Q2: A curved path has banked angle 12° and 30 m radius of rotation was designed for four-wheeled Trolley of total mass 2500 kg to move on track of 1 m gauge at 35 km/hr. For this vehicle all wheels have an external diameter of 0.5 m and each pair of axle weight is 1800 N and radius of gyration of 0.2 m. The center of gravity is located 1 m above the groun level. Within this mechanism, determine the limited pressure on each rail.

Q2: A curved path has banked angle 12° and 30 m radius of rotation was designed for four-wheeled Trolley of total mass 2500 kg to move on track of 1 m gauge at 35 km/hr. For this vehicle all wheels have an external diameter of 0.5 m and each pair of axle weight is 1800 N and radius of gyration of 0.2 m. The center of gravity is located 1 m above the groun level. Within this mechanism, determine the limited pressure on each rail.

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter4: Coplanar Equilibrium Analysis

Section: Chapter Questions

Problem 4.124P: The automobile, with center of gravity at G, is parked on an 18 slope with its brakes off. Determine...

See similar textbooks

Similar questions

A uniform rod of mass M = 2.3 kg and length L = 0.2 m, lying on a frictionless horizontal plane, is free to pivot about a vertical axis through one end, as shown. The moment of inertia of the rod about this axis is given by 1/3 ML2. If a force F = 7 N, q = 47° acts as shown, what is the resulting angular acceleration (in rad/s2) about the pivot point?
Consider a disc of mass, M with radius 0.5 m on a slope with angle 45 degrees to the horizontal. It has a good grip on the slope and does not slip. The disc is constructed so that its mass per unit area, ρ(r) = r1/2 kg m−2, with r being the radial distance in metres from the axis of the disc. What is the equation describing the linear acceleration of the centre of mass of the disc down the slope in terms of the angular acceleration of the disc.
Plunger (weightless) Area is 0.003 m² piston mass 1000 kg , area of piston is 0.3 m² density of oil is 750 kg/m³ determine force on Plunger required for equilibrium
A 20 kg cylindrical disk with a height of 0.10 meter and a radius of 0.30 meter lies stationary on level floor. Three forces of different magnitude are exerted towards the center of mass of the cylindrical tank, making it accelerate at 2 m/s2 . If the magnitude of the forces is: A = 120 N, B = 140 N, C = 130 N, what angles should they make with each other to prevent the cylindrical disk from accelerating.
The frame of a gyroscope in fig. is supported at O so that it can turn freely in alldirections. The wheel is a uniform disc of 10 cm diameter weighing 2 kg with its centre20 cm from O. The frame alone weighs 1 kg with centre of gravity G1, 12 cm from O.If the wheel spins as shown at 10,000 r.p.m. with its axle in the horizontal plane, findthe time required for the axle to make one revolution about O. Mention the direction ofthis rotation. Find also the vertical and horizontal forces by the support on the frame.
Solve it correctly please. I will rate accordingly with 4votes. A 275-N solid sphere rests on a 35-degree inclined plane from thehorizontal. If the sphere has a diameter of 30 cm, calculate themagnitude of a horizontal force P passing through the center of thesphere and the reaction force of the inclined plane in order tomaintain the sphere at rest.
A, B, C and D are four masses carried by a rotating shaft at radii 100mm, 150mm, 150mm and 200mmrespectively. The planes in which the masses rotate are spaced at 500mm apart and the magnitude ofthe masses B, C and D are 9kg, 5kg and 4kg respectively. Find the required mass A and the relativeangular settings of the four masses so that the shaft shall be in complete balance.
A machine part has the shape of a solid uniform sphere of mass 220 gg and diameter 3.50 cmcm . It is spinning about a frictionless axle through its center, but at a point at the top of the sphere, it is scraping against metal, resulting in a friction force of 0.0200 NN at that point. Find the angular acceleration of the sphere, including the direction (a positive value would indicate the +z direction and a negative value would indicate the -z direction).
A sphere of mass M and radius R is not necessarily solid or hollow. It has moment of inertia I= cMR2. As shown in the figure, the sphere starts from rest and rolls without slipping down a ramp from height H. It then moves back up the other side, but now with no friction at all between the sphere and the ramp. What height does the sphere reach?
Area moment is the measure of a body’s resistance to angular acceleration about a given axis. True of False? Please provide an explanation.
Consider a disc of mass M with a radius of 0.5 m that is lying on a slope at a 45-degree angle to the horizontal. It grips the hill well and does not slide. The disc is designed in such a way that its mass per unit area, (r), equals r1/2 kg m2, where r is the disc's radial distance in metres from its axis. Calculate the disk's mass.
Find: friction force between the spool and the ground. and the UNIT of measurement of the acceleration of the mass center of the spool