For the figure below, Rod BC is made of A-36 steel and has a diameter of 50 mm. Determine the following: (a) The elastic elongation (in mm) of rod BC. ( (b) The decrease in diameter (in mm) of rod BC. ( 200 KN 100 kN 1.5 m 1m

For the figure below, Rod BC is made of A-36 steel and has a diameter of 50 mm. Determine the following: (a) The elastic elongation (in mm) of rod BC. ( (b) The decrease in diameter (in mm) of rod BC. ( 200 KN 100 kN 1.5 m 1m

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter2: Axially Loaded Members

Section: Chapter Questions

Problem 2.2.7P: Rigid bar ACB is supported by an elastic circular strut DC having an outer diameter of 15 in. and...

See similar textbooks

Related questions

Q: A bar made of A-36 steel has the dimensions shown in Figure. If an axial force of P = 80 kN is…

Q: Determine the torsion from the following figure. The torsional moment varies in the form of a…

A: here, Tortiona is torque due t(x). here, from the t(x) graph. we can say that, at x=0 t=0 and slope…

Q: Steel L= 4m Aluminum L= 3m A= 300 mm? E= 200 GPa A= 500 mm? | E= 70 GPa A 3.5 m 2.5 m

Q: As an engineer in a construction company, you are assigned a new job which is to design a solid,…

A: We will take aluminium 6061 -T6 alloy , Young modulus E= 69 GPa, allowable bending stress= 250 MPa,…

Q: The rigid beam supports the load of 50 kN as in the figure below. Determine the displacement at B.…

A: As per given question The rigid beam supports the load of 50 kN as in the figure below. Determine…

Q: Rigid bar BC is supported by aluminum rod (1) and bronze rod (2), as shown in the figure. Aluminum…

Q: Determine the minimum column length to allow elastic torsion. Cross section is given in Figure 5, as…

A: It is required to determine the y coordinate of centroid.

Q: In the figure, the length L = 500 cm and the profile section is given, one end of which is fixed and…

A: Given data :- L = 500 m Yield stress = 300 daN/cm2 n= 0.25 Le = 2L E = 2100000 daN/cm2 Find :-…

Q: 1. The bar ABC is supported by a pin at A and a steel wire at B. Calculate the elongation of the…

Q: B D F 0.5 m E G 0.2 m 0.3 m 0.3 m tP=90 kN

A: NOTE:- As per our company guidelines we are supposed to answer only first 3 sub-parts. Kindly repost…

Q: A bar ABC of length L consists of two parts of equal lengths but different diameters. Segment AB has…

Q: 1-A solid axial member which is made from three parts with different materials (sections 1 and 3) is…

A: I have used the first row for the values of youngs modulus. NOTE: According to Bartleyby's policy we…

Q: A vertical steel bar shown in figure Q1 is subjected to a compressive load of 75 kN. If the stress…

A: Given data: F=75 kNδ=0.04 mmE=200 GN/m2 Need to determine the cross-sectional dimensions and length…

Q: A compound bar consisting of bronze, aluminum, and steel segments is loaded axially as shown in the…

Q: Determine the total deformation of the steel rod shown in figure under the given loads. Take the…

Q: 3. PROBLEM In the Figure shown, determine the deformation At B and C as required by a load P = 20…

A: To find : find the deformation of at B and C . Given : load P=20 kN E=70 GPa area A=900mm2 lenght…

Q: A steel bar with diameter d1 = 10 mm has upset ends with diameter d2 = 15 mm. The lengths of the bar…

A: Given that, d1=10 mm,d2=15 mm,L1=0.3 m,L2=0.15 m,R=1.25 mm,E=90 GPa,δ=0.5 mm,

Q: A uniform bar AB weighing 500 kg is supported at both end by cable as shown in the figure below.…

Q: A 3mm thick hollow polystyrene cylinder (E = 3 GPa) and a rigid circular plate (only part of which…

Q: In the Figure shown, the rigid beam with negligible mass was horizontal before the load P was…

A: Given, As = 600 mm2Es = 200 GPa = 200,000 N/mm2Ls = 2 m = 2000 mmAa = 900 mm2Ea = 70 GPa = 70,000…

Q: A bar ABC length L consists of two parts of equal lengths but different diameters.Segment AB has…

A: Given: P=110 kN shortening of the bar = 0.8 mm (a)Maximum allowable diameter (b) distance b from…

Q: steel cab AB has a cross sectional area of 400 mm^2, modulus of elasticity=200 GPa, and a Length of…

Q: A circular column is made of concrete [E. = 4.2(10³)ksi] while being reinforced with six steel rods…

A: I have attached my answer below, please refer and give me +ve rating, Thanks!

Q: Q For the assembly shown in the figure, brass rod AE (E=105 GPa) and aluminum rod BF (Ea=70 GPa)…

Q: The horizontal member shown in the figure is loaded by 25 kN at E. It is supported by steel…

A: Permissible stress is stress, which produces due to pressure or forces which does not exceed the…

Q: A solid uniform brick is placed on a sheet of wood.When one end of the sheet is raised (see…

Q: 2. Two steel cables support an applied load of 100 kN as shown in the figure below. Determine the…

A: Given-Data:- P=100KN To- Find:- a) The deformation of member AC and BC b)The vertical and horizontal…

Q: a machine mass m = 500 kg is mounted on a simply supported steel beam of length l = 2 that has a…

Q: 50. An open coil helical spring is made of wire 10 mm diameter. It has 15 coils of mean coil…

A: We have an open coil helical spring with a wire diameter of 10 mm. It features 15 coils with a coil…

Q: The figure shown below

A: The cross-sectional area of the bars is Consider the diagram shown below for the beam ACE, Taking…

Q: 1.5 Figure 1.9 shows a circular steel rod of length 40 m and diameter 8 mm, which hangs in a mine…

Q: 2. The cross-sectional dimensions of a structural steel column, which serves as the central support…

Q: A steel bar 160cm long under applied loading as shown in figure 4.Find the elongation of bar,take…

Q: 3. The figure shows an aluminum bar CE (aluminum alloy 2014-T6) of cross-sectional area Aa = 130 mm?…

A: The area of the CE is: A=130 mm2 The modulus of elasticity is: E=73×109 Pa The moment at B is…

Q: Link BD, shown in Figure 1, has a circular cross section of 10 mm diameter, and is made of a steel…

A: Consider FBD of link ABC as shown below ,

Q: A rectangular bar of length L has a slot in the central half of its length. The bar has width b,…

Q: The aluminum bar ABC has a cross-sectional area of 20 mm2 is supported by a pin at A and a steel…

A: Given that, Cross-section of aluminum bar, A=20 mm2Force applied at C, P=50 kN,Cross-sectional area…

Q: 1. A steel bar of cross section 500 mm is acted upon by the forces shown in the figure. Determine…

Q: Figure Q3 shows a steel bar of diameter 16 mm and length 600 mm subjected to axial forces If E =…

Q: A steel bar with diameter d1 = 10 mm has upset ends with diameter d2 = 15 mm. The lengths of the bar…

Q: Problem 3. A circular cylindrical shaft composed of three materials is subjected to axial loads of P…

Q: H.W 1 A6 m long hollow bar of circular section has 140 mm diameter for a length of 4 m, while it has…

Q: A metal rod, as shown in the following figure, axial loads are applied at position indicated.…

A: Given, A1 = A2 = A3 = 100 mm2 E1 = E2 = E3 = 84 x 103 N/mm2 L1 = 500 mm L2 = 600 mm L3 = 900 mm…

Q: 2. Two steel cables support an applied load of 100 kN as shown in the figure below. Determine the…

A: Given-Data:- Load=100KN To-Find:- a) The deformation of member AC and BC b) The vertical and…

Q: A compression member constructed from steel rod (E = 200 GPa, v = 0.25) has outside diameter of 82…

A: Given data diameter of rod (d) = 82 mm ∆d = 0.0087 mm E = 200 GPa v = 0.25 Material behave…

Q: Assume portion ABC of the rod is made of steel (Ee= 200 GPa , v=0.3) and portion CD is made of…

Q: 1-A solid axial member which is made from three parts with different materials (sections 1,2, and 3)…

A: Section 1 Diameter, D1 = 30 mmSection 2 Diameter , D2 = 20 mmSection 3 Diameter, D3 = 25 mm

Q: The beam shown in the figure is made of steel with oal=300 MPa. Determine the maximum load, P, that…

A: According to the given information, we have a beam which is shown in the figure, the stress in steel…

Concept explainers

Axial Load

When a bar of the uniform cross-section is acted by a load, such that the load acts along the longitudinal axis of the bar, such kinds of loadings are known as axial loadings. In general terms, a load is an external force acting on a component. An axial load acts perpendicular to the geometric cross-section of the component. Based on the direction of the application of the load, an axial load can be tensile or compressive. The analysis of bodies under the action of axial loads is generally studied under the branch of mechanics, known as statics.

Question

For the figure below, Rod BC is made of A-36 steel and has a
diameter of 50 mm. Determine the following:
(a) The elastic elongation (in mm) of rod BC. (
(b) The decrease in diameter (in mm) of rod BC.
200 kN 100 kN
1.5 m

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

A two-story building has steel columns AB in the first floor and BC in the second floor, as shown in the figure. The roof load P:equals 400 KN, and the second-floor load P-, equals 720 kN. Each column has a length L = 3.75 m. The cross-sectional areas of the first- and second-floor columns are 11,000 mm" and 3900 mm", respectively. (a) Assuming that E = 206 GPa. determine the total shortenings aof the two columns due to the combined action of the loads Ptand P,. (b) How much additional load P0can be placed at t he top of t he column (point C) if t he total shortening: SACis not to exceed 4.0 mm?
The rails of a railroad track are welded together at their ends (to form continuous rails and thus eliminate the clacking sound of the wheels) when the temperature is 60°F. What compressive stress ?? =6.5×10-6 /? is produced in the rails when they are heated by the sun to 120"F if the coefficient of thermal expansion a = the modulus of elasticity E = 30 × 106 psi?
A prismatic bar in tension has a length L = 2.0 m and cross-sectional area A =249 mn2. The material of the bar has the stress-strain curve shown in the figure. Determi ne t he elongation 5 of the bar for each of the following axial loads: P = 10 kN, 20 kN, 30 kN, 40 kN. and 45 kN. From these results, plot a diagram of load P versus elongation 5 (load-displacement diagram).
A steel cable with a nominal diameter of 25 mm (see Table 2-1) is used in a construction yard to lift a bridge section weighing 38 kN. as shown in the figure. The cable has an effective modulus of elasticity E = 140 GPa. (a) If the cable is 14 m long, how much will it stretch when the load is picked up? (b) If the cable is rated for a maximum load of 70 kN, that is the factor of safety with respect to failure of the cable?
A tie-down on the deck of a sailboat consists of a bent bar boiled at both ends, as shown in the figure. The diameter dBof the bar is 1/4 in., the diameter D Wof the washers is 7/8 in., and the thickness is of the fiberglass deck is 3/8 in. If the allowable shear stress in the fiberglass is 300 psi, and the allowable bearing pressure between the washer and the fiberglass is 550 psi, what is the allowable load P allowon the tie-down?
A round bar of 10 mm diameter is made of aluminum alloy 7075-T6 (see figure). When the bar is stretched by axial forces P, its diameter decreases by 0.0 16 mm. Find the magnitude of the load P. Obtain the material properties from Appendix 1.
*16 A prismatic bar AB of length L, cross-sectional area A, modulus of elasticity E, and weight Changs vertically under its own weight (see figure). (a) Derive a formula for the downward displacement Scof point E. located at distance It from the lower end of the bar. (b) What is the elongation SBof the entire bar? (c) What is the ratio £ of the elongation, of the upper half of the bar to the elongation of the lower half of the bar? (d) If bar A B is a riser pipe hanging from a drill rig at sea. what is the total elongation of the pipe? Let L = 1500 m, A - 0.ol57 m2, and E = 210 GPa. See Appendix 1 for weight densities of steel and sea water. (See Probs. 1.4-2 and J.7-13 for additional figures.)
Rigid bar ACB is supported by an elastic circular strut DC having an outer diameter of 15 in. and inner diameter of 14.4 in. The strut is made of steel with a modulus elasticity of E = 29,000 ksi. Point load P = 5 kips is applied at B. Calculate the change in length of the circular strut DC. What is the vertical displacement of the rigid bar at point B?
A metal bar AB of a weight Ills suspended by a system of steel wires arranged as shown in the figure. The diameter of the wires is 5/64 in., and the yield stress of the steel is 65 ksi. Determine the maximum permissible weight W max for a factor of safety of 1.9 with respect to yielding.
A prismatic bar of length L = 1.8 m and cross-sectional area A = 480 mm" is loaded by forces P{= 30 kN and A = 60 kN (see figure) The bar is constructed of magnesium alloy having a stress-strain curve described by the Ram berg-Osgood equation: 45.000 618 UW id which u has units of mega pascals (MPa). (a) Calculate the displacement 8t- of the end of the bar when the load P:acts alone. (b) Calculate the displacement when the load P, acts alone. (c) Calculate the displacement when both loads act simultaneously.
A vertical bar is loaded with axial loads at points B, C, and D. as shown in the figure. The bar is made of steel with a modulus of elasticity E = 29,000 ksi., The bar has a cross-sectional area of 8.24 in2. Calculate the displacements at points B, C, and D. Ignore the weight of the bar
A steel pad supporting heavy machinery rests on Four short, hollow, cast iron piers (see figure). The ultimate strength of the cast iron in compression in 50 ksi. The outer diameter of the piers is d = 4.5 in, and the wall thickness is t = 0.40 in. Using a factor of safety of 3.5 with respect to the ultimate strength, determine the total load P that can be supported by the pad.