Learning Goal: To use Hooke's law to determine the value of an axial load applied to a rectangular shape and to determine its lateral expansion. The element shown below is subjected to the axial compressive force P, which causes the shape to contract longitudinally in the direction a distance of 8 = 0.720 mm. Let h = 144.5 mm, w = 88.50 mm, and L= 298.0 mm. Assume the element is made from steel that has a modulus of elasticity of E = 200 GPa and a value of Poisson's ratio of v=0.32. ▼ Part A Value of the axial load Determine the value of the axial load P. Express your answer to four significant figures and include the appropriate units. View Available Hint(s) P = Submit μA Value Units ? Part B - Lateral expansion in the y direction Determine the lateral expansion in the y direction due to the axial load. Express your answer to four significant figures and include the appropriate units. View Available Hint(s) Submit μA 8. = Value Part C-Lateral expansion in the z direction Submit Determine the lateral expansion in the z direction due to the axial load. Express your answer to four significant figures and include the appropriate units. ▸View Available Hint(s) Units μA Value ? Units ?

Learning Goal: To use Hooke's law to determine the value of an axial load applied to a rectangular shape and to determine its lateral expansion. The element shown below is subjected to the axial compressive force P, which causes the shape to contract longitudinally in the direction a distance of 8 = 0.720 mm. Let h = 144.5 mm, w = 88.50 mm, and L= 298.0 mm. Assume the element is made from steel that has a modulus of elasticity of E = 200 GPa and a value of Poisson's ratio of v=0.32. ▼ Part A Value of the axial load Determine the value of the axial load P. Express your answer to four significant figures and include the appropriate units. View Available Hint(s) P = Submit μA Value Units ? Part B - Lateral expansion in the y direction Determine the lateral expansion in the y direction due to the axial load. Express your answer to four significant figures and include the appropriate units. View Available Hint(s) Submit μA 8. = Value Part C-Lateral expansion in the z direction Submit Determine the lateral expansion in the z direction due to the axial load. Express your answer to four significant figures and include the appropriate units. ▸View Available Hint(s) Units μA Value ? Units ?

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Mechanics of Deformable Bodies. Eight steel cables (with equal distance to each other) are supporting a circular heavy moulding of diameter 3m from an overhead point. If the moulding weighs 5 kN/m and the attachment point is 4m above it, determine the following: a. Calculate the tension of the cable. b. Determine the diameter of the wire if the allowable stress is 125 MPa. c. If the diameter of the cable is 10 mm, find the deflection of the steel cable. d. If the diameter of the cable is 10 mm, find the vertical displacement of the molder.
A concentric helical spring is used to support a load of 90 KN. The inner spring has arate of 495.8 KN/m and outside spring is 126.5 KN/m. If initially the inner spring is 25mm shorter than the outer spring, find the percent load carried by the inner spring. The correct answer is 76.81%. I just need the solution for this answer, thank you!
A uniform ladder 10m long and weighing 350N rests against a smooth wall at an angle of 30° with the wall. A 700N man stand 6m up from the bottom of the ladder. Find the horizontal force necessary to keep the ladder from slipping.
A uniform concrete slab of mass M is to be attached to two rods whose lower ends arw initially at the same level. find: The area of aluminium bar so that slab will remain level after it is attached to the rods. The stress in the steel rod if M=18000kg The stress in aluminum rod if M=18000kg The elongation of the streel rod The elongation of the aluminum rod.
In order to determine the magnitude of the internal forces, a FBD must be cut. It is difficult to determine where a cut should be made in order to reveal the Maximum Internal Forces, thus we have put the distance to the cut in terms of 'x', and plot the equation. In my lecture we took a generic portion of a Beam and applied equilibrium and saw that Loading, Shear and Moment are related to each through differential equations. Change in Shear is the Area under the Loading diagram. Change in Moment is the Area under the Shear Diagram. Using Graphic Integration draw the shear and moment diagrams for the given beams and loading.
Please show complete solution with formula and free body diagramA rectangular steel block is 4 inches long in the x direction, 3 inches long in the y direction, and 4 inches long in the z direction. The block is subjected to a triaxial loading of three uniformly distributed forces as follows: 48 kips tension in the x direction, 60 kips compression in the y direction, and 54 kips tension in the z direction. If ν = 0.30 and E = 29 × 106 psi, determine the single uniformly distributed load in the x direction that would produce the same deformation in the y direction as the original loading.
A rectangular steel block is 3 inches long in the x direction, 2 inches long in the y direction, and 4 inches long in the z direction. The block is subjected to a triaxial loding if three uniformly distributed forces as follows: 48 kips tension in the x direction, 60 kips compression in the y direction, and 54 kips tension in z direction. If v=0.30 and E=29x10^6 psi, determine the single uniformly distributed load in the x direction that would produce the same deformation in the y direction as the original loading. DetermineNormal strain in x, y & z direction.Elongation in x, y & z direction.
Floor joists are structural members which support flooring in structures, as in the diagram on the right. The floor sits upon the minor length of the joist, and the joists are set at equal spacing to reach the desired floor stiffness. How many 2x6 joists would it take to equal the floor stiffness of the same floor supported by ten (10) 2x12 joists of the same species?
A spring leaf is made with an unknown material and has a width of 2.7 inches, a thickness of 5/16 inches, and a length of 1 yard. The leaf spring has 2 full-length leaves and 5 graduated leaves. For a load of 1.5 kN, the leaf spring deflects 115 mm. A.) Find the modulus of elasticity of the spring steel used in the leaf spring in ksi. B.) Using the modulus of elasticity, find the stress experienced by the material in MPa of the strain is 0.015. Answer in the Given-Required-Solution format. Show the unit analysis and the answer should be at least in 4 decimals. Subject: Machine Design
Seatwork: Show your complete solution. Use 4 decimal places. Thermal Stress: In the LRT II project, steel railroad rails of 20 meters long are to be installed. If lowest temperature considered is 22 ℃ and a maximum temperature of 36 ℃ is designed for, and the modulus of elasticity of steel to be 207000 MPa, determine the clearance between rails such that adjoining rail will just touch at maximum design temperature.
A ladder with a uniform cross-section has a length of 4.80-foot long. It weighs W Ib. It is arranged such that one end is on the ground and the other against a vertical wall. The angle of triction at all contact surtaces is 20 degrees. What is the value of the coefficient of triction? What is f, in terms of variable Na? What is the normal force at A in terms of variable W? Answer in three decimal places
Solve the problem below. For your final answer, use whole number. An extra flexible 8 × 19 steel wire rope of 38 mm diameter is used with a 2 m diameter hoist drum to lift 70 kN of load. The wire rope has a length of 900 meters. The maximum speed is 3 m / s and the acceleration is 1.5 m / s2. The diameter of the wire may be taken as 0.05 d, where d is the diameter of wire rope. The modulus of elasticity of the entire rope is 84 × 103 N/mm2. The weight of the rope is 53 N/m length. Determine the effective load during acceleration of load in kN.