Learning Goal: To use the principle of work and energy to determine characteristics of a mass being pulled up an incline and determine the power that must be supplied to the system when the efficiency of the input system is considered. As shown, a 58 kg crate is pulled up a 0 = 65° incline by a pulley and motor system. Initially at rest, the crate is pulled s = 3.1 m up along the incline. Undergoing constant acceleration, the crate reaches a speed of 2.7 m/s at the instant it has traveled this distance. (Figure 1) Figure 1 of 1 Part A - Power supplied to the crate when friction is considered Considering the coefficient of kinetic friction, μ = 0.15, determine the power that the motor must supply to the crate the instant the crate travels a distance of 3.1 m Express your answer to two significant figures and include the appropriate units. ► View Available Hint(s) P = Submit Di μA Value Units ? Part B - Power supplied to the motor when efficiency is considered If the motor has an efficiency of = 0.88, what power must be supplied to the motor to raise the crate? Express your answer to two significant figures and include the appropriate units.

Learning Goal: To use the principle of work and energy to determine characteristics of a mass being pulled up an incline and determine the power that must be supplied to the system when the efficiency of the input system is considered. As shown, a 58 kg crate is pulled up a 0 = 65° incline by a pulley and motor system. Initially at rest, the crate is pulled s = 3.1 m up along the incline. Undergoing constant acceleration, the crate reaches a speed of 2.7 m/s at the instant it has traveled this distance. (Figure 1) Figure 1 of 1 Part A - Power supplied to the crate when friction is considered Considering the coefficient of kinetic friction, μ = 0.15, determine the power that the motor must supply to the crate the instant the crate travels a distance of 3.1 m Express your answer to two significant figures and include the appropriate units. ► View Available Hint(s) P = Submit Di μA Value Units ? Part B - Power supplied to the motor when efficiency is considered If the motor has an efficiency of = 0.88, what power must be supplied to the motor to raise the crate? Express your answer to two significant figures and include the appropriate units.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Learning Goal: To be able to use the conservation of energy on a moving body to determine key characteristics of the mechanics of the system. A package of mass m = 0.50 kg is pushed across the surface by a jet of compressed air during an assembly-line process. The package is moved through a distance of s = 50.0 cm. The package and the surface are known to have a coefficient of kinetic friction of μk = 0.15. The package is initially at rest for this process. PART A: If the package must be moving at a speed of v = 20.0 cm/s when it has reached the distance of 50.0 cm, determine the average force that the jet of compressed air must supply to the package PART B: If it is now desired that the package is at rest when it has reached the distance of 50.0 cm, determine the average force that the jet of compressed air must supply to the package if the package is initially traveling in the s direction at a velocity of v = 16.5 cm/s. PART C: If the plant has changed the mass of the package…
The force exerted on a car by a prototype crash barrier crash is F=-(4400 + 50000S) N, where S in the distance in meters from the initial contract. Suppose that you want to design the barrier so it can stop a 2400kg car traveling at 100kph. Determine the average power transferred from the car during the impact if the duration of impact of the car is 0.33 sec.
A block with a mass of m is dropped from a certain height. An undeformed spring with a spring constant of 450 N/m is placed directly below it. The distance between the top of the spring and the block is 3 m. Determine the magnitude of velocity of the block just before it hits the spring (use principles of work and energy) and prove using kinematic equations Determine the deformation of the spring as the block reaches its lowest point. (use principles of work and energy) Determine the magnitude of the velocity of the block as the spring returns to its original length. use (principles of work and energy) hello please help thank youuuu very very urgent
Consider a person who momentarily puts all of their body weight on one leg when walking or running. The forces acting on the leg and the corresponding biomechanical model of the system are shown in Fig.- Prob. 10(a) and (b). Point O corresponds to the center of rotation of the hip joint. A is the connection point of the hip abductor muscle with the femur; point B is the center of gravity of the leg; and C is the point of application of the ground reactive force. The distances between point A and points O, B, and C are: a = 8.6 cm, b = 34.3 cm, and c = 89.4 cm. The angles formed by the femoral neck and the longitudinal axis of the femur with respect to the horizontal are alpha = 43° and beta = 79°, respectively. Furthermore, for this position of the person standing on one leg, it has been estimated that the magnitude of the force exerted by the hip abductor muscle is FM = 2062.6 N and its line of action forms an angle of theta = 69° with respect to the horizontal. If the magnitude of…
A bullet of mass 50 gm is fired into a freely suspended target of 2.5 kg. On impact, thetarget moves with a velocity of 2.5 m/s. Find the velocity of the bullet and the loss ofkinetic energy, if the impact is perfectly inelastic.
A heat pump used for heating shown is essentially an air conditioner installed backward. It extracts energy from colder air outside and deposits it in a warmer room. Suppose the ratio of the actual energy entering the room to the work done by the device’s motor is 10.0% of the theoretical maximum ratio. Determine the energy entering the room per joule of work done by the motor given that the inside temperature is 20.0°C and the outside temperature is -5.00°C.
One end of a horizontal spring with force constant 130.0 N/m is attached to a vertical wall. A 4.00 kg block sitting on the floor is placed against the spring. The coefficient of kinetic friction between the block and the floor is mk = 0.400. You apply a constant force F to the block. F has magnitude F = 82.0 N and is directed toward the wall. At the instant that the spring is compressed 80.0 cm, what are (a) the speed of the block, and (b) the magnitude and direction of the block’s acceleration?
Khufra works at a spring factory and he was assigned to test a certain spring, whose constant is 50 N/m attached to a 50-kg block in an incline (©=30°). With the spring initially at equilibrium position, the block was pushed 0.3 meters up the incline by a 50-N external force applied parallel to the path. The coefficient of kinetic friction is 0.30. d) How much work is done by the block (in Joules) on the spring? e) How much work is done by the applied push on the block? f) How much work is done by friction?
A mass of 4.0 kg is placed on a spring which has a spring constant of 256 N/m and compresses it a length of 87 cm from its equilibrium position. This set up is on an incline at an angle of 40º above the horizontal and there is a coefficient of kinetic friction of 0.17 between the mass and the surface. What will the speed of the mass be when it has moved a total distance of 1.0 m up the incline from its starting position. (Use g = 9.8m/s2 and round answer to 1 decimal place.)
An inextensible massless string goes over a frictionless pulley. Two weights of 100 N and 200 N are attached to the two ends of the string. The weights are released from rest, and start moving due to gravity. What is the tension in the string?
A 1kg mass attached to a spring ,with spring constant of 5N/m, was stretched 40cm from its original position. It was suddenly released. Find the velocity of the mass upon reaching its original position.
One engine works with constant power P and the other one increases its power linearly with time. What is the ratio of the work done by the engines (engine two to engine one) if the second engine increased its power from zero to 3.6 P during the observed time?