Question 1/13 Answer is mandatory A load Z draws 12 kW at a power factor of 0.707 lagging from a 230 Vrms and 50 Hz sinusoidal source. If it is aimed to raise the power factor to 0.95 power factor lagging using a capacitor connected in parallel to the load, then the capacitance value (in uF) is: O 444.3 242.4 484.7 969.4 888.6

Question 1/13 Answer is mandatory A load Z draws 12 kW at a power factor of 0.707 lagging from a 230 Vrms and 50 Hz sinusoidal source. If it is aimed to raise the power factor to 0.95 power factor lagging using a capacitor connected in parallel to the load, then the capacitance value (in uF) is: O 444.3 242.4 484.7 969.4 888.6

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter2: Fundamentals

Section: Chapter Questions

Problem 2.27P: An industrial load consisting of a bank of induction motors consumes 50 kW at a power factor of 0.8...

See similar textbooks

Similar questions

The power factor for an inductive circuit (R-L load), in which the current lags the voltage, is said to be (a) Lagging (b) Leading (c) Zero
An industrial load consisting of a bank of induction motors consumes 50 kW at a power factor of 0.8 lagging from a 220-V,60-Hz, single-phase source. By placing a bank of capacitors in parallel with the load, the resultant power factor is to be raised to 0.95 lagging. Find the net capacitance of the capacitor bank in F that is required.
Consider a single-phase load with an applied voltage v(t)=150cos(t+10)volts and load current i(t)=5cos(t+50)A. (a) Determine the power triangle. (b) Find the power factor and specify whether it is lagging or leading. (c) Calculate the reactive power supplied by capacitors in parallel with the load that correct the power factor to 0.9 lagging.
If the rms phasor of a voltage is given by V=12060 volts, then the corresponding v(t) is given by (a) 1202cos(t+60) (b) 120cos(t+60) (c) 1202sin(t+60)
An industrial installation has a power factor of 0.85 in backward. The demand is 150 KVA, and the operating voltage is 4800 V at 60 Hz. What should be done to bring the power factor to 0.95 in lagging? Indicate what you would connect and with what three-phase power. If the connection of the element to be added is in delta, indicate its reactance and the value of its capacitance or inductance. capacitance or inductance.
The line voltage on a 146 kW 0.7 PF lagging load is 480 Vrms. Find the value of the capacitance that when placed in parallel with the load will raise the power factor to 0.9 lagging for a frequency of 50 Hz
A transmission line with impedance of 0.085 + j 0.32 Ω is used to deliver power to a load. The load is inductive and the load voltage is 200∠0° Vrms at 60Hz. If the load operates at 20 kVA with a power factor of 0.75 determine the real and quadrature power losses in both the load and the line and the source voltage phasor.
A sigle-phase inductive load feeding from a 4,600 V rms supply, absorbs 600 kW at a laggingpower factor of 0.9. Determine the reactive power drawn by the load as well as R and X(a) if the load consists of R and X in series;(b) if the load consists of R and X in parallel.
If a current 5.0 A lags the applied voltage 230 V by an angle ϕ, it can be resolved into two components, OA in phase with the voltage and OB lagging by 90°. If the phasor diagram in to a circuit possessing resistance and inductance in series, OA and OB must not be labelled and respectively. It has become the practice to say that the power factor is laggingwhen the current lags the supply voltage, and leading when the current leads the supply voltage. This means that the supply voltage is regarded as the reference quantity. (a) A 30 μ F capacitor is connected across the applied voltage, 50 Hz supply. Calculate the reactance of 30 μ F capacitor connected across applied voltage (b) the reactance of the capacitor; (c) the current.
Between the terminals a and b in the figure, there is a load formed by connecting the resistor R0 and inductance L0 in series. The amplitude of the voltage Vs (t) is √2 150 volt phase angle Qs = 0 degree period T = 200π microseconds. Since R = 300ohm and C = 1 microfarad A) If the load phase angle QL = 30 degrees, find the values of R0 and L0 that enable the load to draw the maximum average power from the circuit. =? B) Calculate the average power on the load. =?
Given the following equation i = -4 sin(377t + 65°) and e = 5 cos(377t + 190°). Draw the phasor diagram and solve for the following: a. Element present in the circuitb. Power factorc. Real Power in RMS *round the final answer to four decimal places and label it with correct units.
An industrial consumer has a load pattern of 2000 kW 0.8 lag for 12 hours and 1000 kW unity power factor for 12 hours. The load factor is ?