In a community event, a game of 'water resistance' is played by a group of people. Considering a stream of water jet shooting out of a water hose with a diameter of 50 cm. The water exits the hose at a velocity of 10 m/s and impact on a flat metal plate placed vertically at a normal angle to the water. Assume the density of water to be at 1000 kg/m³. Plae Fadulta Dws 1. Determine the force exerted by the water jet on the metal plate 2. If there are two adults standing behind the metal plate, holding the plate at an angle of 20° below horizontal level and the force exerted by the adults on the plate is at 300N, measure the magnitude and direction of the resultant force. Will the adults able to move towards the water jet and not pushed backwards by the water jet?

In a community event, a game of 'water resistance' is played by a group of people. Considering a stream of water jet shooting out of a water hose with a diameter of 50 cm. The water exits the hose at a velocity of 10 m/s and impact on a flat metal plate placed vertically at a normal angle to the water. Assume the density of water to be at 1000 kg/m³. Plae Fadulta Dws 1. Determine the force exerted by the water jet on the metal plate 2. If there are two adults standing behind the metal plate, holding the plate at an angle of 20° below horizontal level and the force exerted by the adults on the plate is at 300N, measure the magnitude and direction of the resultant force. Will the adults able to move towards the water jet and not pushed backwards by the water jet?

Name: In a community event, a game of 'water resistance' is played by a gro
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: In a community event, a game of 'water resistance' is played by a group of people. Consideringa stream of water jet shooting out of a water hose with a diameter of 50 cm. The water exitsthe hose at a velocity of 10 m/s and impact on a flat metal pla

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A hydroelectric power plant uses Pelton-type turbines, in which multiple nozzles are used to accelerate the waterwhich is directed onto the turbine blades, which are exposed to an atmospheric pressure of 101.325 kPa. The water enters the nozzles with an absolute pressure of 500 kPa and a speed of 5 m/s, and the nozzle outlets are exposed to atmospheric pressure and have an internal diameter of 5 cm. Consider that the specific mass of water is 1,000 kg/m3. Determine the mass flow rate of water through each of the nozzles, and explain why the actual mass flow rate will be lower.
A 60-kg ice skater is standing on ice with ice skates (negligible friction). She is holding a flexible hose (essentially weightless) that directs a 2-cm-diameter stream of water horizontally parallel to her skates. The water velocity at the hose outlet is 10 m/s relative to the skater. If she is initially standing still, determine (a) the velocity of the skater and the distance she travels in 5 s and (b) how long it will take to move 5 m and the velocity at that moment.
A water jet strikes a moving plate at velocity of 10 m/s as the plate moves at a velocity of2 m/s. The diameter of the water jet is 12cm. Determine:a) The force needed to hold the plate in its place,b) The work done per second and the efficiency.
Water @ 30C and 1atm is flows at a rate of 0.5 m^3/s through a horizontal junction in a pipe. The water exit at the discharge end into the atmosphere. If internal d at the entrance of the junction is 0.3m, while at the exit the d is 0.15m calculate for the resultant force in the junction.
Water flowing in a pipe reaches a point where the cross-sectional area of the pipe is reduced to 1/3 of its previous value. If the speed of the water before the constriction is 1.31 m/s, what is the speed of the water after the constriction?
A reducing elbow is used to deflect water flow at 25 L/s in a horizontal pipe upward by an angle of=45° from the flow direction while accelerating it. The elbow discharges water into the atmosphere. The diameter of the elbow is 15 cm at the inlet and 5 cm at the exit. The elevation difference between the center of the exit and inlet is 40 cm. The mass of the elbow and the water in it is 40 kg. Determine the anchoring force needed to hold the elbow in place, assuming a momentum-flux correction factor of 1.03.
A jet issued of water at the rate of 200 L/s and a velocity of 36 m/s strikes a blade moving in the same direction at 15 m/s. The deflection angle of the blade is 120o. Neglecting friction, determine: (a) the x- and y-components of the force exerted by the jet on the blade in N.; (b) the work done by the jet on the blade, in joules.
A reducing elbow is used to deflect water flow at a rate of 95 kg/s in a horizontal pipe upward 45° while accelerating it (Figure below). The elbow discharges water into the atmosphere (ρ= 1000 kg/m3). The crosssectional area of the elbow is 113 cm2 at the inlet and 7 cm2 at the outlet. The elevation difference between the centers of the outlet and the inlet is 30 cm. The weight of the elbow and the water in it is considered to be negligible. Determine(a) the gage pressure at the center of the inlet of the elbow and (b) the anchoring force FRZ needed to hold the elbow in place.
Water flowing in a horizontal 25-cm-diameter pipe at 8 m/s and 300 kPa gage enters a 90° bend reducing section, which connects to a 15-cm-diameter vertical pipe. The inlet of the bend is 50 cm above the exit. Neglecting any frictional and gravitational effects, determine the net resultant force exerted on the reducer by the water. Take the momentum-flux correction factor to be 1.04.
A tank with openings 1, 2, and 3 is moving to left at a speed of 25 km/h. Knowing that D1 = D2 = 20 cm and D3 = 10 cm, find the volume flow rate at each opening. Assume a frictionless incompressible flow. Air velocity far from the tank is assumed to be zero
The impeller of a centrifugal blower has a radius of 15 cm and a blade width of 6.1 cm at the inlet, and a radius of 30 cm and a blade width of 3.4 cm at the outlet. The blower delivers atmospheric air at 20°C and 95 kPa. Disre- garding any losses and assuming the tangential components of air velocity at the inlet and the outlet to be equal to the impeller velocity at respective locations, determine the volu- metric flow rate of air when the rotational speed of the shaft is 800 rpm and the power consumption of the blower is 120 W. Also determine the normal components of velocity at the inlet and outlet of the impeller.
What do you notice about the total momentum before and the total momentum after? Which principle are you demonstrating here? State it. Discuss what is meant by an isolated system and how it is related to the law of conservation of momentum.