äbäi 50توحد الاجابات وترسل ضمن ملف PDF واحد متعد دالصفحات في نهاية الاسئلةQ1: A pump used for delivering waterfrom a tank as shown in the figure. If it is0.1 m dia.Mrequired to deliver 60 L/s of water throughPumpa 10 cm diameter pipe from the tank to apoint 10 m above, determine the pumppower required. Also, find the pressure atpoints L and M. All required dimensionsare illustrated on the figure and assume anoverall pump efficiency of 70%.Waterإجابتك

Power Required by Pump is Solved here. For the Other Part, Please post this question again.

Q1: A pump used for delivering water from a tank as shown in the figure. If it is -0.1 m dia. M required to deliver 60 L/s of water through a 10 cm diameter pipe from the tank to a Pump point 10 m above, determine the pump power required. Also, find the pressure at points L and M. All required dimensions are illustratedon the figure and assume an overall pump efficiency of 70%. Water

Q1: A pump used for delivering water from a tank as shown in the figure. If it is -0.1 m dia. M required to deliver 60 L/s of water through a 10 cm diameter pipe from the tank to a Pump point 10 m above, determine the pump power required. Also, find the pressure at points L and M. All required dimensions are illustratedon the figure and assume an overall pump efficiency of 70%. Water

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A 2-in water jet with a velocity of 130 fps strikes a single vane moving in the same direction of the jet at a velocity of 50 fps. Determine the volumetric flow rate of the water that hits the vane in cfs.
A pump is used to increase the pressure of water from 105 kPa to 800 kPa at a rate of 160 L/min. If the shaft power input to the pump is 3 kW, the efficiency (expressed in decimals, such as 0.25; don't write 25%) of the pump is ?
What are the frictional losses to be considered when calculating power consumption of a pump under operation?
2. A pump draws water from a lake delivered to a height of 50 meters above the lake and encounters 15 meters of headloss. Determine the pump power requirement in Kilo-Watts to deliver a constant supply of 500 Liters per second? The correct answer has a margin of 1 from exact answer. Velocity head is neglected.
A pump can deliver 5 cubic meters per minute of water to a height of 50 meters. If the pump has an efficiency of 85.5% and is coupled from a motor with rotational speed of 25 revolutions per second, calculate the torque in lb-ft delivered by the shaft. a. 242.4b. 224.4c. 244.2d. 424.2
kindly help me with this problem INSTRUCTIONS: Solve the problems neatly and systematically. SUse free-floating decimals in all your calculations and in expressing your answers. Box your final answers. 5. In reference to problem number 1, if another pump was used having a power requirement of 12 hP with an efficiency of 73% in pumping the water at 1.2 ft3/s through a constant diameter of a pipe. Determine theirreversible head loss of the piping system in ft of water if the free surface of the pool was at 35 ft?
The motor of the pimp consumes 1.05 hp of electricity. The pump increases the pressure of water from 120 kPa to 1100 kPa at a rate of 35 L/min. If the motor efficiency is 95%, the pump efficiency is CHOICES: a.0.85 b.0.88 c.0.78 d.0.75
For each statement, choose whether the statement is true or false, and discuss your answer briefly: (a) If the rpm of a pump is doubled, all else staying the same, the capacity of the pump goes up by a factor of about 2. (b) If the rpm of a pump is doubled, all else staying the same, the net head of the pump goes up by a factor of about 2. (c) If the rpm of a pump is doubled, all else staying the same, the required shaft power goes up by a factor of about 4. (d) If the rpm of a turbine is doubled, all else staying the same, the output shaft power of the turbine goes up by a factor of about 8.
A centrifugal pump delivers 25 liters of water per second against a head of 10 meters and running at 1300 rpm requires 10 kW of power. Determine the discharge, head of the pump and power required if the pump runs at 1500 rpm. (Ans. 0.0288cumec or 1.73 cu.m./min , 13.31m, 15.36kw)
The power developed by the pump is 30kw. What is the percent decrease in power if speed will decrease by 40%. ANSWER: 78.4%
A water tank has a leak at the bottom which causes the water surface to drop from elevation 5.88 to elevation 5.57 in a period of 14 hours. If no water other than the leaking water is either added or drained from the tank and the bottom of the tank is at elevation 1 m. What will be the elevation of the water surface in the tank after a week (starting from elevation 5.88) in m?
How high must the pump centerline be located above the water level in an open tank that supplies water to the pump if it requires a minimum of 2.5m of NPSH? The barometer reading is 760mmHg, the pipe friction is 0.65m and the vapor pressure is 3.51kPa. 6.82m 5.48m 7.39m 4.99m