From the following data, solve for the degree of compaction. If this is for Item 201, Aggregate Base Course, will it pass the specification? Field density test data: Weight of material taken from hole, kg. = Weight of sand to fill hole, kg. = 5.585 3.935 Volume of hole, cu.m = Wet unit weight, kg/cu.m = Dry unit weight, kg/cu.m = 0.0028 1995 1734 Laboratory Data: Maximum dry density, kg/cu.m. = 1750 Optimum Moisture Content, % = 8.00

From the following data, solve for the degree of compaction. If this is for Item 201, Aggregate Base Course, will it pass the specification? Field density test data: Weight of material taken from hole, kg. = Weight of sand to fill hole, kg. = 5.585 3.935 Volume of hole, cu.m = Wet unit weight, kg/cu.m = Dry unit weight, kg/cu.m = 0.0028 1995 1734 Laboratory Data: Maximum dry density, kg/cu.m. = 1750 Optimum Moisture Content, % = 8.00

Fundamentals of Geotechnical Engineering (MindTap Course List)

5th Edition

ISBN:9781305635180

Author:Braja M. Das, Nagaratnam Sivakugan

Publisher:Braja M. Das, Nagaratnam Sivakugan

Chapter5: Soil Compaction

Section: Chapter Questions

Problem 5.2P

See similar textbooks

Similar questions

The ff are results of a field unit weight determination test Volume hole 0.0016 Mass of moist soil from 3.10kg Water content 12.20% Mas dry 19.50 Determine the relative compaction in %
The following results are obtained from standard compaction test for a soil, if Gs = 2.5 Water Content (%) 6.2 8.1 9.8 11.5 12.3 13.2 Unit weight (kN/m3) 16.9 18.7 19.5 20.5 20.4 20.1 Required: 1- The optimum water content (Wc %) 2- The maximum dry unit weight ( dry ) 3- The void ratio (e) 4- Degree of saturation (S %) 5- Find the weight of water needed to be added to 1 m3 to reach 100% saturation.
Which of the following are standard procedures used for determining the field unit weight of compaction?I. Sand Cone MethodII. Rubber Balloon MethodIII. Nuclear MethodIV. Falling Head Test Method
Explain how dry unit weight is related to relative compaction, and how it is determined.
find the following: a. What is the value of the percent passing for sieve with 2 mm. opening in percentage? b. What is the value of the percent passing for sieve with 150 μm. opening in percentage? c. What is the value of the Effective Size of soil in mm.? d. What is the value of the coefficient of gradation?e.What is the value of the coefficient of uniformity? f. What are the percentages of gravel, sand, and Fines using the limits indicated by USCS? g. What are the percentages of gravel, sand, silt and clay using the limits indicated by MIT? h. What are the percentages of gravel, sand, silt and clay using the limits indicated by AASHTO? i. What are the percentages of gravel, sand, silt and clay using the limits indicated by USDA?
The following property is used to investigate the quality of compaction.
Calculate the coefficient of gradation, Cc. ? Classify the soil by AASHTO and USCS system. (LL = 30, PL = 10) ? Use this given M=Mass of soil retained in pan +∑Mass reatianed in each sieve⇒M=617 gM=Mass of soil retained in pan +∑Mass reatianed in each sieve⇒M=617 g Sieve No. Opening Size (mm) Mass retained (g) %Mass retained=MiM×100=MiM×100 %Cumulative mass retained % Finer 4 4.750 28 =28617×100%=4.54%=28617×100%=4.54% 4.54 95.46 10 2.0 42 =42617×100%=6.81%=42617×100%=6.81% 11.35 88.65 20 0.850 48 =48617×100%=7.78%=48617×100%=7.78% 19.13 80.87 40 0.425 128 =128617×100%=20.74%=128617×100%=20.74% 39.87 60.13 60 0.250 221 =221617×100%=35.82%=221617×100%=35.82% 75.69 24.31 100 0.150 86 =86617×100%=13.94%=86617×100%=13.94% 89.63 10.37 200 0.075 40 =40617×100%=6.48%=40617×100%=6.48% 96.11 3.89 Pan 24 =24617×100%=3.89%=24617×100%=3.89% 100 0 Now, to plot the GSD curve, the % finer is kept on the vertical axis and the opening size are kept on the horizontal axis -…
8 The following are results of a field unit weight determination test using sand cone method: Volume of hole = 0.0019 m3 Mass of moist soil from hole = 3.24 kg Water content = 12.01% Max. dry unit weight from a laboratory compaction test = 19.70 kN/m3 Determine the relative compaction, in percent. Round off to two decimal places. Hint: Relative compaction = Field dry unit weight / Max dry unit weight (lab)
A sand cone in place unit test was conducted on the field during the construction of the embanklment in CALAX. The following data were obtained in the field: Moisture content of soil from the test hole+ 12.8% ; Weight of sand to fill the funnel(cone) = 320g; Weight of weight soil from the test hole= 750g; Unit weight of sand= 15.4 kN/m3 and Weight of sand used to fill the test hole and thefunnel of sand-cone device=870 g. Compute for the relative compaction (in percent) in the field if the maximum dry unit weight of the soil is 21.30 kN/m3. a. 94 b. 90 c. 88 d. 92
A sand cone in place unit test was conducted on the field during the construction of the embanklment in CALAX. The following data were obtained in the field: Moisture content of soil from the test hole+ 12.8% ; Weight of sand to fill the funnel(cone) = 320g; Weight of weight soil from the test hole= 750g; Unit weight of sand= 15.4 kN/m3 and Weight of sand used to fill the test hole and thefunnel of sand-cone device=870 g. Compute for the relative compaction (in percent) in the field if the maximum dry unit weight of the soil is 21.30 kN/m3.
A sand cone in place unit test was conducted on the field during the construction of the embanklment in CALAX. The following data were obtained in the field: Moisture content of soil from the test hole+ 12.8% ; Weight of sand to fill the funnel(cone) = 320g; Weight of weight soil from the test hole= 750g; Unit weight of sand= 15.4 kN/m3 and Weight of sand used to fill the test hole and thefunnel of sand-cone device=870 g. Compute for the relative compaction (in percent) in the field if the maximum dry unit weight of the soil is 21.30 kN/m3. a.94 b.88 c.92 d.90 With FBD if necessary
A modified Proctor compaction test was carried out using a cylindrical moldwith a 1000 ml volume. Table 2 summarizes the results. a. Plot the compaction and ZAV curves (RD=2.75 and ρwater=1000 kg/m3)b. Determine the maximum dry density and the optimum moisture content Table 2 Moisture Content (%)Mass of WetSample (g)10.5 2033.211.8 2146.613.0 2203.514.9 2183.116.4 2147.617.6 2116.8