nducted on a normally consolidated clay sample and the results are as follows: chamber confirming pressure = 107 kPa, Deviator stress at failure = 95 kPa, Pore Water Pressure = 50 kPa. these results were used to determine the drained friction angle of the soil. Compute the deviator stress in kPa at failure when the drained test was conducted with the chamber confirming pressure changed to 160 kPa

nducted on a normally consolidated clay sample and the results are as follows: chamber confirming pressure = 107 kPa, Deviator stress at failure = 95 kPa, Pore Water Pressure = 50 kPa. these results were used to determine the drained friction angle of the soil. Compute the deviator stress in kPa at failure when the drained test was conducted with the chamber confirming pressure changed to 160 kPa

Principles of Geotechnical Engineering (MindTap Course List)

9th Edition

ISBN:9781305970939

Author:Braja M. Das, Khaled Sobhan

Publisher:Braja M. Das, Khaled Sobhan

Chapter12: Shear Strength Of Soil

Section: Chapter Questions

Problem 12.18P

See similar textbooks

Similar questions

6 A consolidated-undrained tri-axial test was conducted on a normally consolidated clay sample and the results are as follows: Chamber confining pressure = 115 kPa, Deviator stress at failure = 87 kPa, Pore Water Pressure = 56 kPa. These results were used to determine the drained friction angle of the soil. Compute the deviator stress (kPa) at failure when the drained test was conducted with the chamber confining pressure changed to 159 kPa. Round off to two decimal places.
A consolidated-undrained tri-axial test was conducted on a normally consolidated clay sample and the results are as follows: Chamber confining pressure = 110 kPa, Deviator stress at failure = 95 kPa, Pore Water Pressure = 58kPa. These results were used to determine the drained friction angle of the soil. Compute the deviator stress (kPa) at failure when the drained test was conducted with the chamber confining pressure changed to 165 kPa.
A consolidated undrained tri-axial test was conducted on a normally consolidated clay sample and the results are as follows: chamber confining pressure = 110kpa deviator stress at failure = 96kpa pore water pressure = 66kpa these test results were used to determine the drained friction angle of the soil. compute the deviator stress in (kpa) at failure when the drained test was conducted with the chamber confining pressure changed to 163kpa.
Question 15 A consolidated-undrained tri-axial test was conducted on a normally consolidated clay sample and the results are as follows: Chamber confining pressure = 109 kPa, Deviator stress at failure = 98 kPa, Pore Water Pressure = 53 kPa. These results were used to determine the drained friction angle of the soil. Compute the deviator stress (kPa) at failure when the drained test was conducted with the chamber confining pressure changed to 151 kPa. Round off to two decimal places.
: In a tri-axial test of a silty soil, the sample failed at normal stress of 475 kPa and a shear stress of 350 kPa. Which of the following gives the angle of internal friction? Compute the angle that the failure plane makes with the x-axis. Compute the maximum failure stress.
A sample of soil is subjected to direct shear testing at its normal water content. Two test are performed. For one of the test, the sample fails at a shear stress of 144 KN/m2 when the normal stress is 192 KN/m2. In the second test, the sample shears at a stress of 168 KN/m2 when the normal stress is 239.4 KN/m2. From these data, Calculate the following:a) Angle of internal frictionb) Cohesion of soilc) Shearing resistance of the soil at a depth of 3600 mm if it has a unit weight of 16.4 KN/m3.
17. The results of a consolidated drained test for a normally consolidated clay were as follows: chamber confining pressure = 300 Kpa and deviator stress = 400 KPa a. Compute the angle of friction of the clay sample b. Compute the shear stress at failure plane c. Compute the normal stress on the plane of maximum shear.
A drained triaxial test on a normally consolidated clay showed that the failure plane makes an angle of 58° with the horizontal. If the sample was tested with a chamber confining pressure of 103.5 kN/m^2, what was the major principal stress at failure?
A normally consolidated soil was subjected to tri-axial test with the following data: cell pressure= 320 kPa; The specimen failed when the deviator stress is 460 kPa. Compute the shear stress in kPa on the failure plane. Show diagram
A consolidated-undrained triaxial compression test was performed on a normalconsolidated clay sample. During the experiment, the confining pressure was 140 kPa, thedeviator stress was 125 kPa, and the pore water pressure was 75 kPa at the time of failure.According to the information given:i- Find the consolidated-undrained internal friction angle of the clay. ii- Find the drained friction angle of the clay
In a tri-axial test of silty soil, the sample failed at normal stresses of 521 kPa and a shear stress of 200 kPa. Compute the maximum failure stress. a. 781 kPa b. 510 kPa c. 838 kPa d. 812 kPa
In a tri-axial test of normally consolidated clay, the sample subjected to chamber confining pressure of 250 kPa and failed when deviator stress is 350 kPa. Which of the following gives the angle of internal friction? Which of the following gives the shear stress at failure? Which of the following gives the effective normal stress at maximum shear?