angular speed of the gear wheel in rad/s 1.3)The maximum length of a path of the approach in mm 1.4)The length of a path of a recess in mm. 1.5) The addendum of the gears in mm. 1.6) The contact ratio
A 4 module, 20◦ pinion of 36 teeth drives a gear of 72 teeth. a. Calculate the length of action and contact ratio if the gears in mesh with zero backlash.b. If the center distance is increased 0.8mm,calculate the radii of the operating circles, operating pressure angles and backlash produced.c. Check if interference occurs
A simple gear train of 30 and 50 teeth for pinion and gear wheel respectively, is used to drive an electric wheelchair at a velocity that is double the maximum velocity of slip. The pinion has an equal addendum as the gear wheel, a module of 3 mm, and a pressure angle of 14.5o. The wheelchair has a maximum velocity of 5 m/s when its pinion rotates at 800 r.p.m. Calculate The magnitude of the velocity of slip of gears in mesh.