Part A Antireflection coatings can be used on the inner surfaces of eyeglasses to reduce the reflection of stray light into the eye, thus reducing eyestrain. A 90-nm-thick coating is applied to the lens. What must be the coating's index of refraction to be most effective at 480 nm? Assume that the coating's index of refraction is less than that of the lens. ? Submit Request Answer Part B If the index of refraction of the coating is 1.38, what thickness should the coating be so as to be most effective at 4 The thinnest possible coating is best.

Part A Antireflection coatings can be used on the inner surfaces of eyeglasses to reduce the reflection of stray light into the eye, thus reducing eyestrain. A 90-nm-thick coating is applied to the lens. What must be the coating's index of refraction to be most effective at 480 nm? Assume that the coating's index of refraction is less than that of the lens. ? Submit Request Answer Part B If the index of refraction of the coating is 1.38, what thickness should the coating be so as to be most effective at 4 The thinnest possible coating is best.

University Physics Volume 3

17th Edition

ISBN:9781938168185

Author:William Moebs, Jeff Sanny

Publisher:William Moebs, Jeff Sanny

Chapter3: Interference

Section: Chapter Questions

Problem 12CQ: An inventor notices that a soap bubble is dark at its thinnest and realizes that destructive...

See similar textbooks

Similar questions

Suppose you have a lens system that is to be used primarily for 700-nm red light. What is the second thinnest coating of fluorite (magnesium fluoride) that would be nonreflective for this wavelength?
A camera uses a lens with aperture 2.0 cm. What is the angular resolution of a photograph taken at 700 nm wavelength? Can it resolve the millimeter markings of a ruler placed 35 m away?
If a microscope can accept light from objects at angles as large as =70 , what is the smallest structure that can be resolved when illuminated with light of wavelength 500 nm and (a) the specimen is in air? (b) When the specimen is immersed in oil, with index of refraction of 1.52?
Check Your Understanding Although m, the number of fringes observed, is an integer, which is often regarded as having zero uncertainty, in practical terms, it is all too easy to lose track when counting fringes. In Example 3.6, if you estimate that you might have missed as many as five fringes when you reported m=122 fringes, (a) is the value for the index of refraction worked out in Example 3.6 too large or too small? (b) By how much?
A Michelson interferometer with a He-Ne laser light source (=632.8nm) projects its interference pattern on a screen. If the movable mirror is caused to move by 8.54 m , how many fringes will be observed shifting through a reference point on a screen?
The analysis shown below also applies to diffraction gratings with lines separated by a distance d. What is the distance between fringes produced by a diffraction grating having 125 lines per centimeter for 600-nm light, if the screen is 1.50 m away? (Hint: The distance between adjacent fringes is y=x/d , assuming the slit separation d is comparable to ?.)
A telescope can be used to enlarge the diameter of a laser beam and limit diffraction spreading. The laser beam is sent through the telescope in opposite the normal direction and can then be projected onto a satellite or the moon. (a) If this is done with the Mount Wilson telescope, producing a 2.54-m-diameter beam of 633-nm light, what is the minimum angular spread of the beam? (b) Neglecting atmospheric effects, what is the size of the spot this beam would make on the moon, assuming a lunar distance of 3.84108 m?
An inventor notices that a soap bubble is dark at its thinnest and realizes that destructive interference is taking place for all wavelengths. How could she use this knowledge to make a nonreflective coating for lenses that is effective at all wavelengths? That is, what limits would there be on the index of refraction and thickness of the coating? How might this be impractical?
A He-Ne laser beam is reflected from the surface of a CD onto a wall. The brightest spot is the reflected beam at an angle equal to the angle of incidence. However, fringes are also observed. If the wall is 1.50 m from the CD, and the first fringe is 0.600 m from the central maximum, what is the spacing of grooves on the CD?
Check Your Understanding For the experiment described in Example 4.7, what are the two other angles where interference maxima may be observed? What limits the number of maxima?
Two microscope slides made of glass are illuminated by monochromatic (=589nm) light incident perpendicularly. The top slide touches the bottom slide at one end and rests on a thin copper wire at the other end, forming a wedge of air. The diameter of the copper wire is 29.45 m . How many bright fringes are seen across these slides?
If a hologram is recorded using monochromatic light at one wavelength but its image is viewed at another wavelength, say 10% shorter, what will you see? What if it is viewed using light of exactly half the original wavelength?