Link BD consists of a single bar 1 in, wide and in. thick. Each pin has a-in. diameter and P- 8 kips. C 6 in.- 12 in. 30 Determine the maximum value of the average normal stress in link BD if 0 = 0. The maximum magnitude of the average normal stress is ksi. This stress is in [(Click to select) v

Link BD consists of a single bar 1 in, wide and in. thick. Each pin has a-in. diameter and P- 8 kips. C 6 in.- 12 in. 30 Determine the maximum value of the average normal stress in link BD if 0 = 0. The maximum magnitude of the average normal stress is ksi. This stress is in [(Click to select) v

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter8: Applications Of Plane Stress (pressure Vessels, Beams, And Combined Loadings)

Section: Chapter Questions

Problem 8.5.11P: The hollow drill pipe for an oil well (sec figure) is 6,2 in. in outer diameter and 0.75 in. in...

See similar textbooks

Related questions

Q: the state of stress at points A and B, and show the results on a differential elements located at…

Q: Link BD consists of a single bar 1 in. wide and in. thick. Each pin has a -in. diameter and P= 8…

Q: Problem 7 A 12-inches square steel bearing plate lies betw een an 8-inches diam eterw ooden postand…

Q: d= 1.50 in. t=0.875 in. P= 7300 lb What is the average bearing stress produced in the support…

Q: The system is initially unstressed but the right support is moved 3 mm to the right whereas the left…

Q: stress of +140 MPa, and a minimum stress of -70 MPa. The R-ratio (minimum stress to maximum stress)…

A: Given data; Mean stress =+140 MpaMinimum stress=-70 MpaTherefore we have to find the R ratio for…

Q: PROBLEM 1 For the assembly shown, determine the displacement of point B and D as the load of 50KN is…

Q: Draw Mohr’s circle that describes each of the following states of stress.

A: The Mohr circle diagram for the respective figures are as follows:

Q: P1-24 The bars A and C shown are made 300 300 0.08 mm of steel (E = 200 GPa), and bar B is made of…

Q: Segments AB and CD of the assembly are solid circular rods. A) What is the normal stress in segment…

Q: Link BD consists of a single bar 1 in, wide andin. thick. Each pin has a -in. diameter and P= 8…

A: Given P = 8 kips To find Average normal stress at angle = 0 Average normal stress at angle = 90

Q: A load of P = 6,100 N acts on the machine part shown. The machine part has a uniform thickness of…

Q: The rigid bar ABC supports a load of 21.1 kN at point C. A circular rod (diameter 25 mm) supports…

A: Given:

Q: H.W: 1 rod as shown in Fig. P-108. Axial loads are applied at the positions indicated. Find the…

Q: H.W.8: Calculate the stresses, if the strains displayed on the lement have been applied. Use all…

A: To obtain the required stresses, we must first determine the principal strains in the element using…

Q: Q1. A compound bar consists of a circular rod of steel of 25 mm diameter rigidly fixéd Into a copper…

A: The given area of the circular rod is given below.

Q: What is the magnitude of the having a radius of curvature o tensile stress of 140 MPa is ar 4.

A: 4. Given Normal stress = 140 MPa Crack length, a = 3.8 x 10-2 mm Radius of…

Q: Consider the figure shown below. The 6000 Ib bar is hinged at Point C. The bar is supported at Point…

Q: A aluminum tank with a wall thickness of 2.2mm and radius of 145mm is 2m long was pressurized to…

Q: a) The normal stress in bar BD is most nearly b) The shear stress in the pin at D is most nearly…

Q: TL eeva-D-- se Ny 10 cm 600 N 'x y- , 14 cm Vertical load is applied to point B of a 10 mm radius…

A: Given data: - The vertical load at B is F = 600 N. The radius of the cylindrical bar is R = 10 mm.…

Q: Calculate the normal stresses (in Pa) at point A of the bracket caused by the 11023 N force. E4.png…

Q: 8. 10 plate 8X10 - S00 pounds of loud material 6061 Aluminum - Determine what type of stress Is…

A: Hf

Q: For the assembly shown, determine the displacement of point B and D as the load of 50KN is applied…

A: Given: load on point D→P=50 KN Length of BD=1m Length of AB=2m Let force in the rod BC=FBC now…

Q: An aluminum tube is rigidly fastened Steel Bronze A. 1000 mm between a bronze rod and a steel rod A…

Q: eter of wires AB and CB. The allowable tensile stress in each wire is 185 Mpa. 30

Q: Calculate the normal stresses (in Pa) at point Bof the bracket caused by the 23010N force. E4.png -…

Q: The assembly shown in figure (5) consists of two posts AD and CF made of a steel (Ast= 1000 mm2, Est…

Q: Q1 :In the following arrangement of structure (fig1) each sold bar has a 36N/m weigh .If the…

Q: 1. A picce of wire 10-in long is tied vertically. The wire has a diameter of 0.1-in and is used to…

Q: (b) Determine the thickness of a plain cylinder head for 0.3m cylinder. The maximum gas pressure is…

Q: 1. The pipe shown below has a 1" outer diameter and a .125" wall thickness. Determine the state of…

Q: Q1. DRAW STRESS STATES いITH A SQLARE ELEMENT エN *Y AXES Label with stress values Q2. DRAW MOHR'S A…

A: Given: Axial load is 200 lbs. Torque applied is 250 lbs-in. Diameter of the rod is 2 in.

Q: If the allowable normal stress is 120MPa and the allowable shear stress is 60MPa, what is the B…

Q: Try One - scene 8 of 8 Pin diameter = 24 mm For the pin connection shown, determine the normal…

A: Write the formula for the normal stress acting on the gross area. σgross=PAgross Here, P is the…

Q: The rectangular bar shown is connected to a support bracket with a 24 mm diameter pin. The width of…

Q: The solid rod shown in Fig. has a radius of 0.75 in. If it is subjected to the force of 800 lb,…

A: Given Data⇒ Diameter of the solid rod(d)=2R d=2×0.75 d=1.5 m Force applied (F)=800 lb…

Q: 4. For a [90/0] laminate given the a, stress profile below, determine: a) N. (k/in) b) M. (k*in/in)…

A: Stress is characterized as the obstruction force acting per unit cross-segment region of the body.…

Q: C 800 mm 18 mm dia. Rectangular bar B D 16 mm thick 25 mm 400 mm A F - F -800 mm

A: Given Data The force given is: 24 kN The height of the complee member is: 1200 mm The thickness of…

Q: Use 32 in2 and 48 in2 cross-sectional areas for tensile and compressive members, respectively.…

A: To find stress in member CD

Q: Fill in the blanks. Draw and label the Mohr’s circle. For sigma-yp = 30 kSf. does this fail? Find…

Q: 5. Segment AB of the bar is a tube with an outer diameter of d1 and a wall thickness of 0.125 in.…

A: Given Allowable stress in rod AB = 3400 psi Outer diameter = d1 Inner diameter = d1 - 0.125…

Q: 2.49. A bar of rectangular cross section 20 mm × 3 mm has a central hole of diameter 6 mm. Find the…

A: We are suppose to solve only one question. Please post other question as a separate question.

Q: An axial force P = 450 kN is applied to the knuckle joint shown with the pin diameter d equal to…

A: Given data An axial force is applied to the knuckle joint P = 450 kN diameter d = 20mm. To…

Q: The solid rod shown in Fig. has a radius of 0.75 in. If it is subjected to the force of 800 lb,…

A: Given: Diameter of the rod (D)=1.5inForce (F)=800lb

Q: Link BD consists of a single bar 1 in. wide and in. thick. Each pin has a -in. diameter and P= 8…

Q: Link BD consists of a single bar 1 in. wide and in. thick. Each pin has a -in. diameter and P- 8…

A: Draw a free body diagram for the problem. Here, Ax and Ay are the reactions at end A, and FBD is…

Q: Determine stress in cylindrical rod of diameter 6 in . Tensile force applied 150 lb

A: Given data : The value of tensile Force=P The value of diameter of cylindrical rod=d To find :…

Q: 0mm wide inside and 30 mm wide outside. Thickness s 60 mm. The crane hook carries a vertical load of…

Concept explainers

Entropy

In physics, entropy means the amount of disorder or the degree of randomness associated with a thermodynamic system. The system is not self-organized when the entropy of the system is high. For instance, when a system is at an elevated temperature, its molecules are in random motion, vibrating and colliding with each other. During this scenario, the probability of finding a molecule at a particular place twice, is low. Under this circumstance, the system can be said to be in a high entropy.

Question

I need both parts solution if u dont know both parts please skip if u give me right ans i surely gives u like

Link BD consists of a single bar 1 in, wide and in. thick. Each pin has a -in diameter and P 8 kips.
6 in.
12 in.
30
Determine the maximum value of the average normal stress in link BD if 0 = 0.
The maximum magnitude of the average normal stress is
ksi. This stress is in (Click to select) v
Determine the maximum value of the average normal stress in link BD if 0=90°.
The maximum magnitude of the average normal stress is
ksi. This stress is in (Click to select) v

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

Two steel rods are welded together (see figure): the seam is oriented at angle ? = 50°. The stresses on the rotated element are sx1=10 ksi, sy1= -12 ksi, and tx1y1= -5 ksi. Find the state of plane stress on the clement if it is rotated clockwise to align the x3 axis with the longitudinal axis of the rods.
Three round, copper alloy bars having the same length L but different shapes are shown, in the figure. The first bar has a diameter d over its entire length, the second has a diameter d over one-fifth of its length, and the third has a diameter d over one-fifteenth of its length. Elsewhere, the second and third bars have a diameter Id. All three bars are subjected to the same axial load P. Use the following numerical data: P = 1400 kN, L = 5m,d= 80 mm, E= 110 GPa. and v = 0.33. (a) Find the change in length of each bar. (b) Find the change in volume of each bar.
Solve the preceding problem if the internal pressure is 3,85 MPa, the diameter is 20 m, the yield stress is 590 MPa, and the factor of safety is 3.0. (a) Determine the required thickness to the nearest millimeter. (b) If the tank wall thickness is 85 mm, what is the maximum permissible internal pressure?
An elevated jogging track is supported at intervals by a wood beam AB (L = 7.5 ft) that is pinned at A and supported by steel rod BC and a steel washer at B. Both the rod (dBC= 3/16 in.) and the washer (dB= 1.0 in.) were designed using a rod tension force of TBC=415 lb. The rod was sized using a factor of safely of 3 against reaching the ultimate stress tru— 60 ksi. An allowable bearing stress sba= 565 psi was used to size the washer at B. A small platform HF is suspended below a section of the elevated track to support some mechanical and electrical equipment. The equipment load is uniform load q = 50 lb/ft and concentrated load WE= 175 lb at mid-span of beam HF. The plan is to drill a hole through beam ABaX £land install the same rod (dBC) and washer) dB) at both D and F to support beam HF. (a) Use s and to check the proposed design for rod DF and washer d,: are they acceptable? (b) Re-check the normal tensile stress in rod BC and bearing stress at 8 if either is inadequate under the additional load from platform HF. Re-design them to meet the original design criteria.
Repeat the previous problem using ? = 50° and stresses on the rotated element: sy1= 70 MPa, ??y1=-82 MPa, and tx1y1=-35 MPa.
A symmetrical framework consisting of three pin-connected bars is loaded by a force P (see figure). The angle between the inclined bars and the horizontal is a = 52°. The axial strain in the middle bar is measured as 0.036. Determine the tensile stress in the outer bars if they are constructed of a copper alloy having the following stress-strain relationship:
Solve the preceding problem if F =90 mm, F = 42 kN, and t = 40°MPa
The hollow drill pipe for an oil well (sec figure) is 6,2 in. in outer diameter and 0.75 in. in thickness. Just above the bit, the compressive force in the pipe (due to the weight of the pipe) is 62 kips and the torque (due to drilling) is 185 kip-in. Determine the maximum tensile, compressive, and shear stresses in the drill pipe.
A steel pad supporting heavy machinery rests on Four short, hollow, cast iron piers (see figure). The ultimate strength of the cast iron in compression in 50 ksi. The outer diameter of the piers is d = 4.5 in, and the wall thickness is t = 0.40 in. Using a factor of safety of 3.5 with respect to the ultimate strength, determine the total load P that can be supported by the pad.
A copper alloy pipe with a yield stress aY= 290 MPa. is to carry an axial tensile load P = 1500 kN (see figure part a). Use a factor of safety of 1.8 against yielding. (a) If the thickness t of the pipe is one-eighth of its outer diameter, what is the minimum required outer diameter dmin? (b) Repeat part (a) if the tube has a hole of diameter dt 10 drilled through the entire tube, as shown in the figure part b.
A pressurized circular cylinder has a sealed cover plate fastened with steel bolts (see figure). The pressure P of the gas in the cylinder is290psi, the inside diameter D of the cylinder is 10.0 in., and the diameter dBof the bolts is 0.50 in. I f the allowable tensile stress in the bolts is 10,000 psi, find the number n of bolts needed to fasten the cover.
An aluminum bar has length L = 6 ft and diameter d = 1.375 in. The stress-strain curse for the aluminum is shown in Fig. 1.34. The initial straight, line part of the curve has a slope (modulus of elasticity) of 10.6 × 106 psi. The bar is loaded by tensile forces P = 44.6 k and then unloaded. (a) That is the permanent set of the bar? (b) If the bar is reloaded. what is the proportional limit? hint: Use the concepts illustrated in Figs. l.39b and 1.40.