In the refrigeration experiment, the following values were measured when using the TXV valve (the TXV valve has been calibrated for a superheat temperature of 5C)°: 1- Temperature at the compressor outlet: 94.7±0.5°c 2- Absolute pressure at the valve inlet: 1150± 40 kPa 3- Absolute pressure at the valve outlet: 260± 10 kPa What is the error in the enthalpy of the refrigerant leaving the condenser in units of kJ/kg? Use at least 2 significant digits when you fill in your answer. NOTE: Assume that the quality at the exit of the condenser is exactly zero with no error.

In the refrigeration experiment, the following values were measured when using the TXV valve (the TXV valve has been calibrated for a superheat temperature of 5C)°: 1- Temperature at the compressor outlet: 94.7±0.5°c 2- Absolute pressure at the valve inlet: 1150± 40 kPa 3- Absolute pressure at the valve outlet: 260± 10 kPa What is the error in the enthalpy of the refrigerant leaving the condenser in units of kJ/kg? Use at least 2 significant digits when you fill in your answer. NOTE: Assume that the quality at the exit of the condenser is exactly zero with no error.

Name: In the refrigeration experiment, the following values were measured w
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: In the refrigeration experiment, the following values were measured when using the TXV valve (the TXVvalve has been calibrated for a superheat temperature of 5C)°:1- Temperature at the compressor outlet: 94.7±0.5°c2- Absolute pressure at the valve i

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

In a condenser test, the following observations were made:Vacuum = 69 cm of HgBarometer = 75 cm of HgMean temperature of condenser = 35°CHot well temperature = 28°CAmount of cooling water = – 50,000 kg/hrInlet temperature = 17°COutlet temperature = 30°CAmount of condensate per hour = 1250 kgFind(a) the amount of air present per m3 of condenser volume.(b) the state of steam entering the condenser.(c) the vacuum efficiency .R for air = 287 J/kgK
In a power plant operating with water and steam, the following measurements and observations were done at various stages along the system. the pressure is 150 kPa and the enthalpy, h is 1580.115 (kJ/kg) For this case, the specific vvolume is most likely: 0.001070 2.01302 1.1594 0.5802 0.001053
A steam boiler has the following data: - Steam output: 8000 lb/hr - Steam pressure: 135 psia - % moisture: 1% - Feedwater temperature: 120 F - Boiler Surface Area: 1330 ft2 Determine: a. Factor of evaporation b. Equivalent evaporation c. Boiler horsepower d. Boiler rating
Methanol (SG=0.792) is contained in a large tank under a pressure of 350000 Pa absolute. When a valve on the bottom of the tank is opened, the methanol drains freely though a 0.02 m ID tube whose outlet is 7.00 m below the surface of the methanol. The pressure at the outlet of the discharge pipe is 101325 Pa. Some useful constants and conversions: g = 9.8 m/s2 , Pref = 1000 kg/m3 . a. Draw the system. Label points I and 2 (where you will define A= 2-1) and label the variables with values b Write the general form of the energy balance. Cancel out negligible terms, and state the keyword/assumption to justify. Simplify to the resultant energy balance. c.) Assume the diameter of the tank is very big compared to the drain tube velocity, which make the velocity of liquid in the tank equal to zero. Estimate the methanol discharge velocity in the drain tube in m/s. *hint: divide your EB by m to eliminate m and V. Recall, n = pV = pvA and = v/m=1/p
8.a. When a machine is tested, the volume of cooling air is 1250 cfm. If the temperature of the entering air is 25 C and the temperature of the outgoing air is 35 C, the loss in the machine isA. 7.1 kw.B. 24.8 kw.C. 12.5 kw.D. 17.7 kw. 8.b. When a motor is tested with a prony brake, the scale reading is 3.50 lb. The length of the brake arm is12 in. and its weight is 0.50 lb. If the motor speed is 1700 rpm and the power input is 1050 watts, themotor efficiency isA. 80.5%B. 69%C. 75%.D. 64.5%.
In a power plant operating with water and steam, the following measurements and observations were done at various stages along the system. the temperature is190oC and the specific volume, v is 0.15636 m3/kg. Based on this observation, identify the following values: pressure, P (in kPa) = _____, and enthalpy, h (in kJ/kg) = _____
A four-cylinder four-stroke petrol engine with the following specifications: - The bore(diameter) = 20 cm - The stroke = 30 cm - The compression ratio = 8 - The indicated power = 33 KW - The engine speed = 2500 rpm - The indicated thermal efficiency = 35% - The friction power = 25 kW - The calorific value ( heating value) = 42000 kJ/kg . Determine the following: a) The indicated mean effective pressure. b) Thermal efficiency. c) Specific fuel consumption per hour. d) The Torque (given K = 1.4)
The power required to drive the compressor in a Carnot refrigerator is 62 hp. It operates between -6°C and 45°C. Determine the coefficient of performance. Final answer must be in 3 decimal places.
There are two double-acting pneumatic actuators, the extension of each one is executed in 5 seconds at 80 psi and recoil in 4 seconds at 30 psi, the travel of both is 12 inches, the diameter of the piston is dp = 4 "and of the rod dv = 1"a) Determine the compression ratios. The local atmospheric pressure is 79kpa = (11.5 psi)b) Determine the air consumption in cubic feet per minute of free air PCMc) Determine the average air consumption for each.d) Propose the regulation values of the pressure switch, system pressure and safety valve
Zeroth Law of Thermodynamics 1. A mercury manometer indicates a vacuum of 62 cm of mercury 20 ℃ in a condenser. Determine the absolute pressure in the condenser in pascals if thebarometer pressure is 750 mm of mercury. 2. A tank having a volume of 1.22 m3contains 6.48 kg of nitrogen and 7.78 kg of oxygen. Determine the density and the specific volume of the mixture.
5) An auditorium is designed to seat 4500 people. The ventilation rate is 1.62 x 107 ft3/hr of outside air. The outside temperature is 0oF dry bulb, and outside pressure is 14.6 psia. Air leaves the auditorium at 70oF dry bulb. There is no recirculation. The furnace has a capacity of 1,250,000 Btu/hr. The temperature at which the air should enter the auditorium is most nearly
1 - The pressure of a 28 liter fixed volume closed vessel is 300 kPa. Which of the following is the degree of dryness of the 8 kg R-134a refrigerant in the container? a) 0.077769 B) 0.010710 NS) 0.210697 D) 0.509288 TO) 0.040569