In Figure (a), two identical rectangular rods of metal are welded end to end, with a temperature of T1 = 5°C on the left side and a temperature of T2 = 129°C on the right side. In 3.7 min, 27 J is conducted at a constant rate from the right side to the left side. How much time would be required to conduct 27 Jif the rods were welded side to side as in Figure (b)? (a) T2 (b) Number i Units

In Figure (a), two identical rectangular rods of metal are welded end to end, with a temperature of T1 = 5°C on the left side and a temperature of T2 = 129°C on the right side. In 3.7 min, 27 J is conducted at a constant rate from the right side to the left side. How much time would be required to conduct 27 Jif the rods were welded side to side as in Figure (b)? (a) T2 (b) Number i Units

Principles of Physics: A Calculus-Based Text

5th Edition

ISBN:9781133104261

Author:Raymond A. Serway, John W. Jewett

Publisher:Raymond A. Serway, John W. Jewett

Chapter16: Temperature And The Kinetic Theory Of Gases

Section: Chapter Questions

Problem 1OQ

See similar textbooks

Similar questions

Two concrete spans that form a bridge of length L are placed end to end so that no room is allowed for expansion (Fig. P16.63a). If a temperature increase of T occurs, what is the height y to which the spans rise when they buckle (Fig. P16.63b)?
An aluminum rod 0.500 m in length and with a cross-sectional area of 2.50 cm2 is inserted into a thermally insulated vessel containing liquid helium at 4.20 K. The rod is initially at 300 K. (a) If one-half of the rod is inserted into the helium, how many liters of helium boil off by the time the inserted half cools to 4.20 K? Assume the upper half does not yet cool. (b) If the circular surface of the upper end of the rod is maintained at 300 K, what is the approximate boil-off rate of liquid helium in liters per second after the lower half has reached 4.20 K? (Aluminum has thermal conductivity of 3 100 W/m K at 4.20 K; ignore its temperature variation. The density of liquid helium is 125 kg/m3.)
For a temperature increase of 10 at constant volume, what is the heat absorbed by (a) 3.0 mol of a dilute monatomic gas; (b) 0.50 mol of a dilute diatomic gas; and (c) 15 mol of a dilute polyatomic gas?
In Figure (a), two identical rectangular rods of metal are welded end to end, with a temperature of T1 = 0.6°C on the left side and a temperature of T2 = 113°C on the right side. In 1.1 min, 65 J is conducted at a constant rate from the right side to the left side. How much time would be required to conduct 65 J if the rods were welded side to side as in Figure (b)?
Carbon steel balls (r = 7833 kg/m3, k = 54 W/m·K, cp = 0.465 kJ/kg·°C, and a = 1.474 * 1026 m2/s) 8 mm in diameter are annealed by heating them first to 900°C in a furnace and then allowing them to cool slowly to 100°C in ambient air at 35°C. If the average heat transfer coefficient is 75 W/m2·K, determine how long the annealing process will take. If 2500 balls are to be annealed per hour, determine the total rate of heat transfer from the balls to the ambient air.
The tube in a heat exchanger has a 2-in inner diameter and a 3-in outer diameter. The thermal conductivity of the tube material is 0.5 Btu/h·ft·°F, while the inner surface heat transfer coefficient is 50 Btu/h·ft2·°F and the outer surface heat transfer coefficient is 10 Btu/h·ft2·°F. Determine the overall heat transfer coefficients based on the outer and inner surfaces.
A metal rod is 10 cm long and has a diameter of 2 cm one end is in contact with steam at 100 deg C while the other end contacts a block of ice at 0 deg C. The cylindrical surface of the rod is carefully insulated so heat flows only from one end to end. In a time of 20 minutes, 320 grams of ice melts. What is the thermal conductivity of the metal?
Two identical concrete slabs lie flat and in contact with each other as shown in the figure. If the temperature increases by 100 °F, the lower edges opposite the contact edges remained fixed in position, and the lower edges of the contact side remain in contact, what distance x the slabs rise? The coefficient of thermal expansion of the concrete is 40 × 10-6/K. The initial slab length is 5 m.
You mix mI = 1.2 kg of ice at TI = -21°C with mW = 4.8 kg of water at TW = 72°C in an insulated container. The specific heats of ice and water are cI = 2.10×103 J/(kg⋅°C) and cW = 4.19×103 J/(kg⋅°C), respectively, and the latent heat of fusion for water is Lf = 3.34 × 105 J/kg. Enter an expression for the final equilibrium temperature of the mixture in terms of the defined quantities.
An aluminum bar has a cross-section that is 5.1 cm by 6.93 cm and is 1.91 m long. Aluminum has a thermal conductivity of 205 W/m K. If the aluminum bar is used to bridge between ice at 0 °C and boiling water at 100 °C, what is the rate of heat transfer (in W) along the bar?
Suppose a person is covered head to foot by wool clothing with an average thickness of d = 1.95 cm and is transferring energy by conduction through the clothing at the rate of Q / Δt = 45 W. What is the temperature difference, in terms of the quantities given in the problem statement, across the clothing? Denote the surface area of the wool by A and the thermal conductivity by k.
A test is conducted to determine the overall heat transfer coefficient in a shell-and-tube oil-to-water heat exchanger that has 24 tubes of internal diameter 1.2 cm and length 2 m in a single shell. Cold water (cp = 4180 J/kg·K) enters the tubes at 20°C at a rate of 3 kg/s and leaves at 55°C. Oil (cp = 2150 J/kg·K) flows through the shell and is cooled from 120°C to 45°C. Determine the overall heat transfer coefficient Ui of this heat exchanger based on the inner surface area of the tubes.