In the shown figure, both the tank and the tube are open to the atmosphere. If A = 60 cm, B = 70 cm, and L = 230 cm, what is the angle of tilt e of the tube? Oil A SG = 0,8 Water B SG = 1.0 20.951 degree C 23.357 degree C 26.066 degree C 28.999 degree C 30.867 degree C 34.247 degree C 37.784 degree C 40.681 degree C 43.811 degree C 46.989 degree C

In the shown figure, both the tank and the tube are open to the atmosphere. If A = 60 cm, B = 70 cm, and L = 230 cm, what is the angle of tilt e of the tube? Oil A SG = 0,8 Water B SG = 1.0 20.951 degree C 23.357 degree C 26.066 degree C 28.999 degree C 30.867 degree C 34.247 degree C 37.784 degree C 40.681 degree C 43.811 degree C 46.989 degree C

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A rectangular gate 1.60 m wide and 2.40m high has water on one side and is inclined 45\deg with them horizontal. Water is 1.50m above the top of the gate. Evaluate the location, in meters, of the center of pressure from the top of the gate. a. 1.34 b. 1.49 C.1.56 d. 1.64
Find the volume of water in the horizontal cylindrical tank if it is 7/8 full. Radius of tank is 600mm and the length of the tank is 5m. If tank is placed in a vertical position, what is the depth of water inside the tank? A. 5.13m B. 4.38m C. 4.71m D. 3.37m
A square tank 1.20m on each side,3m deep is filled to a depth of 2.70m with water. A WOODEN CUBE having a specifix gravity of 0.5 measuring 60 cm on an edge is placed in the water so that it will float. A.) Determine the weight of the water displaced by the cube Choices: 2.12 kN,1.06kN,1.15kN,2.30kN B.)Determine the rise of water above the original liquid surface Choices: 0.15m,0.088m,0.075m,0.30m C.) Determine the change in pressure force on one side of the tank Choices: 2.84kN,2.55kN,2.42kN,2.75Kn
A jet issues from the side of the tank under a head of a=4.36m. The orifice is positioned 5.94 meters above the bottom of the tank. Determine the point it strikes a horizontal plane c=1.17m below the bottom of the tank. Assume the jet will follow a projectile motion. The angle is 47 degrees and Cv=0.938.
A horizontal 7.5 cm diameter sharp-edged orifice with Cc = 0.063 and Cv= 0.98 is under a head of 2.30 m of water (surface is atmospheric) compute the height to which the jet of water will rise above the orifice. a.3.123 m. b.2.208 m. c.1.202 m. d.0.782 m.
Fluid mechanics, vane question: Determine the external reactions in the x- and y-directions needed to hole this fixed vane which turns the oil jet in a horizontal plane. Here V1=18m/s, V2=17m/s, and Q=0.15m3/s.
an open circular vessel is 1m in diameter and 2m in height. it contains water filled to a depth of 1.5m. if the cylinder rotates about its vertical axis, what is the pressure intensity at the center of the bottom if w= 6 radians/second? (Unit of the correct answer : kPa) CHOICES a.) 12.465 b.) 21.456 c.) 16.425 d.) 15.542
A square tank 1.20m on each side, 3m deep is filled to a depth of 2.7m with water. A wooden cube having a specific gravity of 0.5 measuring 60cm on an edge is placed in the water so that it will float. Determine the depth of submergence of the cube in the water, the rise of water above the original liquid surface, and the distance of the bottom of the cube from the bottom of the tank.
Water flows from a large reservoir A to a lower large reservoir B through 291 m of smooth sloped piping as shown in the drawing. Both reservoirs have their surfaces open to the open air, the specific mass of the water is 998 kg/m³ and the kinematic viscosity of the water is equal to 0.00000101 m²/s. The internal diameter of the pipe is 0.091 m and the average velocity of water flowing through this pipe is 2 m/s. Neglecting the localized head losses of the tube inlet and outlet in the reservoirs, calculate the difference in the dimensions of the reservoir surfaces in m necessary to maintain the average flow velocity in the tube at this given value of 2 m/s. Suggestion: Use the explicit S.E. Haaland equation for the calculation of the friction factor.
A rectangular plane surface 1 m wide and 3 m deep lies in water in such a way that its plane makes an angle of 30 degrees with the free surface of water. Determine the position of the center of pressure from the free water surface when the upper edge of the plate is 2 meter below the free water surface. a. 1.686 m b. 2.318 m c. 2.0 m d. 4.56 m With F.B.D
Determine the head loss in the "smooth" pipe in meters if its friction factor is 0.014. a.12.9517 b.39.5136 c.30.4889 d.99.9358 What gage pressure p1 in kPa, is needed to provide the given flow rate? a.1692 kPa b.1121 kPa c.1328 kPa d.1725 kPa
Points A and B are 5km apart along a new 60cm diameter cast iron pipe carrying water. A is 9m higher than B. If the pressure at B is 140KPa greater than at A. f=0.019. Determine the head loss in meters choices: 7.52 2.75 5.27 7.25 Determine the flow rate in lit/sec choices: 822.55 885.22 228.55 522.88