Please help in all three subparts. I will definitely rate Question (2):An element in plane stress at the surface of a large machine is subjected to stresses σx = 15,000 psi,dy = 5,000 psi, and ↑ Txy = 4,000 psi, as shown. Using Mohr's circle, determine the followingquantities: (a) the stresses acting on an element inclined at an angle 0 = 40 ccw, (b) the principalstresses, and (c) the maximum shear stresses.5,000 pi4,000 psi15,000 psi

Answered: Image /qna-images/answer/af435765-ff88-4bad-988c-58e0d943e4df.jpg

Question (2): = An element in plane stress at the surface of a large machine is subjected to stresses ox= 15,000 psi, dy = 5,000 psi, and 1 Txy 4,000 psi, as shown. Using Mohr's circle, determine the following quantities: (a) the stresses acting on an element inclined at an angle 0= 40' ccw, (b) the principal stresses, and (c) the maximum shear stresses. 5,000 pi 4,000 psi 15,000 pai

Question (2): = An element in plane stress at the surface of a large machine is subjected to stresses ox= 15,000 psi, dy = 5,000 psi, and 1 Txy 4,000 psi, as shown. Using Mohr's circle, determine the following quantities: (a) the stresses acting on an element inclined at an angle 0= 40' ccw, (b) the principal stresses, and (c) the maximum shear stresses. 5,000 pi 4,000 psi 15,000 pai

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A cylindrical storage tank contains liquefied propane under a pressure of 1.5 MPa (gage pressure P=1.5 MPa) and is subjected to an axial force F=60 kN. Knowing that the tank has an inner diameter of 320 mm and a wall thickness of 3 mm, find the principal stresses and determine the maximum shear stress.
A body is subjected to a direct tensile stress of 300 MPa in one plane accompained by a simple shear stress of 200 MPa. Determine maximum normal stress on the plane.
1.A cylindrical pressure vessel is 500 mm in diameter and has a wall thickness of 22 mm. If it is subjected to an internal pressure of 5 MPa, determine the tangential and longitudinal stresses developed in the cylinder.
A cylindrical tank steel pressure vessel 200mm in radius and 4.0m in length, is subjected to an internal pressure of 3.0 MPa. Determine the thickness of tank (nearest mm) if the following stresses are not to be exceeded: tangential stress of 45 MPa and longitudinal stress of 30 MPa. and also show the free body diagram
Problem 2A set of stresses applied on the 50-mm x 50-mm ABCD plate cause the plate to deform as shownwhere both sides AC and D'B' remain horizontal. a) Find the average axial strain of side AC, AD and BC of the plate b) Find the shearing strain at each of the corners A,B,C and D
A cylindrical pressure vessel is fabricated from steel plating that has a thickness of 30 mm. The outer diamter and thickness of the pressure vessel is 500 mm and 10 mm. Its length is 2m. Determine the maximum internal pressure (MPa) that can be applied if the longitudinal stress is limited to 155 MPa, and the circumferencial stress is limited to 55 MPa.
A cylindrical steel pressure vessel has an inner radius of 24 inches and wall thickness of 0.25 inches. Determine the tangential and longitudinal stresses when the vessel is pressurized to 125 psi.
For a steel rod with a circular cross section with a diameter of D = 20 mm, the following is required: 1. Draw a diagram of the longitudinal force 2. Draw a diagram of normal stresses 3. Determine the total elongation of the rod if Е = 2∙10^5 MPa When calculating, take: а = 2 m, b =1.2 m, F=10 кN - The point of application of force! The work must be done on one sheet of A4 paper, which must show: - Using the method of sections to determine the longitudinal forces in the rod. - Draw a diagram of longitudinal forces N - Determination of normal stresses based on the constructed plot of longitudinal forces. - Draw diagram a normal stresses - Determination of the full extension of the rod
A seamless cylinder of storage capacity of 0.03m3 is subjected to an internal pressure of 21 MPa. The allowable stress in the material of cylinder is 350N/mm².Determine the length of the cylinder if it is twice the diameter of the cylinder.8mm A seamless cylinder of storage capacity of 0.03mᵌis subjected to an internal pressure of 21MPa. The ultimate strength of material of cylinder is 350N/mm².Determine the length of the cylinder if it is twice the diameter of the cylinder.540mm
A bar of rectangular section shown in is subjected to stresses σx, σy and σz in x, y and z directions respectively. Show that if sum of these stresses is zero, there is no change in volume of the bar.
The stresses shown act at a point in a stressed body. Assume stress magnitudes of Sx = 13,300 psi, Sy = 7,750 psi, and β=25∘. Determine the normal and shear stresses at this point on the inclined plane shown.
For the case of plane stress, show that Hooke’s law can be written as