In a 4 pole DC shunt generator with a shunt field resistance of 100 ohms and an armature resistance of 1 ohm has 378 wave connected conductors in its armature. The flux per pole is 0.02 Wb. If a load resistance of 10 ohms is connected across the load terminals and the generator is driven at 1000 rpm, calculate the power absorbed by the load.

In a 4 pole DC shunt generator with a shunt field resistance of 100 ohms and an armature resistance of 1 ohm has 378 wave connected conductors in its armature. The flux per pole is 0.02 Wb. If a load resistance of 10 ohms is connected across the load terminals and the generator is driven at 1000 rpm, calculate the power absorbed by the load.

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter11: Transient Stability

Section: Chapter Questions

Problem 11.3P

See similar textbooks

Similar questions

A 4 pole dc shunt generator with a shunt field resistance of 100 ohm and an armature resistance of 1 ohm has 378 wave connected conductor in its armature. the flux per pole is 0.02wb, if the load resistance of 10 ohm is connexted across the aemature terminal and the generator driven at 1000rpm, calculate the power obsorbed by load
A shunt generator has an output of 22 kW at a terminal voltage of 220 V. armature and shunt field resistances are 0.05 ohm and 44 ohms, respectively. If the copper loss is equal to the core, friction and windage losses at this load, the over-all efficiency of this generator is nearest to
The armature of a 6-pole separately excited dc generator is triplex wave wound with 534 conductors. This machine delivers power to the load at 200V while being driven at 900rpm. At this load, the armature circuit dissipates 640W. If the flux of this generator is 180-mWb, determine the kW rating of the load served. Assume a total brush drop of 2V.
7) The flux per pole of a four-pole generator is 0.05 wb. It driven at a speed of 1500 rpm. In order to have an induced emf of 20 v per conductor, , if the winding is lap-connected, find (a) the number of conductors in series in each parallel path, (b) the number of conductors between brushes to generate 240 v, and (c) the total number of conductors in the armature.
A long-shunt, four pole, 1500-W, 250-V, duplex wave-wound DC compound generator with the rated speed of 500 r.p.m., has a shunt field resistance of 100 Ω, a series field resistance of 0.05 Ω and an armature resistance of 0.2 Ω. If the flux per pole is 48.798 mWb and a total of 620 conductors, calculate the following: (a) the generated voltage, (b) the field currents, (c) the power generated in the armature.
A 4 pole ,d.c. shunt generator with a shunt field resistance of 50 ohm ,and armature resistance of 1 ohm ,has 400 lap connected conductors in its armature .the flux per pole is 20 mWb, calculate the power absorbed by a load of 10 ohm connected across the armature terminals ,when the generator is driven at 900 r.p.m.
PUT THE EQUATION Given a progressive 2-layer simplex lap winding for a 4-pole dc generator having 20 slots and 20 commutator segments, determine the following and input it on the text field provided. determine: a.Coil Pitch, Ys b.Commutator Pitch, Yc, Back Pitch, YB d. Front Pitch, YB, No. of Parallel Paths
Q2: A500 kW, 500 V, 10 poles d.c generator has lap wound armature Find the electrical angle shift of brushes when AT4 / pole = 208 AT. If the ATC for same generator when connected as wave wound is 2600 AT when the brushes on G.N.A.
please answer in bond paper 3. A long-shunt, four pole, 1500-W, 250-V, duplex wave-wound DC compound generator with the rated speed of 500 r.p.m., has a shunt field resistance of 100 Ω, a series field resistance of 0.05 Ω and an armature resistance of 0.2 Ω. If the flux per pole is 48.798 mWb and a total of 620 conductors, calculate the following: (a) the generated voltage, (b) the field currents, (c) the power generated in the armature.
A short shunt compound DC generator supplies a load current of 10A at a voltage of 10 volts. If the resistance of armature, shunt field and series field windings are 0.001 ohm, 1 ohm 0.00 ohm respectively. c) write down the factors to improve the generated voltage.
A short shunt compound DC generator supplies a load current of 10A at a voltage of 10 volts. If the resistance of armature, shunt field and series field windings are 0.001 ohm, 1 ohm 0.00 ohm respectively. a) Draw the the figure. And find the generated voltage.
A separately-excited DC generator with magnetization curve shown below (Figure 1) is driven by a prime mover at 1500 rpm. The armature resistance is 0.1 ohms. A. What is the internal generated voltage of this generator if VF = 15 Vdc and RF = 2.44 Ω (combined field winding resistance and variable resistance)? B. If this generator is connected to a 100 ohm resistor load, what is the load current in amperes? Note that the armature has a resistance and will be in series with the load. (Answer in 3 decimal places)