I need the answer as soon as possible Question 4. A hollow steel tube 5 m long with external and internal diameters 100 mm and 80 mm respectivelywas found to extend 6.4 mm under a tensile load of 50 kN. Find the buckling load for the tube when used as acolumn with one end rigidly fixed and other hinged. Also find the safe load for the tube, taking a factor of safety

GIVEN DATA LOAD P=150KN LENGTH L=5m OUTER DIA=100mm INNER DIA=80mm CHANGE IN LENGTH =6.4mm FOS=4

Question 4. A hollow steel tube 5 m long with external and internal diameters 100 mm and 80 mm respectively was found to extend 6.4 mm under a tensile load of 150 kN. Find the buckling load for the tube when used as a column with one end rigidly fixed and other hinged. Also find the safe load for the tube, taking a factor of safety -4

Question 4. A hollow steel tube 5 m long with external and internal diameters 100 mm and 80 mm respectively was found to extend 6.4 mm under a tensile load of 150 kN. Find the buckling load for the tube when used as a column with one end rigidly fixed and other hinged. Also find the safe load for the tube, taking a factor of safety -4

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter11: Columns

Section: Chapter Questions

Problem 11.3.16P: .16 Three identical, solid circular rods, each of radius r and length L, are placed together to form...

See similar textbooks

Similar questions

A pinned-end strut of aluminum (E = 10,400 ksi) with a length L = 6 ft is constructed of circular tubing with an outside diameter d = 1 in. (sec figure). The strut must resist an axial load F = 4 kips with a factor of safety n = 2.0 with respect to the critical load. Determine the required thickness t of the tube.
An aluminum pipe column (E = 10,400 ksi) with a length L = 10.0 ft has inside and outside diameters d1= 5.0 in. and d2= 6.0 in., respectively (sec figure). The column is supported only at the ends and may buckle in any direction. Calculate the critical load Pcrfor the following end conditions: (a) pinned-pinned, (b) fixed-free, (c) fixed-pinned, and (d) fixed-fixed.
A round bar of 10 mm diameter is made of aluminum alloy 7075-T6 (see figure). When the bar is stretched by axial forces P, its diameter decreases by 0.0 16 mm. Find the magnitude of the load P. Obtain the material properties from Appendix 1.
A steel pad supporting heavy machinery rests on Four short, hollow, cast iron piers (see figure). The ultimate strength of the cast iron in compression in 50 ksi. The outer diameter of the piers is d = 4.5 in, and the wall thickness is t = 0.40 in. Using a factor of safety of 3.5 with respect to the ultimate strength, determine the total load P that can be supported by the pad.
Determine the allowable axial load Pallowa W 10 X 45 steel wide-flange column with pinned ends (see figure) for each of the following lengths: L = 8 ft, 16 ft, 24 ft, and 32 ft. (Assume E = 29,000 ksi and y = 36 ksi.)
A rigid bar of length L is supported by a linear elastic rotational spring with rotational stiffness ßRat A. Determine the critical load Pcr for the structure.
An idealized column is made up of rigid bars ABC and CD that are joined by a rotational elastic connection at C with stiffness ßR. The column has a roller support at B and a pin support at D. Find an expression for the critical load Pcr of the column.
A steel tube of 5m long ,40mm inner diameter and 80mm outer diameter is used as an euler column. Assuming E=200GPa, find the crippling load of the column when both the ends are hinged.
2 T « A solid round bar 60 mm in diameter and 2.5 m long is used as a strut. One. of the strut is fixed, while its other end is hinged. Find the safe compressive load for this strut, 4 gEuIef'S formula. Assume E = 200 GN/m? and factor of safety = 3. S
1. A copper rod of 50mm diameter is surrounded by a steel tube of 100mm external diameter, the ends being firmly fastened together, subjected to a compressive load of 30kN. Youngs modulus of elasticity of steel is 200GPa and that of copper is 120GPa. Evaluate the stress produced in the copper rod and steel tube.
A mild steel tie-rod has to carry an axial load of 60KN. The maximum permissible stress is 200N/mm2. Calculate a suitable diameter for the rod.
Answer ASAP A round vertical bar is clamped at the lower end and is free at the other. The effective length is 2 m. A horizontal force of 30 N at the top produces a horizontal deflection of 15 mm. What is the buckling load for the bar in the given conditions?