For the production of part R-193, two operations are being considered. The capital investment associated witheach operation is identical.Operation 1 produces 2,100 parts per hour. After each hour, the tooling must be adjusted by the machineoperator. This adjustment takes 15 minutes. The machine operator for Operation 1 is paid $24 per hour (thisincludes fringe benefits).Operation 2 produces 2,350 parts per hour, but the tooling needs to be adjusted by the operator only onceevery two hours. This adjustment takes 45 minutes. The machine operator for Operation 2 is paid $13 perhour (this includes fringe benefits).Assume an 8-hour workday. Further assume that all parts produced can be sold for $0.35 each.a. Should Operation 1 or Operation 2 be recommended?b. What is the basic tradeoff in this problem?

Answered: For the production of part R-193, two…

Practical Management Science

6th Edition

ISBN:9781337406659

Author:WINSTON, Wayne L.

Publisher:WINSTON, Wayne L.

Chapter2: Introduction To Spreadsheet Modeling

Section: Chapter Questions

Problem 20P: Julie James is opening a lemonade stand. She believes the fixed cost per week of running the stand...

See similar textbooks

Similar questions

The Tesla Model S, one of the most sought-after luxury cars, is produced in Tesla’s Freemont factory in California. The production process can be broken up into the following subprocesses. Stamping: In the stamping process, coils of aluminum are unwound, cut into level pieces of sheet metal, and then inserted into stamping presses that shape the metal according to the geometry of the Model S. The presses can shape a sheet of metal in roughly 6 seconds. Subassembly: The various pieces of metal are put together using a combination of joining techniques,including welding and adhesion. This creates the body of the vehicle.Paint: The body of the vehicle is then moved to the paint shop. After painting is completed, the body moves through a 350° oven to cure the paint, followed by a sanding operation that ensures a clean surface. General assembly: After painting, the vehicle body is moved to the final assembly area. Here, assembly workers and assembly robots insert the various subassemblies,…
United Research Associates (URA) had received a contract to produce two units of a new cruise missile guidance control. The first unit took 4,000 hours to complete and cost $30,000 in materials and equipment usage. The second took 3,200 hours and cost $21,000 in materials and equipment usage. Labor cost is charged at $18 per hour.The prime contractor has now approached URA and asked to submit a bid for the cost of producing another 20 guidance controls.a. What will the last unit cost to build?b. What will be the average time for the 20 missile guidance controls?c. What will the average cost be for guidance control for the 20 in the contract?
United Research Associates (URA) had received a contract to produce two units of a new cruise missile guidance control. The first unit took 4,000 hours to complete and colos $30,000 in materials and equipment usage. The second took 3,200 hours and cost $21,000 in materials and equipment usage. Labor cost is charged at $18 per hour The prime contractor has now approached URA and asked to submit a bid for the cost of producing another 20 guidance controls. a. What will the last unit cost to build? b. What will be the average time for the 20 missile guidance controls? C. What will the average cost be for guidance control for the 20 in the contract?
A recurring maintenance job in a factory is being done by a three-man crew. Due to the nature of the job and space limitations, it was observed that two of the men were idle 37% of the time; one of the men was also idle an additional of the time, and at any given time only one man was required. The men were each paid P24.00 per hour. Each time the job was performed a set of tools and equipment with a value equivalent to P36.00 per hour was used. If the three-men crew could complete the work in 5 hours, which crew size would be the most economical
3.Consider the following three-stage production process of glass ceramics. The process is experiencing severe quality problems related to insufficiently trained workers. Specifically, 20 percent of the parts going through operation 1 are badly processed by the operator. Rather than scrapping the unit, it is moved to a highly skilled rework operator, who can correct the mistake and finish up the unit completely within 15 minutes. The same problem occurs at station 2, where 10 percent of the parts are badly processed, requiring 10 minutes of rework. Station 3 also has a 10 percent ratio of badly processed parts, each of them requiring 5 minutes by the rework operator. a)What is the utilization of station 2 if work is released into the process at a rate of 5 units per hour? b)Where in the process is the bottleneck? Why? (Remember, the bottleneck is the resource with the lowest capacity, independent of demand.)
Data Products, Inc., packages and distributes a variety ofpersonal computer-related products. A time study hasbeen conducted for a job packaging 3.5-inch personalcomputer diskettes for shipment to customers. The jobrequires a packager to place 20 diskettes in a rectangularplastic bag, close the bag with a twist tie, and place thefilled bag into a bin, which is replaced by another workerwhen it is filled. The job can be broken into four basic elements. The elemental times (in minutes) were ob-tained from the time study for 10 job cycles shown in the following table. a. Using an allowance factor of 16%, determine the stan-dard time for this job. b. Determine the number of cycles for this time studysuch that the company would be 95% confident that theaverage time from the time study is within 4% of thetrue average cycle time.
A process has seven elements composed of combination of worker and machine. Elements A, B, D, and F are worker-controlled while elements C and E are machine controlled. Element G is a worker-controlled irregular element performed every five cycles Machines are idle during elements A, D, and G. Two units are produced every cycle. Below are the observed time (in minutes) and performance rating of each element. Work Element Observed Time (in minutes) Performance Rating A 0.75 115% B 1.20 120% C 1.40 N.A. D 1.05 90% E 1.25 N.A. F 1.20 105% G 1.60 85% Worker's allowance is 20% a) Determine Normal Time . Answer in 4 decimal placesb) What is the standard time? Round up answer in 2 decimal places.c) If the worker's performance during actual production is 125% on all manual elements for seven hours worked on an eight-hour shift, how many units will be produced? Round up answer in integer value.d) Determine the worker's efficiency (in percentage). Answer in 2 decimal places
William Beebe owns a small shoe store. He has 10 pairs of shoes that requireresoling and polishing. He has a machine that can resole one pair of shoes at atime, and the time required for the operation varies with the type and condition of theshoe and the type of sole that is used. Shoes are polished on a machine dedi-cated tothis purpose as well, and polishing is always done after resoling. His assistant generally does the polishing while Mr. Beebe does the resoling. The resoling and polishingtimes (in minutes) are Shoes Resoling Time Polishing Time1 14 32 28 13 12 24 6 55 10 106 14 67 4 128 25 89 15 510 10 5In what order should the shoes be repaired in order to minimize the total makespanfor these 10 jobs?
Charles Lackey operates a bakery in Idaho Falls, Idaho. Because of its excellent product and excellent location, demand has increased by 25% in the last year. On far too many occasions, customers have not been able to purchase the bread of their choice. Because of this size of the store, no new ovens can be added. At a staff meeting, one employee suggested ways to load the ovens differently so that more loaves of bread can be baked at one time. This new process will requrie that the ovens be, loaded by hand, requiring additional manpower. This is the only production change that will be made in order to meet the increased demand. The bakery currently makes 1,600 loaves per month. Employees are paid $8 per hour. In addition to the labor cost, Charles also has a constant utility cost per month of $700 and a per loaf ingredient cost of $0.50. Current multifactor productivity for 640 work hours per month= .242 loaves/dollar (round your response to three decimal places). After increasing…
Three professors are grading a combined final exam. Each is grading different questions on the test. One professor requires three minutes to finish her portion, a second takes six minutes, and the third takes two minutes. Assume that there is no learning curve effect. a) What will be their hourly output? b) If there are 45 tests to grade, how long will the grading take? c) If each professor were to grade the exams separately in 18 minutes, how long would it take to grade the 45 tests? How long if another professor (who also required 18 minutes) joined them? d) If another professor pitches in just to help the second professor in the original arrangement, how long will it take the four of them to grade the tests? e) If a fifth professor offers to help, what might happen?
Three professors are grading a combined final exam. Each is grading different questions on the test. One professor requires three minutes to finish her portion, a second takes six minutes, and the third takes two minutes. Assume that there is no learning curve effect. a) What will be their hourly output? b) If there are 45 tests to grade, how long will the grading take? c) If each professor were to grade the exams separately in 18 minutes, how long would it take to grade the 45 tests? How long if another professor (who also required 18 minutes) joined them? d) If another professor pitches in just to help the second professor in the original arrangement, how long will it take the four of them to grade the tests? e) If a fifth professor offers to help, what might happen? *Need answers for parts d and e only*
Nurses stations are a three step process. First is check in which has a mean of 5 minutes. The second is the waiting room which has a mean of 3 minutes and the final is the patient room with a mean of 7 minutes. Assume that these have an exponential processing time. a. How much worse are the CT and TH of the exponential case from the "best case" at critical WIP on a percentage basis. b. At what value of WIP will average TH from the exponential line be 80% of that for the "best case" line.

SEE MORE QUESTIONS

Recommended textbooks for you

Practical Management Science

Operations Management

ISBN:

9781337406659

Author:

WINSTON, Wayne L.

Publisher:

Cengage,

Operations Management

ISBN:

9781259667473

Author:

William J Stevenson

Publisher:

McGraw-Hill Education

Operations and Supply Chain Management (Mcgraw-hi…

Operations Management

ISBN:

9781259666100

Author:

F. Robert Jacobs, Richard B Chase

Publisher:

McGraw-Hill Education

Practical Management Science

Operations Management

ISBN:

9781337406659

Author:

WINSTON, Wayne L.

Publisher:

Cengage,

Operations Management

ISBN:

9781259667473

Author:

William J Stevenson

Publisher:

McGraw-Hill Education

Operations and Supply Chain Management (Mcgraw-hi…

Operations Management

ISBN:

9781259666100

Author:

F. Robert Jacobs, Richard B Chase

Publisher:

McGraw-Hill Education

Business in Action

Operations Management

ISBN:

9780135198100

Author:

BOVEE

Publisher:

PEARSON CO

Purchasing and Supply Chain Management

Operations Management

ISBN:

9781285869681

Author:

Robert M. Monczka, Robert B. Handfield, Larry C. Giunipero, James L. Patterson

Publisher:

Cengage Learning

Production and Operations Analysis, Seventh Editi…

Operations Management

ISBN:

9781478623069

Author:

Steven Nahmias, Tava Lennon Olsen

Publisher:

Waveland Press, Inc.

SEE MORE TEXTBOOKS