Q.1 A simply supported beam of span 2 mcarries a uniformly distributed load of140KN/m over the whole span. The crosssection of the beam is a T section with flangewidth of 120 mm, web and flange thickness of20 mm and overall depth of 160 mm.Determine the maximum shear stress in thebeam and draw the shear stress distributionfor the section. (2.5 M) 120- 53.08 90 160 140Y (mm) 20 Answer:

givenlength of span L=2muniformly distributed load intensity W=140kN/mcross section of beam is T…

Q.1 A simply supported beam of span 2 m carries a uniformly distributed load of 140KN/m over the whole span. The cross section of the beam is a T section with flange width of 120 mm, web and flange thicknes of 20 mm and overall depth of 160 mm. Determine the maximum shear stress in the beam and draw the shear stress distribution for the section. (2.5 M) 120- 53.0890 160 140

Q.1 A simply supported beam of span 2 m carries a uniformly distributed load of 140KN/m over the whole span. The cross section of the beam is a T section with flange width of 120 mm, web and flange thicknes of 20 mm and overall depth of 160 mm. Determine the maximum shear stress in the beam and draw the shear stress distribution for the section. (2.5 M) 120- 53.0890 160 140

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

An I section symmetrical beamhas 200mm wide flange and overall depth of 500mm. Each flange is 25mm thickand the web is 20mm thick. Determine the maximum bending moment that should be imposed in the sectionif the tensile or the compressive stressis not to exceed 40MN/m^2 and what percentage of the moment is resisted by flange or web?
For the beam showna. Determine the maximum flexural stress P = 6kN W0 = 4 kN/m a = 8/10 m
A loaded beam, 60 mm wide by 100 mm high and 6 m long, has the shear and moment diagrams as shown below. Determine (a) the magnitude, type and location of the maximum flexural stress (in MPa) (b) the stress (specify the type) in a fiber 30 mm from the top of the beam at a section 3.5 m from the left end. I = bh3/12
A beam carries a uniform distributed load of intensity w in N/m. It was determined that Vmax = 7.5w N, (+)Mmax = 5.2w N-m, (-)Mmax = 4.5w N-m. From the given cross section shown, ytop = 64.183 mm, ybot = 135.817 mm, and INA = 25.059 x 10 6 mm4. The allowable stresses are as follows: σfT = 30 MPa, σfC = 60 MPa, and τ = 10 MPa. a. The safe uniform load considering tensile flexural strees is _____N/m b. The safe uniform load considering compressive flexural stress is _____ N/m. c. The moment inertia of the area about the neutral axis is _____ mm^3. d. The safe uniform load considering maximum shear force is _____ N/m e. Based on your analysis, the safe uniform load to recommend is _____ N/m.
If a beam has a rectangular cross section of heigh 300mm and width 60mm. In one cross section plane the beam experiences a shear force of 2x10^6 N. How do I work out the; 1 - shear stress at neutral axis 2 - the bottom surface 3 - 20mm from the top surface
Let’s consider an overhanging beam subjected to a uniform (rectangular) load with intensity 4 kN/m. The shear diagram is shown by: 4kN/m
Beam cross section is shown below. If a resultant shear force, V acting at the beam cross section is 40 kN, (a) Determine the shear stress due to bending at points C (b) Sketch the shear stress distribution over the beam cross section and describe the shear stress pattern at the interface between flange and web. Given I NA = 301.3 x 10-6 m4
The channel beam with b= 300 mm, h=150 mm, and constant thickness of t=15 mm is subjected to a shear of V=15 kN. Calculate the maximum shear stress of the beam.
A beam having a T shaped section is subjected to a vertical shear force of V = 10,000 N. The cross sectional dimensions are flange width, bf = 100mm, flange thickness tf = 25mm, gross depth of h = 200 mm and web thickness of 25 mm. Determine the maximum shear stress in the flange.
beam carries a concentrated load (10 KN) and a total uniformly distributed load of (5 KN/m) as shown in Fig .Determine the maximum tensile and compressive bending stresses developed in the beam if the T- section is inverted.
A beam has the singly symmetrical thin-walled cross section shown in the figure. The thickness t of the wall is constant throughout. Show that the distance of the shear center from the web is given by d pzsinrxcosa Sy = md ey 14+6p+2p°sin“a where p=d/h
The steel beam has an allowable bending stress sallow = 140 MPa and an allowable shear stress of tallow = 90 MPa. Determine the maximum load that can safely be supported.