I need the answer as soon as possible For combined cycle, which statement is incorrectSelect oneO a Heat utilization in combustor isn't optimum by energetically or exergeticaly and is limited by three factorsThe temperature of flue gas at the end of waste heat boiler is mitedC. The waste heat boiler has limited heat transfer aread.The physical properties of the water and exhaust gases cause energetic and exergetic lossese the temperature difference between exhaust gas and steam through the waste heat boiker ismt constant

Given Combined cycle To find Statement which is wrong

For combined cycle, which statement is incorrect Select one O a Heat utilization in combustor isn't optimum by energetically or exergetically and is imited by three factors Ob. The temperature of flue gas at the end of waste heat boiler is imited OC The waste heat boiler has limited heat transfer area The physical properties of the water and exhaust gases cause energetic and exergetic losses O e the temperature difference between exhaust gas and steam through the waste heat boiler isnt constant

For combined cycle, which statement is incorrect Select one O a Heat utilization in combustor isn't optimum by energetically or exergetically and is imited by three factors Ob. The temperature of flue gas at the end of waste heat boiler is imited OC The waste heat boiler has limited heat transfer area The physical properties of the water and exhaust gases cause energetic and exergetic losses O e the temperature difference between exhaust gas and steam through the waste heat boiler isnt constant

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Air enters the compressor of a regenerative gas-turbine engine at 100 kPaand 300 K and is compressed to 800 kPa. The regenerator has aneffectiveness of 65 percent, and the air enters the turbine at 1200 K. For acompressor efficiency of 75 percent and a turbine efficiency of 86 percent,determine(a) The heat transfer in the regenerator.(b) The back work ratio.(c) The cycle thermal efficiency
A spark ignition engine that operates on Otto cycle has a compression ratio of 10. At the beginning of the compression process, air is at 100 kPa and 25 C. 750 kJ/kg of heat is transferred to air duringthe constant-volume heat-addition process. Consider the variation of specific heats with temperature. (g) determine the net-work output, the thermal efficiency, and the mean effective pressure forthe cycle.
Which is more efficient reheat regenerative cycle or the regenerative cycle? Why?
It is proposed to design and develop a Rankine cycle Steam Power Plant in which steam at 80 barand 500 oCis supplied to the turbine which exhausts at a pressure of 0.11 bar into a condenser. Condensate from the condenser is returned to Steam Generator (Boiler) by a Feedwater Pump. The processes in the turbine and pump can be assumed to be reversible adiabatic. In addition, pressure and temperature drops can be neglected throughout the cycle. Sketch the T-s diagram for this cycle and calculate the following performance parameters:i) Cycle Thermal Efficiency ii) Work Ratioiii) Specific Steam Consumptioniv) Condenser Heat Loadv) Mass flow rate of steam to generate a net power output of 40 Megawatts (MW).vi) Mass flow rate of cooling water required for the condenser if the cooling water inlettemperature is 26 oC and its outlet temperature is limited to 40 oC. The specific heat capacityof the cooling water is 4.18 kJ/kg K.viii) The total amount of sensible heat in kW supplied to the…
A steady-state gas turbine is using air as the working fluid has shaft power output of 55 MW. Air enters the turbine at 300 K and leaves at 600 K and 30 m/s. The air is first compressed by adding a compression power of 15 MW. Then air receives 173 MW as heat input from the combustor. Determine the mass flow rate of air in kg/s.
A basic Rankine steam power plant uses an adiabatic turbine that operates with inlet steam at 6.80 MPa and 550.0 ∘C.The exhaust steam enters the condenser at 50.0 ∘C with a quality of 0.960. Saturated liquid water leaves the isobaric condenser and is pumped to the boiler. Mass flow through the cycle is 2.900 kg/s. Neglecting pump work and kinetic and potential energy changes, determine: the work interaction term of the turbine: the thermal efficiency of the cycle, ?th:
A basic Rankine steam power plant uses an adiabatic turbine that operates with inlet steam at 6.80 MPa and 550.0 ∘C. The exhaust steam enters the condenser at 50.0 ∘C with a quality of 0.960. Saturated liquid water leaves the isobaric condenser and is pumped to the boiler. Mass flow through the cycle is 2.900 kg/s. Neglecting pump work and kinetic and potential energy changes, determine: the work interaction term of the turbine: the thermal efficiency of the cycle, ?th: the second law efficiency of the turbine, ?2nd:
In refrigeration process, a region is cooled and the temperature was maintained at -15oC. The cooling water used in the refrigeration is 25oC. If the refrigerant is HFC-134a, and the heat transfer temperature difference is 10oC, Calculate COP (ω) and mass flowrate for a vapor-compression cycle if the rating of the refrigeration process is 100,000 kJ/h and the efficiency of the compression is 0.75.
An Otto cycle begins its compression at 94kPa, 1230cm^3 and 11degC. The dispalacement volume and maximum temperature within the cycle is 1090cm^3 and 920degC and respectively. Utilizing air standard assumptions, determine the: a. thermal efficiency (%)b. mean effective pressure (kPa). Consider the cycle as a model of the process in each cylinder of a spark-ignition engine. c. Net power output (kW) if the engine has four cylinders and the cycle is repeated 1200 times per minute in each cylinder Show the T-s and P-v diagrams when solving. Note that specific heats are not constant
The turbine of a steam power plant operating on a simple ideal Rankine cycle produces 500 kW of power when the boiler is operated at 3.5 MPa, the condenser at 40 kPa, and the temperature at the turbine entrance is 650oC. Determine: (a)the rate of heat supply in the boiler, (b)the rate of heat rejection in the condenser, and (c)the thermal efficiency of the cycle. Answers: (a) 1458 kW, (b) 958 kW, (c) 0.343
1. Consider a steam power plant that operates on a simple ideal Rankine cycle and has a net power output of45 MW. Steam enters the turbine at 7 MPa and 500°C and iscooled in the condenser at a pressure of 10 kPa by runningcooling water from a lake through the tubes of the condenserat a rate of 2000 kg/s. Show the cycle on a T-s diagram withrespect to saturation lines, and determine (a) the thermal efficiency of the cycle, (b) the mass flow rate of the steam, and(c) the temperature rise of the cooling water. Answers:(a) 38.9 percent, (b) 36 kg/s, (c) 8.4°C 2. Consider a 210-MW steam power plant that operateson a simple ideal Rankine cycle. Steam enters the turbine at10 MPa and 500°C and is cooled in the condenser at a pressure of 10 kPa. Show the cycle on a T-s diagram with respectto saturation lines, and determine (a) the quality of the steamat the turbine exit, (b) the thermal efficiency of the cycle,and (c) the mass flow rate of the steam. Answers: (a) 0.793,(b) 40.2 percent, (c) 165…
A. Calculate the thermal efficiency of a Rankine cycle in which the steam is initially dry saturated at 2 Mpa and the condenser pressure 7kN/m². Express this efficiency as a percentage of a Carnot cycle efficiency of the same limits of temperature. B. If the steam leaves the boiler at 350°C with the same pressure of the boiler and condenser given above. Explain why the Rankine efficiency in (A) is less than in (B), and why the ratio of efficiencies of the respective Rankine and Carnot is grater.