Q1/Determine the corrosion rate of carbon steel in salt solution from the following laboratory data. Consider the corrosion rate by a)mpy , b)mdd. AW (g) T (h) 0.0153 0.0290 0.0409 0.055 0.0685 48 96 144 192 240 2 Given: K=3.45*10°, p for carbon steel= 7.86 gm/cm", area = 24.96 cm

Q1/Determine the corrosion rate of carbon steel in salt solution from the following laboratory data. Consider the corrosion rate by a)mpy , b)mdd. AW (g) T (h) 0.0153 0.0290 0.0409 0.055 0.0685 48 96 144 192 240 2 Given: K=3.45*10°, p for carbon steel= 7.86 gm/cm", area = 24.96 cm

Fundamentals Of Analytical Chemistry

9th Edition

ISBN:9781285640686

Author:Skoog

Publisher:Skoog

Chapter22: Bulk Electrolysis: Electrogravimetry And Coulometry

Section: Chapter Questions

Problem 22.28QAP

See similar textbooks

Similar questions

A chemical engineering student is studying the effect of pH on the corrosion of iron. Ellie following data are collected: Corrosion Rate (mm/year) ph 0.03 13.00 0.06 12.00 0.16 11.00 0.22 10.00 0.25 9.00 0.25 8.00 0.25 7.00 0.25 6.00 0.25 5.00 0.27 4.00 0.37 3.00 0.38 2.80 0.63 2.80 1.00 2.80 Plot corrosion rate vs. pH. (HINT: Label the x axis with decreasing pH.) (a) How would you describe the dependence of corrosion on pH? (b) When the pH goes below 3, bubbles appear in the solution. What change takes place in the reduction half-reaction at low pH? (c) How do you explain the shape of the curve at the lowest pH? (Based on a graph in the Kirk-Otbmer Encyclopedia of Chemical Technology, 4th ed., vol 7. New York: John Wiley & Sons, p. 559.)
Determine the corrosion rate ( mpy ) of steel corresponding to 1µA / cm? of current. Following is the composition of alloys. Cr = 21%, density = 7.1 g/ cm', At.wt. = 52.01 g /mol, number of electron = 1 Ni = 8%, density = 8.9 g/ cm', At.wt. = 58.68 g /mol, number of electron = 2 Fe = 70%, density = 7.86 g/ cm', At.wt. = 55.85 g /mol, number of electron = 2 Note : Faradays constant = 96500 coulombs per mole of electrons. C= constant which includes F and any other conversion factor for unites, for instance, C = 0.129 when corrosion rate is in mpy.
A thin film of zinc is to be deposited on one side of a steel sheet. Determine the zinc film thickness per 1cm2 of steel sheet if 2 A current was used and the electrolytic deposition process was done for exactly 30 minutes at 25oC. The zinc solution has a concentration of 1 M and can be assumed to be constant throughout the process. pls explain the solution shown in the figure thoroughly or you can come up with your own thank you
In some voltametric experiments, microelectrodes are used in the absence of a supporting electrolyte or the so-called direct skin-electrodes contact. What property of microelectrodes makes this possible? What does “immunity of microelectrodes to ohmic drop” mean?
A steel sheet will have a thin layer of zinc put on one side to protect it from corrosion. Determination of the zinc film thickness per one centimeter square of steel sheet when a 2 A current is employed and the electrolytic deposition process is completed in exactly 30 minutes at 25 degrees Celsius. With a 1 M zinc solution, it's safe to presume that its concentration will remain stable throughout the process.
1. Purification of chromium can be achieved by electrorefining chromium from an impure chromium anode onto a pure chromium cathode in an electrolytic cell. How many hours will it take to plate 15.5 kg15.5 kg of chromium onto the cathode if the current passed through the cell is held constant at 42.0 A42.0 A? Assume the chromium in the electrolytic solution is present as Cr3+Cr3+.
It is desired to assemble a concentration cell with a potential of 120 mV withtwo Zn(s) electrodes immersed, each one, in a ZnSO4 solution. What should be theratio between Zn2+ activities in the two electrodes to reach the desired potential?
The maximum corrosion current density in a steel sheet coated with zinc and exposed to seawater is found to be 5 mA/m². What thickness of the layer is necessary so that the coating may last for one year?
Chromium is diffused into steel at 980o C to increase its corrosion resistance. If during the diffusion the surface concentration of chromium is maintained constant, how long will it take to achieve 1.8% of the surface concentration at a depth of 0.002 cm below the steel surface? Express your answer in seconds. The diffusivity has a pre-exponential term equal to 0.54 cm2/s and an activation energy of 286 kJ/mole.
1. For an electrochemical copper reduction reaction at 25oC and 101 kPa, calculate (a) the Gibbs free energy change △Go as the driving force, (b) the equilibrium constant K and (c) the copper ion concentration [Cu2+] in g/L. Consider the cathodic reaction only and assume [Cu]=1mol/L. I'm only need 1-c solution with 'Nernst Equation' How can I solve the problem that consider the cathodic reaction only
Calculate the required voltage (V) if an unknown metal (M) was electrodeposited from an aqueous solution containing M2X1 (where X is the anion) with a supplied current of 4.98 A for 11 h, consuming 0.1145 kWh of electrical energy. Assume that the current efficiency is 93%. (Input values only with 2 decimal places
Black-and-white photographic film is coated with silver halides. Because silver is expensive, the manufacturer monitors the Ag⁺ content of the waste stream, [Ag⁺]ᵥᵥₐₛₜₑ, from the plantwith an Ag-selective electrode at 25°C. A stream of known Ag⁺ concentration, [Ag⁺](standard), is passed over the electrode inturn with the waste stream and the data recorded by a computer.(a) Write the equations relating the nonstandard cell potential tothe standard cell potential and [Ag⁺] for each solution.(b) Combine these into a single equation to find [Ag⁺]ᵥᵥₐₛₜₑ.(c) Rewrite the equation from part (b) to find [Ag⁺]ᵥᵥₐₛₜₑ in ng/L.(d) If Eᵥᵥₐₛₜₑ is 0.003 V higher than E(standard), and the standard so-lution contains 1000. ng/L, what is [Ag⁺]ᵥᵥₐₛₜₑ?(e) Rewrite the equation in part (b) to find [Ag⁺]ᵥᵥₐₛₜₑ for a sys-tem in which T changes and Tᵥᵥₐₛₜₑ and T(standard) may be different.