Let's consider a rod having a solid circular cross-section with diameter of 5 mm and it is made of a material having a Young's modulusE=120 Gpa and a Poisson's ratio of 0.33. If a tensile force F is subjected to that rod cross-section, the diameter becomes 4.995 mm. determine the applied force F.

Let's consider a rod having a solid circular cross-section with diameter of 5 mm and it is made of a material having a Young's modulusE=120 Gpa and a Poisson's ratio of 0.33. If a tensile force F is subjected to that rod cross-section, the diameter becomes 4.995 mm. determine the applied force F.

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter2: Axially Loaded Members

Section: Chapter Questions

Problem 2.3.21P: A slightly tapered bar AB of solid circular crass section and length L is supported at end B and...

See similar textbooks

Related questions

Q: 6. The diameter of a piston of the steam engine is 300 mm and the maximum steam pressure is 0.7…

A: Dear student as per the policy i can solve one question for you request you to please post the other…

Q: A circular pipe of internal diameter 30 mm and thickness 4 mm is subjected to a force 30 kN and the…

Q: For the figure shown, if the temperature dropped by 40 °C in the aluminum ........ rod, then the…

A: Given:Ls=1.5 mAs=250 mm2Es=200 GPaαs=12*10-/°CLa=1 mAa=1000 mm2Ea=70 GPaαa=23*10-6/°C

Q: An cylinder is 30 cm in diameter and the steam pressure is 7 kg/cm. If the cylinder head is held by…

Q: Let's consider a rod having a solid circular cross-section with diameter of 6 mm and it is made of a…

Q: Compute the deformation (change in length) of bronze (B) and steel (S) in the given diagram below,…

Q: Find out the crippling stress of the column if E=2×105N/mm2 . Also, find out the shortest length of…

A: Given: Fix-hinge support do=40 mm=0.04 mdi=20 mm=0.02 mL=5 mE=2×105 N/mm2σy=250 N/mm2 To determine:…

Q: Rod AB is fixed at side A with a length of 500m and a diameter of 20m. On side B, the rod…

Q: Let's consider a rod having a solid circular cross-section with diameter of 5 mm and it is made of a…

A: Given: The initial diameter of the rod is d=5 mm. The Young's modulus of material is E=120 MPa. The…

Q: . A sheet of plywood consists of three equally thick sheets, the upper and lower sheets having their…

A: Given Tensile modulus, E1 = 10 GPa E2 = 0.4 GPa Find Tensile…

Q: If Young's modulus of some material is 150 GPa and shear modulus is 50 GPa, find the poisson's ratio…

A: Given, Young's modulus = E = 150 GPa Shear modulus = G = 50 GPa Let us consider, Poisson's ratio…

Q: The longitudinal strain in a cylindrical bar of diameter 20mm and length 2.5m during the tensile…

Q: Let's consider a rod having a solid circular cross-section with diameter of 6 mm and it is made of a…

Q: Q2/ A metal rod of cross-sectional area 100 mm 2 curries a maximum tensile loud of 20 kN. The…

A: Suppose a normal load 'P' is applied on a rod having cross-sectional area 'A' and modulus of…

Q: 3.8 The discs in the spinal column can withstand a stress (force per unit area) of 1.1 x 107 N/m2…

A: Given dataStress in the spinal column σmax = 1.1(10)7 N/m2Cros sectional area A = 10cm2= 10-3m2To…

Q: A 12mm thick steel tire has a width of 110mm and has an internal diameter of 800mm. The tire is…

Q: 2. An aluminum rod is 1.5 m long. For aluminum, Young's Modulus is E = 70 GPa. An axial force of 3…

Q: A wire with a Young’s Modulus, E, of 8.5 x 106 N/m2 and an original length of 1.5 m is under…

A: Calculate the strain in the wire. ε=δll Here, l is the original length of the wire, δl is the change…

Q: Let's consider a rod having a solid circular cross-section with diameter of 4 mm and it is made of a…

Q: As shown, there is a gap between the aluminum bar and the rigid slab that is supported by two copper…

Q: A steel (E=30x106 psi) rod 10m long and 5cm in diameter is subjected to a compressive force of…

Q: A steel circular tube is subjected to torsion by torques T applied at the ends as shown below. The…

A: This problem is related to the torsion of the shaft. torsion, when the twisting moment is applied to…

Q: Find the thickness of a metal needed of the semi-spherical end of cylinder vessel 0.70 meter in…

A: Given Tensile stress = 69 N/mm2 Pressure, P = 2.70 N/mm2 Diameter, d = 0. 7 m Find…

Q: A cross-sectioned rod (5*5cm) was subjected to a compressino force (F=500 103 N), so the resulting…

Q: Figure Q2 shows a shaft consists of Rods AB, BC and CD which made of Aluminium, Brass and Steel,…

Q: Calculate the resulting stress in an aluminum wire, 4-m long and 2.6 mm in diameter, if a 12.5 -kg…

Q: If the length and diameter of a material is 25 cm and 10 mm respectively. Then find the elongation…

A: Given : load, W =750*103N length, L=250mm diameter,d =10mm Area,A =π/4*d2 =78.53 mm2 young modulus ,…

Q: A rod is subjected to a uni-axial load within linear elastic limit. When the change in the stress is…

A: Given data: The change in the stress is σ = 200 MPa. The change in the stain is ε = 0.001. The…

Q: 3. A wrought iron rod is under a compressive load of 350 kN. If the permissible stress for the…

A: We are suppose to solve only one question. Please post other question as a separate question. For…

Q: A 3/4 -in-diameter steel tension rod is 6 ft long and carries a load of 15 kip. Find the tensile…

A: Given data: Diameter of rod = 0.75 inch = 0.01905 m Length of rod = 6 ft = 6 x 12 = 72 inch =…

Q: A 23 mm diameter bronze bar 2.8 m long is placed between two rigid walls. At a temperature of -3°C,…

Q: The piston rod of a steam engine is 50 mm in diameter and 600 mm long. The diameter of the piston is…

A: Given, Diameter of piston rod = d = 50 mm Length of piston rod = L = 600 mm Diameter of piston = D =…

Q: A hollow cylinder 2 m long has an outside diameter of 50 mm and inside diameter of 30 mm. If the…

A: According to Hooke's Law, Stress is directly proportional to the strain up to a certain point. After…

Q: Find the maximum value of P that will not exceed a stress in steel of 113 MPa, in aluminum of 91 000…

A: Given data Limiting stress in steel (σallow)st = 113 MPa Limiting stress in aluminum (σallow)al =…

Q: determine the applied force F.

Q: 4. A 200 x 100 x 50 mm steel block is subjected to a hydrostatic pressure of 15 MPa. The Young's…

A: Given data, Volume of the steel block, V=200×100×50 mm3 Hydrostatic pressure, P = 15 MPa Young's…

Q: The ratio of modulus of rigidity to bulk modulus for a Poisson's ratio of 0.25 would be: (а) 2/3 (с)…

A: Given, Poisson's ratio = μ = 0.25 From the relation between Young's modulus and Modulus of…

Q: The steel bar with a circular cross section of 14 mm diameter and 22 cm length, produced from a…

Q: Question 1. A rod is 3 m long at a temperature of 15°C. Find the expansion of the rod, when the…

Q: 'igure Q5 shows few loadings applied on bar ABD. Suppose the diameter of the bar is 120 mm, and…

Q: For a steel beam loading, the maximum normal compressive stress is - 6 MPa, maximum normal tensile…

Q: A circular rod of diameter 8 mm and 300 mm long is subjected to a tensile force 20 kN. Take E =…

A: Given data:

Q: A wire with a Young’s Modulus, E, of 8.5 x 106 N/m2 and an original length of 1.5 m is under…

A: Given: Young's modulus (E)=8.5×106N/m2Original length (L)=1.5mElongation (δ)=2.5mm or 0.0025m

Q: Let's consider a rod having a solid circular cross-section with diameter of 4 mm and it is made of a…

Q: From the tensile stress-strain behavior for the brass specimen ,P the diamcter is 12-8 mm Calculate…

Q: 3. The ram of a hydraulic press 200 mm internal diameter is subjected to an internal pressure of…

A: This problem is related to the thin cylinder vessels. a cylindrical vessel or shell may be thin or…

Q: A solid circular bar of steel (G = 78 GPa)transmits a torque T = 360 N ? m. The allowablestresses in…

Q: 2.75 A steel rod is stretched between two walls. At 20°C, the tensile force in the rod is 5000 N. If…

Concept explainers

Thermal Properties of Materials

In mechanical engineering, the thermal property is represented as the physical quantity that is relevant to the application of heat. The thermal properties are evaluated by variations in any specific material due to low heat or high heat. The quantities that influence the thermal property of the materials are mass, density, temperature, and many others.

Question

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Types of Properties of Engineering Materials

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

-26 A rectangular plate of dimensions 125 mm × 75 mm is subjected to tensile stress sy= 67 kPa and compressive stress a. If it is known that the normal stress along the diagonal t—t is ??t= -6.57 kPa, find stress ??y on element A. a
A wine of length L = 4 ft and diameter d = 0.125 in. is stretched by tensile forces P = 600 lb. The wire is made of a copper alloy having a stress-strain relationship that may be described mathematically by =18,0001+30000.03(=ksi) in which is nondimensional and has units of kips per square inch (ksi). (a) Construct a stress-strain diagram for the material. (bj Determine the elongation, of the wire due to the Forces P. (c) IF the forces are removed, what is the permanent set of the bar? (d) If the forces are applied again, what is the proportional limit?
A cylinder filled with oil is under pressure from a piston, as shown in the figure. The diameter d of the piston is 1,80 in. and the compressive force F is 3500 lb. The maximum allowable shear stress t^^, in the wall of the cylinder is 5500 psi. What is the minimum permissible thickness t„± of the cylinder wall? (Sec figure
A spherical balloon is filled with a gas. The outer diameter of the balloon is 20 in. and the thickness is 0,012 in. Calculate the maximum permissible pressure in the balloon if the allowable tensile stress and the allowable shear stress in the balloon are 1 ksi and 0.3 ksi, respectively.
A rubber ball (sec figure) is inflated to a pressure of 65 kPa. At that pressure, the diameter of the ball is 240 mm and the wall thickness is 1.25 mm. The rubber has a modulus of elasticity E = 3,7 MPa and Poisson's ratio v = 0.48. (a) Determine the maximum stress and strain in the ball, (b) If the strain must be limited to 0.425, Find the minimum required wall thickness of the ball.
A brass plate with a modulus of elastici ty E = 16 X 106 psi and Poisson’s ratio a = 0.34 is loaded in biaxial stress by normal stresses r and cry. (sec figure). A strain gage is bonded to the plate at an angle 4 = 350 If the stress o is 10,700 psi and the strain means used by the gageise = 390 X 106.whatisthcmax- imum in-plane shear stress (Tr, ),. and shear strain (>‘ ).? What is the maximum shear strain (y ) in the x-: plane? What is the maximum shear strain (y ).. in the y-r plane?
Two sections of steel drill pipe, joined by bolted flange plates at Ä are being tested to assess the adequacy of both the pipes. In the test, the pipe structure is fixed at A, a concentrated torque of 500 kN - m is applied at x = 0.5 m, and uniformly distributed torque intensity t1= 250 kN m/m is applied on pipe BC. Both pipes have the same inner diameter = 200 mm. Pipe AB has thickness tAB=15 mm, while pipe BC has thickness TBC= 12 mm. Find the maximum shear stress and maximum twist of the pipe and their locations along the pipe. Assume G = 75 GPa.
Solve the preceding problem if F =90 mm, F = 42 kN, and t = 40°MPa
A slightly tapered bar AB of solid circular crass section and length L is supported at end B and subjected to a tensile load P at the free end A. The diameters of the bar at ends A and B are dAand dB. respectively. Determine the length of the bar if the elongation of the bar due to the load P = 45 kips is 0.02 in. Assume that E = 10,400 ksi.
The stresses on an element are sx= 1000 Psi. sy= 500 psi, and txy= 350 psi. Find the stresses acting on an element oriented at an angle 0 = 250. Show these stresses on the rotated element.
Plastic bar of diameter d = 32 mm is compressed in a testing device by a Force P = 190 N that is applied as shown in the figure. (a) Determine the normal and shear stresses acting: on all faces of stress elements oriented at (1 ) an angle 8 = 00, (2) an angle ?? = 22.5s, and (3) an angle ?? = 45°. In each case, show the stresses on a sketch of a properly oriented element. What are smaxtmax (b) Find smax and tmax in the plastic bar if a re-cantering spring of stiffness k is inserted into the testing device, as shown in the figure. The spring stillness is 1/6 of the axial stiffness of the plastic bar.
A thin square plate in biaxial stress is subjected to stresses ?? and ??., as shown in part a of the figure. The width of the plate is h = 12.0 in. Measurements show that the normal strains in the x and v directions are s = 427 × 10-6 and s = 113 × l0-6, respectively. With reference to part b of the figure. which shows a Iwo-dimensional view of the plate. determine the following quantities. (a) The increase .d in the length of diagonal Oil. (b) The change . in the angle between diagonal Oti and the x axis, (c) The shear strain y associated with diagonals Oil and cf(that is. find the decrease in angle ced).