Hello question is attached, thanks. Kinnear Plastics manufactures various components for the aircraft and marine industry. Kinnear buys plastic from twovendors: Tappan Corporation and Hill Enterprises. Kinnear chooses the vendor based on price. Once the plastic isreceived, it is inspected to ensure that it is suitable for production. Plastic that is deemed unsuitable is disposed of.The controller at Kinnear collected the following information on purchases for the past year.HillTotal purchases (tons)Plastic discardedТаppan4,4001108,200410The purchasing manager has just received bids on an order for 150 tons of plastic from both Tappan and Hill. Tappanbid $1,482 and Hill bid $1,463 per ton. Required:1-a. Assume that the average quality, measured by the amounts discarded from the two companies, will continue as in the past. Whatis the effective cost per ton for both Tappan and Hill? (Do not round intermediate calculations.)ТаppanHillEffective cost per ton1-b. Which supplier would you recommend that the purchasing manager select?ТаppanO Hill

We have the following information: Total purchasesTappan: 4,400Hill: 8,200 Plastic DiscardedTappan:…

Kinnear Plastics manufactures various components for the aircraft and marine industry. Kinnear buys plastic from two vendors: Tappan Corporation and Hill Enterprises. Kinnear chooses the vendor based on price. Once the plastic is received, it is inspected to ensure that it is suitable for production. Plastic that is deemed unsuitable is disposed of. The controller at Kinnear collected the following information on purchases for the past year. Total purchases (tons) Plastic discarded Таppan 4,400 110 Hill 8,200 410 The purchasing manager has just received bids on an order for 150 tons of plastic from both Tappan and Hill. Tappan bid $1,482 and Hill bid $1,463 per ton.

Kinnear Plastics manufactures various components for the aircraft and marine industry. Kinnear buys plastic from two vendors: Tappan Corporation and Hill Enterprises. Kinnear chooses the vendor based on price. Once the plastic is received, it is inspected to ensure that it is suitable for production. Plastic that is deemed unsuitable is disposed of. The controller at Kinnear collected the following information on purchases for the past year. Total purchases (tons) Plastic discarded Таppan 4,400 110 Hill 8,200 410 The purchasing manager has just received bids on an order for 150 tons of plastic from both Tappan and Hill. Tappan bid $1,482 and Hill bid $1,463 per ton.

Principles of Accounting Volume 2

19th Edition

ISBN:9781947172609

Author:OpenStax

Publisher:OpenStax

Chapter10: Short-term Decision Making

Section: Chapter Questions

Problem 5PA: Boston Executive. Inc., produces executive limousines and currently manufactures the mini-bar inset...

See similar textbooks

Similar questions

Boston Executive. Inc., produces executive limousines and currently manufactures the mini-bar inset at these costs: The company received an offer from Elite Mini-Bars to produce the insets for $2,100 per Unit and supply 1,000 mini-bars for the coming years estimated production. If the company accepts this offer and shuts down production of this part of the business, production workers and supervisors will be reassigned to other areas. Assume that for the short-term decision-making process demonstrated in this problem, the companys total labor costs (direct labor and supervisor salaries) will remain the same if the bar inserts are purchased. The specialized equipment cannot be used and has no market value. However, the space occupied by the mini bar production can be used by a different production group that will lease it for $55,000 per year. Should the company make or buy the mini-bar insert?
Ingles Corporation is a manufacturer of tables sold to schools, restaurants, hotels, and other institutions. The table tops are manufactured by Ingles, but the table legs are purchased from an outside supplier. The Assembly Department takes a manufactured table top and attaches the four purchased table legs. It takes 16 minutes of labor to assemble a table. The company follows a policy of producing enough tables to ensure that 40 percent of next months sales are in the finished goods inventory. Ingles also purchases sufficient materials to ensure that materials inventory is 60 percent of the following months scheduled production. Ingless sales budget in units for the next quarter is as follows: Ingless ending inventories in units for July 31 are as follows: Required: 1. Calculate the number of tables to be produced during August. 2. Disregarding your response to Requirement 1, assume the required production units for August and September are 2,100 and 1,900, respectively, and the July 31 materials inventory is 4,000 units. Compute the number of table legs to be purchased in August. 3. Assume that Ingles Corporation will produce 2,340 units in September. How many employees will be required for the Assembly Department in September? (Fractional employees are acceptable since employees can be hired on a part-time basis. Assume a 40-hour week and a 4-week month.) (CMA adapted)
Kinnear Plastics manufactures various components for the aircraft and marine industry. Kinnear buys plastic from two vendors: Tappan Corporation and Hill Enterprises. Kinnear chooses the vendor based on price. Once the plastic is received, it is inspected to ensure that it is suitable for production. Plastic that is deemed unsuitable is disposed of. The controller at Kinnear collected the following information on purchases for the past year: Tappan Hill Total purchases (tons) 6,000 10,000 Plastic discarded 120 600 The purchasing manager has just received bids on an order for 290 tons of plastic from both Tappan and Hill. Tappan bid $1,813 and Hill bid $1,786 per ton. Required: Assume that the average quality, measured by the amounts discarded…
Taylor Inc. produces summer dresses for women. Their dresses are made of cotton fabrics. The line workers are paid an hourly wage and the production supervisor is paid an annual salary. The products are tested for quality control by an independent party which charges a set price per month and an additional charge for each item tested. The machineries are depreciated on a straight-line basis. Which of the following items should be classified as a mixed cost? Group of answer choices Quality control costs Depreciation of the machineries Production supervisor’s salary Cotton fabrics
Blackburn Inc. uses Otavalo Manufacturing and Piura Company to buy two precision machined parts used in the manufacture of its permanent-magnet motors: Part #625 and Part #827. Consider two activities: testing parts and reordering parts. After the two parts are inserted, testing is done to ensure that the two parts work as intended. Reordering occurs because one or both of the parts have failed the test and it is necessary to replenish part inventories. Activity cost information and other data needed for supplier costing are as follows: I. Activity Costs Caused by Suppliers (testing failures and reordering as a result) Activity Costs Testing parts $4,500,000 Reordering parts 1,125,000 II. Supplier Data Otavalo Manufacturing Piura Company Part #625 Part #827 Part #625 Part #827 Unit purchase price $30 $78 $36 $84 Units purchased 450,000 225,000 56,250 56,250 Failed tests 4,500…
The F Inc.’s materials manager is considering the installation of a just-in-time (JIT) inventory system for L-20, one of the chemicals used in the production process. Currently, the chemical is purchased for $30 each pound. The firm uses 4,800 pounds L-20 per year. The controller estimates that it costs $150 to place and receive a typical order of L-20. The annual cost of storing L-20 is $1 per pound. F Inc.’s manufacturing engineering team identifies the following effects of adopting a JIT inventory system: 1) F Inc. will order 100 pounds L-20 each time. 2) The cost of placing an order for L-20 will be reduced to $20. 3) Suppliers would add $4 to the price per pound for frequent deliveries. 4) Currently there is a defect-assessment cost of $120,000 per year. This cost is expected a reduction of 20% under the JIT system. F Inc. requires a 10% annual rate of return on investment Required: From a financial perspective, determine whether it is in the best interest of F to…
Thomson Printing Company is a buyer and seller of used machinery. On April 10, the president of the company, James Thomson, went to the surplus machinery department of B.F. Goodrich Company in Akron, Ohio, to examine some used equipment that was for sale. Thomson discussed the sale, including a price of $9,000, with Ingram Meyers, a Goodrich employee and agent. Four days later, on April 14, Thomson sent a purchase order to confirm the oral contract for purchase of the machinery and a partial payment of $1,000 to Goodrich in Akron. The purchase order contained Thomson Printing’s name, address, and telephone number, as well as certain information about the purchase, but did not specifically mention Meyers or the surplus equipment department. Goodrich sent copies of the documents to a number of its divisions, but Meyers never learned of the confirmation until weeks later, by which time the equipment had been sold to another party. Thomson Printing brought suit against Goodrich for breach…
Zachary manufacturing company makes tents that it sells directly to camping enthusiasts through a mail-order marketing program. The company pays a quality control expert $121600 per year to inspect completed tents before they are shipped to customers. assume that the company completed 1,530 tents in January and 1,240 tents in February. For the entire year, the company expects to produce 19000 tents. required c) If the cost objective is to determine the cost per tent, is the expert's salary a direct or an indirect cost? D) How much of the expert's salary should be allocated to tents produced in January and February? If the cost objective is to determine the cost per tent is the expert's salary a direct or an indirect cost?
*Merriweather Corporation is a manufacturer of tables sold to schools, restaurants, hotels, and other institutions. The table tops are manufactured by Merriweather, but the table legs are purchased from an outside supplier. The Assembly Department takes a manufactured table top and attaches the four purchased table legs. It takes 20 minutes of labor to assemble a table. The company follows a policy of producing enough tables to ensure that 40% of next month's sales are in the finished goods inventory. Merriweather also purchases sufficient raw materials (legs) to ensure that raw materials (legs) inventory is 60% of the following month's scheduled production needs. Merriweather's sales budget in units for the next quarter is as follows: (CMA adapted) July 2,500 August 2,700 September 2,300 Merriweather's ending inventories in units for June 30 are: Finished goods 2,100 Raw materials (legs) 4,200 Assume the required production for August and…
Micron Manufacturing produces electronic equipment. This year, it produced 7,500 oscilloscopes at a manufacturing cost of $300 each. These oscilloscopes were damaged in the warehouse during storage and, while usable, cannot be sold at their regular selling price of $500 each. Management has investigated the matter and has identified three alternatives for these oscilloscopes. 1. They can be sold as is to a wholesaler for $75 each. 2. They can be disassembled at a cost of $400,000 and the parts sold to a recycler for $130 each. 3. They can be reworked and turned into good units. The cost of reworking the units will be $3,200,000, after which the units can be sold at their regular price of $500 each. Required Which alternative should management pursue? Show analysis for each alternative.
UTAH CORP. is a chemical manufacturer that supplies various products to industrial users. The company plans to introduce a new chemical solution called Bysap, for which it needs to develop a standard product cost. The following labor information is available on the production of Bysap. The product, which is bottled in 10-liter containers, is primarily a mixture of Byclyn, Salex, and Protet. The finished product is highly unstable, and one 10-liter batch out of six is rejected at the final inspection. Rejected batches have no commercial value and are thrown out. It takes a worker 35 minutes to process one 10-liter batch of Bysap. Employees work on eight-hour a day, including one hour per day for rest breaks and cleanup. What is the standard labor time to produce one 10-liter batch of Bysap? 2. MAINE INC.’s direct labor costs for the month of May are as follows: Standard direct labor hours allowed 12,500 Actual direct labor…
Bonita Inc., a manufacturer of steel school lockers, plans to purchase a new punch press for use in its manufacturing process. After contacting the appropriate vendors, the purchasing department received differing terms and options from each vendor. The Engineering Department has determined that each vendor's punch press is substantially identical and each has a useful life of 20 years. In addition, Engineering has estimated that required year-end maintenance costs will be $1,030 per year for the first 5 years, $2,030 per year for the next 10 years, and $3,030 per year for the last 5 years. Following is each vendor's sales package. Vendor A: $58,000 cash at time of delivery and 10 year-end payments of $16,360 each. Vendor A offers all its customers the right to purchase at the time of sale a separate 20-year maintenance service contract, under which Vendor A will perform all year-end maintenance at a one-time initial cost of $9,640. Vendor B: Forty semiannual payments of $9,120 each,…