i need the answer quickly Question 4.12A venturi meter with throat diameter of 100 mm is fitted in a vertical pipelineof 200 mm diameter. Oil with specific gravity of 0.88 is flowing upward at arate of 0.06 m/s. A manometer is fitted at the throat and at the inlet pipe withAz = 320 mm. Working from Bernoulli's equation determine the difference inlevel in two limbs of a mercury manometer if it is connected to the tappingpoints and the connecting pipes are filled with the same oil.Question 4.14A pitot-static tube is used to measure the air flowrate in a duct. A manometercontains water is connected to the device to measure a pressure differencebetween static and dynamic pressure.If the flowrate in the pipe is 3.5 m/s and the diameter of the duct is 30cm, determine the water column height in the manometer.Sketch an appropriate diagram for the above system and label clearly(a)(b)point 1, point 2 and the height of water column.Take density of air = 1.2 kg/m³.

Given:d=100 mm =0.1 mD=200 mm =0.2 ms=0.88Q=0.06 m3/s∆z=320 mm =0.32 m NOTE: According to…

Question 4.12 A venturi meter with throat diameter of 100 mm is fitted in a vertical pipeline of 200 mm diameter. Oil with specific gravity of 0.88 is flowing upward at a rate of 0.06 m/s. A manometer is fitted at the throat and at the inlet pipe with Az = 320 mm. Working from Bernoulli's equation determine the difference in level in two limbs of a mercury manometer if it is connected to the tapping points and the connecting pipes are filled with the same oil.

Question 4.12 A venturi meter with throat diameter of 100 mm is fitted in a vertical pipeline of 200 mm diameter. Oil with specific gravity of 0.88 is flowing upward at a rate of 0.06 m/s. A manometer is fitted at the throat and at the inlet pipe with Az = 320 mm. Working from Bernoulli's equation determine the difference in level in two limbs of a mercury manometer if it is connected to the tapping points and the connecting pipes are filled with the same oil.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The plunger diameter of a single-acting reciprocating pump is 115 mm and the stroke is 230 mm. The suction pipe is 90 mm in diameter and 4.2 m long. If cavitation takes place at the suction head of 4 m, the barometer stands at 10.3 m of water, and the water level in the sump is 3 m below the pump cylinder axis.1. Find the maximum allowable speed to operate the pump
PROBLEM 3: A venturi meter with a throat diameter of 6 cm is fitted in a horizontal pipeline of 12 cm diameter with oil of specific gravity 0.88 flowing from left to the right. The difference in level in the two limbs of a mercury manometer connected to the tapping points read 12 cm and the connecting pipes are filled with the same oil. (a) If two pressure gauges are fitted at tapping points, one at the throat and the other in the inlet. Determine the difference between the 2 gage pressure readings in kPa.
The plunger diameter of a single-acting reciprocating pump is 115 mm and the stroke is 230 mm. The suction pipe is 90 mm in diameter and 4.2 m long. If cavitation takes place at the suction head of 4 m, the barometer stands at 10.3 m of water, and the water level in the sump is 3 m below the pump cylinder axis.3.1 Find the maximum allowable speed to operate the pump3.2 What power is expected in overcoming friction at this speed, take ƒ = 0.01
A ventury meter used to measure the liquid from the reservoir. The cross-sectional area at the inlet and throat are 4.536 x 10-3 m? and 1.134 x 103 m? with the flowrate of water is 9167 cm¾s. The level difference of mercury in manometer u tube shows the reading of 266 mm. Determine the flowrate coefficient. Given the specific gravity of mercury 13.6.
Q1: In a venturemeter used for measuring the flow ofoil (-0.85) through a horizontal pipeline, the pipe diameter is 2.4 times the diameter at the throat. Connections are made from the entrance to the meter and the throat to a vertical L tube containing mercury If the difference level between the fluids in the U - tube arms is (x +) in em, where S.N. is student serial number. Neglect friction in the pipe. Find an expression in terms of x for the velocity of the oil in the pipe.
pump with critical cavitation number 0,08 pumps water to a total head of 60 m and temperature of 15°C (Pv=1707 Pa). If the barometric pressure is 98 kPa, head loss in the suction pipe is 1m. Find the maximum value of static suction lift in meters to avoid cavitation in the pump.
Find the pressure head at entry of the pipe, when the pressure of flowing fluid is 275 N/cm? The pressure head at entry (Unit in Pascal)?
A pipe, 12 inch in diameter at A, discharges 4.0 cfs of heavy fuel oil (sp gr = 0.899) into the air at B, where the diameter is 6 inch. If B is 12 ft above A and the frictional loss between the two points is equivalent to 3.0 lb per sq in, determine the pressure at A in pounds per square inch.
In order to measure the pressure difference between two points in a pipeline carrying water, an inverted U tube is connected to the points, and air under atmospheric pressure is entrapped in the upper portion of the U-tube. If the manometer deflection is 0.8 m and the downstream tapping is 0.5 m below the upstream point, find the pressure difference between the two points
If the pressure in a tank of oil (sp gr 0.85) is 376 kN/m2, what is the equivalent head (a) inmeters of oil; (b) in meters of water; (c) in meters of mercury? maintaining the liquid head h at 5.67 ft (d)to what pressure PA be raised in order to double the discharge?
Pressure loss along a pipe pumping water is 6.6Pa. If the pipe is 2.1m long, what angle (in degrees) must it be orientated to the horizontal to overcome the pressure drop?
1A venturi meter is introduced in a 300 mm diameter horizontal pipeline carrying a liquid under a pressure of 150 kPa. The throat diameter of the meter is 100 mm and the pressure at the throat is 400 mm of mercury below the atmosphere. If 3% of the differential pressure is lost between the inlet and the throat, determine the flow rate of the pipeline. Can you draw the figure and complete solution: