In the figure, a uniform ladder of weight 200 N and length 10 m leans against a perfectly smooth wall. A firefighter of weight 600N climbs a distance x up the ladder. Thecoefficient of static friction between the ladder and the floor is 0.50. What is the maximum value of x for which the ladder will not slip?O 6.3 mO 3.9 mO 6.0 mO 8.4 mO 5.0 mSubmitRequest Answer

given: weight of ladder mg = 200 N length of ladder l=10 m weight of firefighter Mg = 600 N coeff.…

In the figure, a uniform ladder of weight 200 N and length 10 m leans against a perfectly smooth wall. A firefighter of weight 600N climbs a distance x up the ladder. Th coefficient of static friction between the ladder and the floor is 0.50. What is the maximum value of x for which the ladder will not slip? 50 O 6.3 m O 3.9 m O 6.0 m O 8.4 m O 5.0 m

In the figure, a uniform ladder of weight 200 N and length 10 m leans against a perfectly smooth wall. A firefighter of weight 600N climbs a distance x up the ladder. Th coefficient of static friction between the ladder and the floor is 0.50. What is the maximum value of x for which the ladder will not slip? 50 O 6.3 m O 3.9 m O 6.0 m O 8.4 m O 5.0 m

College Physics

11th Edition

ISBN:9781305952300

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter8: Rotational Equilibrium And Dynamics

Section: Chapter Questions

Problem 36P

See similar textbooks

Similar questions

A stepladder of negligible weight is constructed as shown in Figure P10.73, with AC = BC = = 4.00 m. A painter of mass m = 70.0 kg stands on the ladder d = 3.00 m from the bottom. Assuming the floor is frictionless, find (a) the tension in the horizontal bar DE connecting the two halves of the ladder, (b) the normal forces at A and B, and (c) the components of the reaction force at the single hinge C that the left half of the ladder exerts on the right half. Suggestion: Treat the ladder as a single object, but also treat each half of the ladder separately.
A uniform ladder of length L and mass m1 rests against a frictionless wall. The ladder makes an angle with the horizontal. (a) Find the horizontal and vertical forces the ground exerts on the base of the ladder when a firefighter of mass m2 has climbed a distance x along the ladder from the bottom. (b) If the ladder is just on the verge of slipping when the firefighter is a distance d along the ladder from the bottom, what is the coefficient of static friction between ladder and ground?
A 10.0-kg monkey climbs a uniform ladder with weight 1.20 102 N and length L = 3.00 m as shown in Figure P12.14. The ladder rests against the wall and makes an angle of = 60.0 with the ground. The upper and lower ends of the ladder rest on frictionless surfaces. The lower end is connected to the wall by a horizontal rope that is frayed and can support a maximum tension of only 80.0 N. (a) Draw a force diagram for the ladder. (b) Find the normal force exerted on the bottom of the ladder. (c) Find the tension in the rope when the monkey is two-thirds of the way up the ladder. (d) Find the maximum distance d that the monkey can climb up the ladder before the rope breaks. (e) If the horizontal surface were rough and the rope were removed, how would your analysis of the problem change? What other information would you need to answer parts (c) and (d)? Figure P12.14
A stepladder of negligible weight is constructed as shown in Figure P10.73, with AC = BC = ℓ. A painter of mass m stands on the ladder a distance d from the bottom. Assuming the floor is frictionless, find (a) the tension in the horizontal bar DE connecting the two halves of the ladder, (b) the normal forces at A and B, and (c) the components of the reaction force at the single hinge C that the left half of the ladder exerts on the right half. Suggestion: Treat the ladder as a single object, but also treat each half of the ladder separately. Figure P10.73 Problems 73 and 74.
A wooden door 2.1 m high and 0.90 m wide is hung by two hinges 1.8 m apart. The lower hinge is 15 cm above the bottom of the door. The center of mass of the door is at its geometric center, and the weight of the door is 260 N, which is supported equally by both hinges. Find the horizontal force exerted by each hinge on the door.
A uniform beam resting on two pivots has a length L = 6.00 m and mass M = 90.0 kg. The pivot under the left end exerts a normal force n1 on the beam, and the second pivot located a distance = 4.00 m from the left end exerts a normal force n2. A woman of mass m = 55.0 kg steps onto the left end of the beam and begins walking to the right as in Figure P10.28. The goal is to find the womans position when the beam begins to tip. (a) What is the appropriate analysis model for the beam before it begins to tip? (b) Sketch a force diagram for the beam, labeling the gravitational and normal forces acting on the beam and placing the woman a distance x to the right of the first pivot, which is the origin. (c) Where is the woman when the normal force n1 is the greatest? (d) What is n1 when the beam is about to tip? (e) Use Equation 10.27 to find the value of n2 when the beam is about to tip. (f) Using the result of part (d) and Equation 10.28, with torques computed around the second pivot, find the womans position x when the beam is about to tip. (g) Check the answer to part (e) by computing torques around the first pivot point. Figure P10.28
A uniform wire (Y = 2.0 1011 N/m2) is subjected to a longitudinal tensile stress of 4.0 107 N/m2. What is the fractional change in the length of the wire?
A 10.0-kg monkey climbs a uniform ladder with weight w = 1.09 ✕ 102 N and length L = 3.40 m as shown in the figure below. The ladder rests against the wall at an angle of ? = 60°. The upper and lower ends of the ladder rest on frictionless surfaces, with the lower end fastened to the wall by a horizontal rope that is frayed and that, can support a maximum tension of only 80.0 N.
A uniform ladder whose length is 5.0 m and whose weight is 400 N leans against a frictionless vertical wall. The coefficient of static friction between the level ground and the foot of the ladder is 0.46.What is the greatest distance the foot of the ladder can be placed from the base of the wall without the ladder immediately slipping?
A person is standing on a section of uniform scaffolding as shown in the figure. The section of scaffolding is L = 1.50 m in length, has a ms = 24.5 kg mass and is supported by three ropes as shown. Determine the magnitude of the tension in each rope when a person with a weight of Wp = 640 N is a distance d = 0.700 m from the left end. magnitude of T1 N magnitude of T2 N magnitude of T3 N
A 2.4 m ladder rests on a vertical wall as shown in the figure. The ladder has 7 rungs and the rungs are spaced 0.30 m apart, and the top and bottom rungs are 0.30 m from their respective ends of the ladder. Surfaces at A and B both have the same coefficient of friction. If a worker weighs 360 N and stands on the middle rung, determine the minimum value of the coefficient of friction so that the ladder does not slide. Neglect the weight of the ladder.
A uniform ladder rests against a smooth wall so that it makes an angle of 60° with the ground. The ladder is 10.0 m long and weighs 150 N. How far can a 250 N child go before the ladder slips? The coefficient of friction between the ladder and the ground is 0.4.