Q2) A rectangular block of an elastic material is subjected to normal and shear loads. The deformed (distorted) shape of the block is shown by the dashed lines. Determine the shear strain Yxy at corners D and C. Also find the average normal strain that occurs along the diagonal's AC and DB. 4 mm 2 mm 4 mm 2 mm; 300 mm 2 mm х D A| 500 mm- 3 mm

Q2) A rectangular block of an elastic material is subjected to normal and shear loads. The deformed (distorted) shape of the block is shown by the dashed lines. Determine the shear strain Yxy at corners D and C. Also find the average normal strain that occurs along the diagonal's AC and DB. 4 mm 2 mm 4 mm 2 mm; 300 mm 2 mm х D A| 500 mm- 3 mm

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Sigma x is 100MPa Sigma y is -60 Mpa Txy is -48 MPa Use Mohr circle to find normal and. Shear stress when it is rotated 25 as shown in figure
The strain components εx, εy, and γxy are given for a point in a body subjected to plane strain. Using Mohr’s circle, determine the principal strains, the maximum in-plane shear strain, and the absolute maximum shear strain at the point. Show the angle θp, the principal strain deformations, and the maximum in-plane shear strain distortion in a sketch.εx = 310 με, εy = -530 με, γxy = -820 μrad. Enter the angle such that -45°≤θp≤ +45°.
In the image, w = 300 N/m. a) Determine the shear force at point E of the frame. Express your answer to three significant figures and include the appropriate units.
Using Mohr's circle, determine the stresses acting on an oriented element An Angle Θ from the x-axis, show those stresses on an element oriented at that Angle Θ Θ = positive (+) when rotated counterclockwise Θ = negative (-) clockwise. Also determine the principal normal stresses and the maximum shear stress, and draw an element with the orientation of these. data to use σx= 33 MPa σy= - 9 MPa τxy= 29 MPa Θ=35°
A downward load of Q = 33 kN is applied to rigid bar ABD as shown in the sketch. Axial member CDE is subjected to a downward load of P = 27 kN at joint E plus a force at joint D from the rigid bar. The axial member has an elastic modulus of E = 69 GPa and a cross-sectional area of A1 = A2 = 145 mm2. Assume that a = 390 mm, b = 220 mm, c = 630 mm, and d = 490 mm. Determine the vertical displacement of joint E. Draw a free body diagram of rigid bar ABD, and determine the magnitude of the vertical reaction force at pin D.Answer:D = kN
solve for deformation in figure B. given V= 10-0 and area = 2.0in^2
Using virtual work method, find: (a) the real internal force F in member BF in kN (b) real internal force F in member GH in kN (c) virtual internal force Fv in member HG due to a one unit horizontal load applied at joint G (d) virtual internal force Fv in member CD due to a one unit horizontal load applied at joint G (e) horizontal displacement at joint G due to the applied loads in mm.
Solve for: a. reaction forces b. shear and momendiagram c. value of maximum deflection d. moment of inertia [Ix, ly, centroids (xbar & ybar)] e. maximum shear stress f. maximum bending stress g. maximum tensile h. maximum compressive
The flexural rigidity, EI, is constant from point A to point D. Use point A as the origin for the x and y axes. Always use 3 decimal place in your final answer if it is not whole number. (Macaulay's Method)What is the slope at point A? in terms of 1/EIWhat is the deflection at point B? in terms of 1/EIWhat is the deflection at point C? in terms of 1/EIWhat is the reaction at the hinge support A? in kN (use 3 decimal places)What is the slope at point D? in terms of 1/EIWhat is the reaction at the roller support D? in kN (use 3 decimal places)
Analyze by moment distribution. Modify stiffness as discussed in Section 11.5. E is con- stant. Draw the shear and moment curves.
The beam shown in the figure has a slidingsupport at A and a roller support at B. The slidingsupport permits vertical movement but no rotation.Derive the equation of the def lection curve anddetermine the deflection δA at end A and also δC atpoint C due to the uniform load of intensity q =P / Lapplied over segment CB and load P at x =L / 3. Usethe second-order differential equation of the deflectioncurve.
Draw the shear force and bending moment diagram of the beam. Draw the distribution of normal stress and shear stress in the cross section of the beam at the B support. q(t/m)10 b(mm)60 h(mm)550 t(mm)40