hollow steel shaft, 6 ft long, has an outer diameter of 3 in. and an inner dieter of 1.5 in. The shaft is transmitting 200 hp at 120 rev/min. Determine (a) the maximum shear stress in the shaft; and (b) the angle of twist in degrees. Use G = 12 x 106 psi

hollow steel shaft, 6 ft long, has an outer diameter of 3 in. and an inner dieter of 1.5 in. The shaft is transmitting 200 hp at 120 rev/min. Determine (a) the maximum shear stress in the shaft; and (b) the angle of twist in degrees. Use G = 12 x 106 psi

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter3: Torsion

Section: Chapter Questions

Problem 3.11.3P: A thin-walled aluminum tube of rectangular cross section (sec fig me) has a centerline dimensions b...

See similar textbooks

Related questions

Q: as a diameter of 2 in. and a thickness of 0.20 in. Disk B is supplied with 15 hp of power of which A…

Q: Determine the dimensions of a hollow shaft with a diameter ratio of 3:4 which is to transmit 60 kW…

A: Given information: Hollow shaft with diameter ratio 3:4That is Inside DiameterOutside Diameter =…

Q: A hollow aluminum propeller shaft, 30 ft. Ilong with 15 in. outer diameter and an inner diameter…

A: (a) The maximum shear stress, τmax = 3.8 ksi. (b) The angle of twist of the shaft, θmax = 0.052…

Q: Example 10.10 A hollow circular shaft with the ratio of internal and external diameters of 0.6 is…

Q: A solid circular shaft transmits 75 kW power at 200 rpm. Calculate the diameter of the shaft and the…

A: Given: Power transmitted by the shaft P=75kWSpeed of the shaft N=200rpmModulus of rigidity…

Q: A tubular steel shaft transmits a power of P = 450 hp at a speed of 3000 rpm. Determine the maximum…

Q: solid circular shaft rotates at 200 rpm and transmits power of 112 kW. Calculate the minimum…

A: Given, Rotational speed of shaft = N = 200 rpm Power transmitted = P = 112 kW = 112,000 W Allowable…

Q: The propellers of a ship are connected to an A-36 steel shaft that is 60 m long and has an outer…

A: Torque is written as, Polar moment of inertia of shaft is written as,

Q: QUESTION 2 In Figure 2, the shaft is made of a solid A992 steel at section AB (rs = 25 mm),…

Q: A 5 ft long solid SAE4340 OQT1000 steel shaft is required to transmit a power of 180 HP. The shaft…

A: Given: Length of the shaft (L)=5ft Power (P)=180HP Shaft speed (N)=3000rpm or 2π×300060=314.159rad/s…

Q: A hollow shaft transmits 9 MW at 300 rev/min. It is supposed that the maximum allowable stress is…

A: Given: The power transmitted by the shaft is P=9 MW. The maximum allowable shear stress is ζ=70…

Q: A hollow shaft for marine applications has outer and inner diameters of 400 mm and 200 mm…

Q: A solid stainless steel [G = 93 GPa] shaft that is 2 m long will be subjected to a pure torque of T…

Q: A solid shaft in a rolling mill transmits 20 kW at 2 revolutions per second. The length of the shaft…

Q: The internal loadings at a critical section along the steel drive shaft of a ship are calculated to…

A: Given data: The torque, T = 2300 lb-ft. The bending moment, M = 1500 lb-ft. The axial trust, P =…

Q: A solid steel shaft ABCDE turns freely in bearings at points A and E. The shaft is driven by the…

Q: B) A wind turbine with an electrical generator rated at 200 k W output. The low speed shaft rotates…

Q: A hollow shaft transmits 7 MW at 200 rev/min. It is supposed that the maximum allowable stress is…

A: Given, P=7 MW=7×106 WN=200 RPMτ=70 MN/m2=70×106 N/m2G=80 GN/m2=80×109 N/m2θL=0.40/m=0.4×π180…

Q: Torsion Problem 6.0 A solid steel shaft is to transmit 5 hp from the motor to which it is attached.…

Q: (Q1 A hollow shaft has to transmit 6 MW at 150 rev/min. The maximum allowabl て 180 L=1 stress is not…

Q: A solid steel shaft ABCDE turns freely in bearings at points A and E. The shaft is driven by the…

Q: (a) A steel transmission shaft is 510 mm long and 50 mm external diameter. For part of its length it…

A: We can consider this case as shafts in series Both parts are subjected to the same torque We know…

Q: A hollow shaft for marine applications has outer and inner diameters of 400 mm and 200 mm…

A: Given: The outer diameter of shaft, D = 400 mm = 0.4 m The inner diameter of shaft, d = 200 mm = 0.2…

Q: Design a hollow shaft required to transmit 11.2 MW at a speed of 300 r.p.m. The maximum shear stress…

Q: Problem 10.2. A stepped steel shaft with diameters d, = 56 mm and d = 52 mm is twisted by torques T1…

A: d1 = 56 mm d2 = 52 mm T1 = 2.5 kN.m T2 = 1.5 kN.m

Q: The motor supplies 11.1 kW at 19.9 Hz at A. The bearings shown permit free rotation of the shafts.…

Q: Consider the case of shafts when subjected to axial loads in addition to combined torsional and…

Q: A solid circular shaft of diameter 100 mm is subjected to an axial stress of 50 MPa. It is further…

A: Given, Diameter of shaft = d = 100 mm Axial stress = σa = 50 MPa Torque = T = 10 kNm = 10 x 106 Nmm…

Q: Select the size of a hollow steel shaft necessary to transmit 150 hp at 250 rpm without exceeding an…

A: Given data, Power=150hp speed=250 rpm shear stress=4.7ksi angle of twist =0.35°…

Q: A solid steel shaft ABC with diameter d = 40 mm is driven at A by a motor that transmits 75 kW to…

Q: A solid steel shaft ABC with diameter d =40 mm is driven at A by a motor that transmits 75 kW to the…

Q: A steel shaft with a diameter 1.95 inches and length 4.35 feet transmits 80 HP from an electric…

A: Given dataDiameter = d= 1.95 incheslength = 4.35 feetAllowable shear stress = τallow = 8600…

Q: A hollow shaft for marine applications has outer and inner diameters of 400 mm and 200 mm…

Q: A solid circular shaft transmits torque T= 500 Nm. Knowing that L= 300 mm, Dị = 300 mm, D2 = 250 mm…

A: giventransmitted torque T=500NmL=300mmdiameter of pulley B D1=300mmdiameter of pulley C…

Q: tubular steel [G = 80 GPa] shaft is being designed to transmit 150 kW at 30 Hz. The maximum shear…

Q: A SOLID circular shaft transmits 50 horsepower while operating at a rate of 150 rev/min. If the…

Q: The shaft below is made of A992 steel and has an allowable shear stress of tadm = 75 MPa. When the…

A: Given: The allowable shear stress, τ = 75 MPa The speed of the shaft, N = 300 rpm The power of the…

Q: Q3.An electric motor is connected to a turbine with the help of a hollow shaft. The hollow shaft has…

Q: 7.9 A solid steel shaft of 200 mm diameter transmits 5 MW at 500 rev/min. It is proposed to alter…

Q: be designed for a marine engine delivering 1200 kW when running at 120 r/min. The maximum allowable…

A: Hi and thanks for the questions. Since you have asked multiple questions, as per our honour code, we…

Q: solid steel shaft has a diameter of d and a length of L had used to transmit a power of 120 kW at…

Q: A compound shaft consists of brass segment (1) and aluminum segment (2). Segment (1) is a solid…

Q: A solid circular shaft has a diameter of d mm and is made from steel, which fail when tested in…

A: Given:Syt=150 MPaM=22.2 KN.mT=44.4 KN.m

Q: A tubular steel shaft transmits a power of P = 450 hp at a speed of 3000 rpm. Determine the maximum…

A: Given data: P=450 hp=335565 WattN=3000 rpmD=2.25 int=0.150 in Need to determine the torque, polar…

Q: Consider two steel shafts CFG and HJ of diameters 50 mm and 70 mm respectively as shown in fig. The…

Q: A circular-closed-tube shaft, with an outer radius of 20 mm and an inner radius of 15 mm, and 650 mm…

Q: A composite shaft is comprised of an inner solid steel shaft 1/6 ft in diameter slipped over with a…

Concept explainers

Design of Shafts and Shaft Components

The shaft is basically defined as the machine element that rotates, is in circular cross-section, it is majorly used to transfer the power from one part of the system to another, or from a power generating machine to a power absorbing machine. The shaft is supported on bearings and is rotated with the help of a set of gears or pulleys that are used for the power transmission. Bending moment, torsion, and an axial force act upon the shaft. Designing of shaft primarily involves determining stresses at a critical point in the shaft that is arising due to loading.

Question

A hollow steel shaft, 6 ft long, has an outer diameter of 3 in. and an inner dieter of 1.5 in. The shaft is transmitting 200 hp at 120 rev/min. Determine (a) the
maximum shear stress in the shaft; and (b) the angle of twist in degrees. Use G =
12 x 106 psi for steel.

complete solution

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

What is the maximum power that can be delivered by a hollow propeller shaft (outside diameter 50 mm, inside diameter 40 mm, and shear modulus of elasticity 80 GPa) turning at 600 rpm if the allowable shear stress is 100 MPa and the allowable rate of twist is 3.0°/m?
A propeller shaft for a small yacht is made of a solid steel bar 104 mm in diameter. The allowable stress in shear is 48 MPa, and the allowable rate of twist is 2.0° in 3.5 meters. (a) Assuming that the shear modulus of elasticity is G = 80 GPa, determine the maximum torque that can be applied to the shaft. (b) Repeat part (a) if the shaft is now hollow with an inner diameter of 5d18. Compare values to corresponding values from part (a).
The stepped shaft shown in the figure is required to transmit 600 kW of power at 400 rpm. The shaft has a full quarter-circular fillet, and the smaller diameter D1= 100 mm. If the allowable shear stress at the stress concentration is 100 MPa, at what diameter will this stress be reached? Is this diameter an upper or a lower limit on the value of D2?
A motor driving a solid circular steel shaft with diameter d = 1.5 in, transmits 50 hp to a gear at B, The allowable shear stress in the steel is 6000 psi. Calculate the required speed of rotation (number of revolutions per minute) so that the shear stress in the shaft does not exceed the allowable limit.
A thin-walled rectangular tube has uniform thickness t and dimensions a x b to the median line of the cross section (see figure). How does the shear stress in the tube vary with the ratio = a/b if the total length Lmof the median line of the cross section and the torque T remain constant? From your results, show that the shear stress is smallest when the tube is square (ß = 1).
A thin-walled aluminum tube of rectangular cross section (sec fig me) has a centerline dimensions b = 6.0 in. and b = 4.0 in. The wall thickness t is constant and equal to 0.25 in. Determine the shear stress in the tube due to a torque T = 15 kip-in. Determine the angle of twist (in degrees) if the length L of the tube is 50 in. and the shear modulus G is 4.0 x 106 psi.
A stepped shaft ACB having solid circular cross sections with two different diameters is held against rotation at the ends (sec figure). If the allowable shear stress in the shaft is 6000 psi, what is the maximum torque (T0) that may be applied at section C? Find (T0)max if the maximum angle of twist is limited to 0.55º. Let G = 10,600 ksi.
A hollow steel shaft, 6 ft long, has an outer diameter of 3 in. and an inner diameter of 1.5 in. The shaft is transmitting 200 hp at 120 rev/min. Determine (a) themaximum shear stress in the shaft; and (b) the angle of twist in degrees. Use G =12 x 106 psi for steel
tubular steel [G = 80 GPa] shaft is being designed to transmit 150 kW at 30 Hz. The maximum shear stress in the shaft must not exceed 80 MPa and the angle of twist is not to exceed 6° in a 4-m length. Determine the minimum permissible outside diameter if the ratio of the inside diameter to the outside diameter is 0.80.
A solid circular shaft transmits 75 kW power at 200 rpm. Calculatethe diameter of the shaft and the maximum shear stress acting on it,if the twist in the shaft is not exceeding 1 º in 2 m length of the shaft.Take modulus of rigidity as 102 GPa.
Determine the minimum diameter that can be used for a solid circular steel shaft which is limited to an allowable shear stress of 70 MPa and a maximum angle of twist of 1.5o (degrees) per meter length. Applied maximum torque is 25 KN-m and the overall shaft length is 1.25 meters. Shear modulus = G= 80 GPa Note: When using torsion stress formulas, you must convert the angle of twist from degrees to radians.
Determine the diameter of a solid steel shaft which will transmit 112.5 kW at 200 rpm. Also determine the length of the shaft if the twist must not exceed 1.5o over the entire length. The maximum shear stress is limited to 55 N/mm2. Take the value of modulus of rigidity = 8 x 104 N/mm2.